Skip to main content

Made By a Fabricista: The Final Draft

Here we are again with my attempt at sewing a bra!
I didn't feel so successful in  my first attempt and was a bit discouraged.
But I'm willing to give it another shot.

For my final draft fabric I chose an activewear knit and used the stretch lace again.
I also have a bit of nude soft elastic I found in our brick and mortar shop in Sinking Spring that I will use.
All of my supplies are from Fabric Mart.
View some of our activewear knits here: http://www.fabricmartfabrics.com/xcart/Active-Wear-Knit/
Look for Stretch Laces in our lace section: http://www.fabricmartfabrics.com/xcart/Lace-fabrics/
Before cutting on my "good pieces of scrap fabric" I took another look at the PDF pattern.
I marked each piece with what it was since after cutting out the pattern, I lost some important information which led to me getting terribly confused and eventually took a long extended break from sewing the bra.
I then traveled back to the Ohhh Lu Lu blog and followed her pictures on how to form the cups.
Very helpful! I don't know why I wasn't doing this before!
 I was still nervous about adding the cup but I  heavily utilized her blog to assist.
Visit here blog how-to on forming cups and inserted padding: http://www.ohhhlulu.com/2012/08/ginger-swimsuit-sew-along-assembling.html

 I was surprised how easy it actually was to put in the bra cups.  I had to redo them a couple times until they set in correctly. You basically have to hold the cups to your chest to get them in the right position, which looks rather awkward, but it works!
 I sewed a quarter inch seam allowance around the cup pulling the knit out so it would lay smoothly.
It took a total of about 5 minutes to actually get the cups in and about 7 weeks of me worrying. Ha!

Now I'm ready to finish up the bra! Just need to attach straps, elastic, and sew it all together!
A little tip to attaching the lower bra portion: stretch your knit slightly to get the point to line up to the point in the center.

 I also started sewing the elastic to the undies. I was quite worried about this too, but it is also surprisingly easy! I just pinned, sewed, and the tucked under, and sewed again!


Almost there!
Be back soon to show you the finished product!

Happy Sewing!
Kaitlin


Comments

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Recent Posts You Might Like

Made by a Fabricista: What to Make with Silk Taffeta

You may have noticed that Fabric Mart has a *HUGE* selection of silk taffeta right now.  A lot of it is either large plaid or large stripes.   I was curious about it, and not really sure what I could make with it, but I just knew it would be gorgeous fabric and had to play around with it.  Turns out, it's actually great for quite a range of projects!  The dress above is my third project. Let me show you the first two. My first was to make some queen size pillow shams.  They are the plaid ones in the back of the photo.  I also made the two printed ones in the center from another Fabric Mart home dec fabric special!  I wanted to make the covers removable with a zipper, and include a braided trim.  As luck would have it, I found a whole card of braided trim at an estate sale that worked with my taffeta for just $2! To start, I used a zipper foot to stitch down the braided trim all around one side of the pillow. Then I serged ...

Made By A Fabricista: Mechanic Chic!

When it comes to buying ready-to-wear garments as a sewist, I only ever spend in three categories: heavy duty winter jackets (life in Maine!), bras… and jumpsuits! I love a good jumpsuit, but unfortunately the ones I used to buy have been impacted by the tariff situation and I can’t get them affordably anymore. This can only mean one thing, folks: it’s time to roll up my sleeves and sew my very first jumpsuit!  When I started planning for this project, I knew I wanted to use a heavyweight linen for cozy comfort in the fall and breathability in the summer. I wanted something that would wear beautifully and soften with age, and something with neutral tones that could go with everything. Naturally, when I came across this 100% linen canvas on Fabric Mart, my heart skipped a beat! I love the ikat-inspired geometry and something about it reminds me of leopard spots too. Bold yet wearable! I am pretty sure this fabric was intended for home decor which I don’t mind at all and in fact of...

Made By A Fabricista: Tried and true summer basics that fit.

Happy Summer Friends! As I am writing this, we are headed into a nasty heat wave…so the timing could not be better to share two of my favorite summer patterns and fabrics.  But first, let me tell you about the fail I had heading into this month’s blog… As Fabricista’s, we get to pick out fabric for each of our blog submissions. I fell in love with this gorgeous lilac jacquard knit that I thought would be perfect for a pop of color in my summer wardrobe. But I made a fatal error - I grabbed a pattern I haven’t made for years, quickly went up one size to account for a few new pounds, and sewed them up. And they don’t fit, will NEVER fit, and will never be worn. Sigh…when will I learn?? Here’s a flat lay pic so we can at least look at the lovely fabric: The lesson I learned (relearned!) is that just like with off the rack clothes, the things that worked well for me years ago don’t work well for me today.  And that’s the case with both tops and bottoms. So I went back to two patt...

A Yard And Change

Do you have a fabric that you love and has been hanging around but is too small to use? Maybe you found a wonderful fabric with a super cute print but there's only a yard left.  I've got a few projects I worked on all with roughly a yard of fabric. And I have a few tips for making that yard and change go further! Cutting Layout: You can get a lot more mileage out of a yard of fabric if you can get creative with how you lay out your fabric. Cutting things single layer will give you the most control. My favorite thing to do is unfold the fabric and fold the selvages in to meet in the middle. That gives me two folded edges to work with. I had to overlap these to get enough width for the tank top. Just make sure that your pattern pieces don't also overlap!  This one was especially fun for me because I really loved the print on this swimwear knit but am not yet up to sewing swimwear. But a nice flowy hiking tank is perfect for this! In the future I'd love to experiment with...