Made by a Fabricista: Striped Duster

Have you ever run out to buy a pattern with the intention to make it right away, but then you get side tracked and days become weeks that become months? Well, that is what happened with early fall pattern, Simplicity 8177. I purchased this pattern this summer with plans to make it right away for the fall, because I love dusters. Whelp, that didn't happen, but I did finally sew it up this week. Even though I'm a season behind, I'm calling this a win, because it didn't get pushed back into next year.

I originally selected a brown and orange tweed wool suiting for this project (here), but then this navy and cream striped suiting (here) arrived and I quickly switched to it. I love, Love, LOVE stripes, my stash proves it. What I always forget when buying striped fabric is the added work of matching stripes when sewing. LOL. It is not difficult but it does take time. Sadly time is what I was short on due to some delays with FedEx (not Fabric Mart's fault). The stripes don't line up as nicely as I would like in a few places, but I have a finished coat to show you!

The stripes are about 1" wide and I think its the perfect scale for this duster. I didn't have any trouble sewing with it, but it is a boucle and prone to tons of fraying. I serged all of my raw edges except for the bottom hem. This suiting is fairly lightweight and I was concerned initially about using it for this project, but in the end I feel it worked especially for fall or warmer winter days.

This was a straight forward sew as there is no collar or fasteners. The two piece sleeve did add an additional seam which meant more stripes to match. One arm is off ,but I didn't have the time or the patience to correct it as I didn't notice until I had attached it to the body.

I decided to add a lining for a more finished look. I created the lining by cutting out the front, back and sleeve pieces and then tracing the facing pieces on the front and back pieces. I then added 5/8" seam allowance outside of that traced line and removed that portion to account for the facings. After sewing the lining pieces together I attached the raw edge to the facing of the jacket right sides facing.

I hemmed the sleeve lining and sleeve separately and then hand stitched the lining to the stitch line of the jacket I had planned on using the same method to finish the hem of the coat but somehow my lining was much shorter than the jacket. I'm not sure how that happened, maybe I was sleepy when I cut the lining. I had a bit of trouble with the vent and the lining. This led me to run out and buy double fold bias tape to enclose the raw edge of the hem. I simply did a narrow hem on the lining fabric.

The vent of the coat was no issue but I wasn't sure how to work the lining into the vent. So I sort of made this part up. I sewed the vent of the duster as instructed and then simply folded back the vent on both side of the lining. It doesn't show but I know this is not the correct way. I will be researching a proper way for the future, but for this project I made do.

I did omit the flaps because I don't quite get the "faux flaps"and the stripes are busy enough. I really like this duster and the only change I would make in the future would be to lengthen the sleeves by an inch and make the pocket larger. This pocket is teeny. Maybe I shouldn't have used a 5/8" seam allowance but even if I had made the seam narrower I still believe the pocket isn't deep enough. I will fit my large Samsung S7 but my hand does not fit comfortably. Then again I do have big hands.
I will make the project again, though I don't know when. I have such a long list of projects to sew over Christmas.

Check out my blog for a full pattern review and more pictures! TipStitched

Made by a Fabricista: A Wardrobe Staple for Spring - A Denim Coat

Hello Sewing Friends! It’s Sharon with Sharon Sews with my latest Fabricista make – a denim coat for spring. Denim is a wardrobe staple for many of us, and even more so this year with denim on denim looks coming back in style. The denim I used is a medium weight cotton/lycra blend with about a 20% stretch selvage to selvage. Fabric Mart always does an amazing job photographing and describing their fabrics, yet I still gasped in delight when I opened the package containing my denim. It was even better than I had anticipated. This fabric would have worked well for a traditional denim jacket – one with button front closure, chest pockets with flaps, and a collar. However, I have wanted to sew this open front coat with kimono inspired sleeves and big patch pockets since February 2021. I saw it in that month’s BurdaStyle Magazine, bookmarked the page, and promptly forgot about the coat. It’s coat #105 if you’re interested in sewing one for yourself. Fortunately, I went on an organ

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month! This year is the year I challenge my sewing skills. I have wanted a moto jacket for some time. Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one. The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting. Remember when I said I wanted to challenge my sewing skills? 😉 This fabric was beautiful but fragile to work with. It was a great mental challenge that had me problem solving before sewing to avoid any potential problems. I first traced out the pattern onto tissue paper to determine the fit. I used scrap cotton fabric to sew up a “practice run” of the jacket. I was pleasantly surprised at how easily the jacket comes together. I sewed up the muslin in one evening. It was time to cut into the beautifu

Made By A Fabricista: My Version of the Infamous DVF Wrap Dress

Just in case you are not aware, the iconic Diane Fustenberg wrap dress has turned 50 this year. In celebration, Vogue has re-released the DVF Wrap Dress pattern, which now comes in extended sizes. This dress is so classic and fits many different body types. I got a hold of this pattern and decided this would be my birthday dress this year. This pattern is categorized as a Very Easy Vogue pattern, and I would have to agree with that. Wrap dresses are usually relatively simple to put together since there aren’t that many pattern pieces to sew together. I made View A in a size 22 and the only modification I made was to shorten the hem by 6 inches. I will say that since I used a Ponte Knit , I could have gone down to a size 20. I didn’t read the fabric suggestions before picking my fabric. I’ve always remembered seeing the DVF Wrap dress in knits. After reviewing the fabric suggestions, they do say that you can use soft fabrics, like a Challis or a Chambray. As I mentioned, I’ve alwa

Fabric Mart Fabricistas

Search This Blog