Made by a Fabricista: Sewing with Mesh Knits

I'm going to interject into the Fashion Challenge with a tutorial on mesh knits!

Over the weekend, I was working on an inspiration piece for our Julie's Picks customers. I used a mesh print and jersey knit that will be included in the November Julie's Picks. (Sorry, these fabrics are only available to JP member's, but we have plenty of others available on our website.) Some people may be intimidated by mesh knits, but have no fear! I did some research on how to sew with them first and was prepared from the beginning. They are easier to work with than you think. Think of them as a lightweight or sheer knit.

Here are a few tips I researched, then used in my project:

1) Sew slowly and with a new needle. It is always good to start a project with a new needle, but I felt like if I had a dull needle it would pucker the fabric. Because I was sewing a mesh to a knit, it was even better. The knit and mesh stick together and allow for easy sewing. There were only two places I was sewing only with mesh: the hem of the mesh knit bodice and the sleeve hem. I stretched the mesh slightly and also used a stay tape, which helps keep it in place through wear.

2) Use stay tape if only sewing mesh. The stay tape helps keep it in place through wear.

3) Pre-wash your mesh. It is recommended to hand wash mesh knits because of pulls and puckering. I will machine wash my shirt, but probably by itself or in a lingerie bag on gentle cycle. Do not put it in the dryer, you don't want to risk it melting! Lay flat to dry.

I used Angela Wolf's Ruched T pattern. We carry this pattern on our website, but it is sold out right now. We have it on order and hope to receive it in the next couple of weeks! This pattern is really easy and fits great! I don't like fussing with patterns and you don't have to with this one. I made this pattern before so knew what to expect. It comes with three different sleeve variations and five different collars. I selected the regular collar and decided to do long sleeves without ruching. I also did not do ruching on the side seams.

Here you can see the bodice hem. I pre-hemmed the mesh knit, and pressed a line in the knit so I knew where the mesh knit hem needed to end. Then sew right sides together as usual.

Since I made the pattern before, I had made note that the bodice needed to be cut about 3-4 inches shorter for a non-ruched top. I cut the jersey knit out first, then the mesh knit. I decided to hem the mesh and knit separately. When laying the mesh and knit together, I pre-hemmed the mesh. Then aligned the mesh piece on the knit. The pattern directions tell you to press a hem on your fabric before sewing the side seams, so I did that. That also helped me determine where the bottom of the hem on the mesh knit needed to be because I didn't want the mesh to go past the knit.

After I had the bodices sewn at the shoulder and the hem in the mesh print, I attached the sleeves. The directions call for you to do this, rather than on some patterns they want you to sewing the side seams first. (I really don't like doing them that way, so I was thankful for this direction in the pattern!) I laid the mesh knit only sleeve on the right side of the bodice pieces and sewed them together. Then I sewed the side seams together. I had to bring the sleeve in a little bit. I think it is the nature of the mesh knit --- a normal sleeve is a little looser, and I wanted the mesh to be a bit more snug, but not tight.

When sewing the sleeve together, I used stay tape to keep it stable. I also used it in the hem of the bodice and sleeves.

I made the standard collar out of solid knit for a very RTW look. I also top-stitched just under the collar on the mesh. I love the way it turned out! I especially like it because it was quick, easy and fit without hardly any changes. I fooled a lot of people--they asked me where I bought my shirt!

Don't be afraid of the mesh knits. They are harmless. Plus if you add a regular knit fabric to them, it becomes even easier!

Made By A Fabricista: Basics vs Fun Clothes

Every summer I make flowy, pretty dresses because they are so fun for me to make, wear, and they keep me cool as temperatures rise. But when the days get shorter and autumn rolls around, I’m not always confident on how best to transition my summery dresses into garments that will allow for the seasonal changes. In an effort to be more intentional about maximizing the use of my clothing, I thought long and hard about what I wanted to make for August. It’s been a hot summer in New Jersey. From what I can see, it’s been a hot summer across the US. Looking for clothing that will keep me cool, perhaps hide some sweat stains, and allow me to transition between seasons, I decided to make separates that would pair well with each other and allow me to mix and match with the rest of my wardrobe. For the top, I wanted a basic tank top, something I could layer later on. For the bottoms, I wanted flowy, summery pants that can last into brisker weather or become phenomenally cozy in front of my wint...

Made By A Fabricista: Sewing Summery ITY

Hi sewing friends! I’m dropping in to share a few makes sewn with ITY fabrics and inspire you to try out this slinky, cool-to-the-touch fabric for hot weather if you haven’t yet, or to recommend some patterns that work fabulously if you already love it. This is by far my favorite knit to wear in summer. Since it moves easily there’s lots of airflow, and it just skims the body. More often than not, it has a four-way stretch that doesn’t grow when worn, so it works great for loads of styles. ITY stands for Interlock Twist Yarn and the knit gives it some wonderful drape and stretch. There are lots of different weights and even some differing textures. Because it’s so fluid, the fabric really resists most wrinkling. I’ve sewn three different weights and prints here to show off just what ITY can do! This white floral is a lighter weight and features a slightly crepe-textured finish, and I think that combined with the large and spread-out floral makes it quite elegant and eye-cat...

Made By A Fabricista: From Paris with Love!

Bonjour! I am still in bliss from my recent trip to Paris!! It was much more than I expected and I absolutely fell in love with the city. I can honestly see myself living there one day. I knew before leaving I wanted to make something to fit into the Parisian landscape because I knew it would be a special opportunity. I was inspired by one of my favorite fashion creators Juliette Foxx. Her checked gingham corset and wide leg pants were on my list to remake. For fabric I used this red and white pin stripe denim twill and deep red sateen for the pants. The pattern I used for the corset was McCall’s #M8182 with a few modifications. The fit was a little large so I took it in along the sides and shoulder seam. I then lowered the neckline since the shoulders were taken in. I used the sateen as my lining which gave a great contrast. My pants are my unreleased pattern which happens to be exact from the inspiration. I drafted these last year and have been wo...

Fabric Mart Fabricistas

Search This Blog