Skip to main content

Made By A Fabricista: Liberty Snow Day


Hi everyone!

While we’ve been blanketed with snow out here in Southeastern PA, I decided to conquer my fear of button holes and make NewLook pattern N6749. I was able to snag a few yards of the Jess + Jean print Liberty of London Tana Lawn for it.

It’s always exciting when Fabric Mart is able to get Liberty fabrics in! I always make sure to grab some.  Cutting into a beautiful piece of tana lawn is scary every time. The fabric is such good quality, I’m afraid to mess it up! I had to be extra careful as this is also the first directional pattern I’ve worked with. But one of my assistants made sure all of my pieces were laid correctly.

Something I wanted to try out with this dress was finishing the inside seams using the overlock stitch on my domestic machine. Normally I would french seam, but it was nice to not have to worry about cutting seam allowance in half, sewing, trimming, flipping, and sewing again. Next time I would cut the seam allowance back before overlocking, but I think the inside still looks nice and neat! 


I wasn't completely sure how to finish off the gathered waist edge in this method. I thought about binding it off but overlocked it carefully in the end. I’ll keep an eye on this seam after washing.

I picked up a Simflex Sewing Gauge to help space out my buttons and button holes. My fist sewing machine had a button hole foot, but did such a terrible job at making the button holes that I’ve avoided them for the last couple years. But after making a few test button holes on some scraps of the tana lawn, this machine doesn't seem to have those issues! No more avoiding button holes for me!

I definitely have some fit issues in the bust, but it’s perfect in the waist.  Might 2025 be the year I learn to do bust adjustments? Stay tuned!


Lastly, I’m in the market for a serger! I’ve never had one and only used a serger twice before. I’m looking for something I can have for a good couple years but won’t break the bank and that doesn’t require a physics PhD to thread and operate. If anyone has any suggestions please leave them below!  Thank you!

KAYLA  | @nebulanovem

Comments

  1. Very pretty! Spring is coming closer every day and you are ready with this lovely dress! I am also a little afraid to cut into Liberty fabric - I have one piece and am carefully evaluating what to do with it :)

    ReplyDelete
  2. It looks perfect! I don't see a problem in the bust are, but you can do what I do ...choose a different bra! It can really make a difference.

    ReplyDelete
    Replies
    1. I'm glad it doesn't show! I'm standing with my shoulders all the way back. If I stand normally or slouched at all the front moves away from my body. I'll definitely have to see if any of my other bras help, that's good advice! Might have to just tape that sucker down though, haha!

      Delete
  3. The Brother 1034DX is a great machine, very reliable, and available at Big Box stores everywhere at a terrific price. It is four thread and has a free arm feature. Super simple to thread too, and all of the stitches will you need for your projects.

    Your dress is beautiful! Thank you for picturing your button/buttonhole guide. I forgot I have one until I saw yours. Now where did I put it?…

    ReplyDelete
  4. I love my Imagine serger from BabyLock ! The jet-air threading system makes it so easy to use !

    ReplyDelete
  5. I had a top of the line Bernina Serger that converted to a coverstitch as well. It was in the shop and I needed a serger right away for a job I was doing so I bought a Juki serger under 500.00 dollars to have as my back up. The Juki serger is amazing! I have had it for several years and I love it. I sold the Bernina and bought a stand alone coverstitch machine. Haven't regretted it once. It's easy to clean and always forms great stitches. Cannot recommend any more highly.

    ReplyDelete
  6. What a beautiful dress and it fits you so well.

    ReplyDelete
  7. I have a Bernina. My original serger was an old, used, Pfaff which was difficult to use. I recommend going into shops and test driving to see what you like best. Modern sergers are easier to use than the old models from the 70's and 80's that I started on. If you buy from a good store, classes are included, and this can be well worth the extra money.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Recent Posts You Might Like

Meeting Endless Summer Energy with a Maxi Dress

How are the temps still so hot?! I’m trying to make the best out of a blazing situation with a gorgeous swishy dress made in a splendid graphic print in an attempt to keep my cool when I am very much not. The heat persists, but so do I (while wearing sundresses)!  I really wanted a full length, all-fancy-design-details-included version of the new Chalk & Notch Noe Tank Dress since testing the pattern. This is View C. This version features a beautiful open back with a tie closure and the long gathered hem for maximum impact.  I chose the higher of two necklines. The pattern features full lining and I used the same fabric for both. I prefer to avoid any peeking-issues the easy way.  As I was scrolling through the challis options on the Fabric Mart site, this one stood out immediately, a beautiful kelly green with big abstract swipes of aqua. Simple, bold, (non-directional!), all of my favorite characteristics necessary for a showstopping dress. I wanted something very ...

The Perfect Plan for this Linen Blend! Until I Changed My Mind.

Hello Sewing Friends!  It’s Sharon from Sharon Sews with another Fabricista make.  When I saw this linen blend designer fabric on the Fabric Mart Fabrics website, I was intrigued.  After all, I, like many of you, love to find designer fabrics at an affordable price. It is a linen/nylon/rayon/Lycra blend, and I wondered what the designer had created with the fabric as I wasn’t familiar with that combination of fibers.  Surprisingly, I discovered a sleeveless, lined, mid-length vest in the same color with an almost identical fabric composition. Perfect! I’ve been wanting to sew a longer vest with matching pants, and that discovery confirmed this fabric would work beautifully for the look I had in mind.  The vest I’m wearing, from the June 2026 Burda Style magazine, it is not what I was originally going to make.  You see when I found the designer’s vest, I remembered seeing a Butterick pattern that was almost identical.  I ordered the pattern excited to...

Sewing With Intention: New Look 6106 and a More Coordinated Wardrobe

Sometimes a sewing project begins with a beautiful piece of fabric or a pattern you just have to make. This one began with my closet. Recently, I did a major closet purge. I took a good look at what I actually wear, what I kept reaching for, and—maybe more importantly—what was missing. Once the pieces I no longer loved or wore were gone, something became very clear: I want to be more intentional about what I sew next. Instead of sewing individual pieces that I love but don't necessarily wear together, I want to build a wardrobe where my handmade garments coordinate with the clothes I already own—and with the pieces I'm planning to sew next. For this month's Fabricista project, this beautiful lightweight shirting from Fabric Mart turned out to be a wonderful place to start. The Fabric That Started It All Fabric Mart provided this beautiful oatmeal and black heathered shirting , along with the matching thread for my project. One of the things I love most about this fabric is ...

Fall + Flannel = Shacket

If there is one piece that transitions easily between crisp fall mornings, mid-day warmth, and chilly autumn nights, it’s a shacket. Today, I’m excited to share my latest Fabric Mart make: the Ellie and Mac Patterns Connie Casual Shacket, sewn in a dreamy plaid flannel coating fabric . Here’s a glimpse at how it came together, along with a few construction tips for planning your own version! The Ellie and Mac Patterns Connie Casual Shacket pattern offers plenty of options needed to make the perfect transitional top layer for fall. With a relaxed body, oversized sleeves, three lengths, and a curved or straight hem option, you can make your dream shacket a reality.  For this sew, I selected a plaid flannel coating fabric with a soft blend of sage green and cream tones from the Fabric Mart website. Heavyweight flannel is ideal for a shacket because it provides structure and added warmth. As a bonus, this particular fabric is extra soft and snuggly, which I love. In addition to the fa...