Skip to main content

DIY Tutorial: Pillow Book Holder

I don't know about you, but I have an obsession with Pinterest. I find so many great ideas and want to try all of them right away! I recently came across a picture of a pillow book holder. And what might this be you ask? It is a pillow you can use to rest your book on as you read. It is different from a regular pillow because it has elastic bands to hold the book in place and a ribbon to hold your page. This project is not only fun for adults but would be great for children too! It only took me about an hour from start to finish and you'll be snuggling up on the sofa with a good book and your pillow book holder! 

Supplies: 
- 1/2 yard of fabric (I used a silk brocade from my stash, but you could use virtually any woven fabric.)
- thread to match
- 1 yard of coordinating ribbon
- 1 yard of elastic
- fiber fill (1 bag, depending on how big your pillow will be.)
- basic sewing supplies



** Have a book and/or magazine handy when starting this project. I based my pillow off of magazines because I read more magazines than books. 

1) Cut two rectangles about 3" larger than the book/magazine you are replicating. Remember to measure 3" on ALL FOUR SIDES. My rectangle was 16x22". You may choose to make it smaller or larger depending on the size of the reading material. Keep in mind that because pillows curve as you get toward your seam, you don't want your magazine/book to curve with it. You want it to sit on top of your pillow. 

2) Using one of your rectangles (face up), make a mark in the middle of the long side and pin the ribbon on both the top and bottom. Mark where you would like your elastic to go. You may want to use your book as a guide so that when the pillow is finished, the elastic will hold your book in place. Cut the elastic 1" shorter than the pillow. You want the elastic to be taut so it can hold the pages in your book. Pin elastic in place.


This is what the front of your pillow should look like. 

3) Pin the other half of your pillow right sides together. Sew all four sides, leaving an opening large enough to stuff you pillow. Cut corners and turn right sides out. Using a turning tool, carefully push the pillow corners out.


4) Stuff your pillow to the desired fullness. I like a decorative pillow to have a smooth, firm finish, so I used about 1 1/4 bags of fiberfill. Amount of fiberfill will vary depending on how big your pillow is. Hand sew the opening of your pillow closed. Voila! You have a complete pillow, ready to read an afternoon away!




Tips:
- To prevent your ribbon from fraying, you can burn the ends! This only works on polyester or nylon ribbons. Using a lighter, glide the ribbon end through the flame. Do not allow it to fully ignite, otherwise it will start to curl. I recommend doing this over a sink. Burn the ends before you attach them to your pillow!

Left: Burned End, Right: Non-burned End
- So many different fabrics could be used for this project. You could try a beautiful brocade for an elegant look, fun cotton print to match your personality or how about a worsted wool or blend suiting for a traditional design.

Happy sewing! 
~Julie 

Comments

  1. Thank you, Julie!
    Been looking at so many different styles online for months now & can't justify $20 & ⤴ for it! Had this acct. For a few yrs. but only visited a handful of times.

    Appreciate the super simple way you explained. I have a LOT of rectangular pillows so I may just cover & add your cool elastic idea, with a ribbon book mark! Really helps with the pics!

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Back In The Saddle

If you don’t know in October my beloved Bernina sewing machine blew a fuse and started smoking while I was using it. She went to the shop for repairs, and then I moved. So it’s been a bit since I’ve sewed last and I’ve had trouble getting back into it. I knew I needed a simpler project to get me going again. Julie sewed up a Jarrah sweater recently ( restock coming soon! ) and gushed about how simple and rewarding a project it was. Then we got in this beautiful wool/cashmere sweater knit from England. I was seeing lighthouse keeper, sheep herder in the highlands. I knew it had to be my Jarrah sweater. I did lengthen the bodice by 3 inches. I actually sewed up a mock up with the curved hemline, but decided that wasn’t for me and went with the straight hem. Of course I took zero photos of said mock up.  Oops. Otherwise I sewed it up in a size 6 as is. Using the serger this really does sew up quickly. The dropped shoulder creates clean, simple lines that make it easy to sew u...

Made By A Fabricista: Simplicity 8847

Hi everyone, this is Byrd with my latest Fabricista make!  Is it too early to start thinking about Valentine’s Day? Because this fabric is giving all the heart vibes. With rich red hearts scattered across a dark base, it feels festive without being over-the-top—and completely wearable well beyond February. This time around, the fabric completely stole the show. I used a Dark Navy/Crimson/White Polyester/Lycra Hearts Print Brushed Sweater Knit by a NY Designer , and it was love at first sight. Even though it’s labeled navy, in person it reads more like a deep black base with these beautiful red hearts throughout. When you zoom in, you’ll also spot the designer’s name and a tiny smiley face woven into the print - such a fun, unexpected detail. This fabric immediately spoke my name when I saw it online, and it absolutely lived up to the hype. Before sewing, let’s talk fabric care and prep - because it matters. This sweater knit is wash and dry friendly, which makes it practical for e...

Made By A Fabricista: From My Imagination to My Closet

One of my favorite parts of sewing is taking an idea that exists only in my head and turning it into something I can actually wear. This project was exactly that—a quick, intuitive exercise in imagination, experimentation, and trusting my process, brought to life with Fabric Mart’s sweatshirt fleece. I started with a loose concept rather than a fixed plan. I knew I wanted something comfortable, but still fashion-forward—elevated loungewear that felt intentional rather than basic. Fabric choice was key, and Fabric Mart’s sweatshirt fleece ended up being the perfect foundation. Working with Fabric Mart Sweatshirt Fleece This fleece was an absolute dream to work with. It has a slight stretch, which made the final outfit incredibly comfortable while still maintaining structure. After pre-washing, the fabric held up beautifully with no pilling or texture issues, which is always a big win. It sewed smoothly and handled like a fabric that wants to be worn, not babied. Safe to say, I’m offici...