Skip to main content

Reader's Pick Sew Along #2 - Bodice Pleats

Image
By
On Monday when I introduced Step #1 - Cutting, Alterations and Thread, I mentioned about lengthening and shortening the bodice piece. Since then, the person that asked about this tried it out, using the directions from Handmade by Heather B, and it worked! So if you haven't cut out of your good fabric yet and need to do this step, give it a try!

Since we are working with knits, it is important to make sure you have a STRETCH NEEDLE. One thing I found when I was starting to sew with knits, was that my seams and hems would break because there was no give. Knits stretch with you, the thread does not. Some sewing machines have a knit stitch. (Check your manual for this info.) If your sewing machine doesn't, set your machine to a straight stitch, but modify your zig-zag stitch ever so slightly. (Or use the zig-zag, but on a very fine zig-zag, almost straight! This setting depends on your sewing machine.) I have a Bernina and it comes with a knit stitch. I don't care for it, so I use a straight stitch with a slight zig-zag. 

Here is a photo of my settings: 

I do tug slightly on a knit when I'm sewing with it, but not too much. You don't want fabric ripples!

So today we're going to make the pleats for the bodice. I'm not going to go through every step they tell you to do, because that would just be repetitive, but give you hints, reminders and suggestions that go along with the step. 

When making your pleats you may fumble around with matching up your lines and sticking the pins into place. Starting from the end of the fabric, I pierce the pin through the line and then through the line on the other side of the fabric. This ensures that you've got one section all lined up. Then go back into the line with the pin and match up the line again. 



When sewing your pleats, be sure to keep the other pleats out of the way! You don't want to sew them all together! 

Listen to the directions with they say press and baste your pleats up or down! It definitely helps the dress look great in the finished product!  


 After your pleats are in place, use some seam binding to stabilize your shoulder seam. I used a transparent seam tape called, Seams Great Binding by Dritz.


That's all for today! This step was easy. The next couple of steps get more complicated. 

Share your fabric choices on our Flickr page! Some of you have shown us what you are using and we'd love to see more! 

Any questions or suggestions? Comment below. 

Comments

  1. dinagideonApril 9, 2014 at 10:49 AM

    Thanks for the great info. :) I want to add that I definitely stabilized the neckline bit, too, so that it wouldn't stretch out of shape when sewing it up. My muslin is far from perfect, but that darn neckline looked great. I *think* I may have used stay tape...

    When is the next part of the sew along set to go? I want to make sure I stay in step with you all and don't get behind. I have a few projects over the next few weeks, so I have to prioritize my sewing tasks.

    ReplyDelete
    Replies
    1. Fabric MartApril 9, 2014 at 10:02 PM

      Hi Dina, the next step will be posted on Friday. You will have all weekend to work on that. And for people catching up, they have the weekend to do also!

      Delete
  2. dinagideonApril 9, 2014 at 10:51 AM

    No wait, the neckline has stretch, so I must have used some kind of knit stabilizer. Will check my notes and dress muslin a bit further to see what I did to stabilize the neckline...

    ReplyDelete
  3. dinagideonApril 9, 2014 at 11:08 AM

    Okay, last comment, I promise. I just checked the neckline, and it appears I didn't use a stay tape or stabilizer of any kind. Sigh. What I think I did was staystitch the dress neckline to prevent stretching, but then used the "lightning bolt" stitch on my Bernina to get stretch on the finished bit of the neckline.

    I only remember this part so clearly because so many reviews of this pattern mention making sure to not stretch out the neckline or else it will gape. And that is the last thing I wanted from my finished product.

    ReplyDelete
    Replies
    1. Fabric MartApril 10, 2014 at 9:19 AM

      I did notice the neckline comment brought up a lot in other reviews of this pattern. We will talk about this in the next step, which will be posted on friday!

      Delete
  4. Sharon G NicholsApril 9, 2014 at 10:35 PM

    How do you feel about using clear elastic on the shoulder seams instead of stabilizer? I've used it and like it, but are there times stabilizer would be preferable?
    Thanx!

    ReplyDelete
    Replies
    1. Fabric MartApril 10, 2014 at 9:16 AM

      Hi Sharon,

      I think that clear elastic would be fine, as long as you don't pull on it to the point of puckering your seam. If you are comfortable with it, I would say go for it! The thing I liked about the seam tape I used was that it did not stretch, therefore I didn't have to worry that it would pucker.

      Delete
    2. Sharon G NicholsApril 10, 2014 at 3:57 PM

      That makes sense. Thanks for the reply!

      Delete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Basics vs Fun Clothes

By
Every summer I make flowy, pretty dresses because they are so fun for me to make, wear, and they keep me cool as temperatures rise. But when the days get shorter and autumn rolls around, I’m not always confident on how best to transition my summery dresses into garments that will allow for the seasonal changes. In an effort to be more intentional about maximizing the use of my clothing, I thought long and hard about what I wanted to make for August. It’s been a hot summer in New Jersey. From what I can see, it’s been a hot summer across the US. Looking for clothing that will keep me cool, perhaps hide some sweat stains, and allow me to transition between seasons, I decided to make separates that would pair well with each other and allow me to mix and match with the rest of my wardrobe. For the top, I wanted a basic tank top, something I could layer later on. For the bottoms, I wanted flowy, summery pants that can last into brisker weather or become phenomenally cozy in front of my wint...
3 comments
Continue Reading »

Made By A Fabricista: From Paris with Love!

By
Bonjour! I am still in bliss from my recent trip to Paris!!  It was much more than I expected and I absolutely fell in love with the city. I can honestly see myself living there one day. I knew before leaving I wanted to make something to fit into the Parisian landscape because I knew it would be a special opportunity. I was inspired by one of my favorite fashion creators Juliette Foxx. Her checked gingham corset and wide leg pants were on my list to remake. For fabric I used this red and white pin stripe denim twill and deep red sateen for the pants.  The pattern I used for the corset was McCall’s #M8182 with a few modifications.  The fit was a little large so I took it in along the sides and shoulder seam.  I then lowered the neckline since the shoulders were taken in. I used the sateen as my lining which gave a great contrast.  My pants are my unreleased pattern which happens to be exact from the inspiration.  I drafted these last year and have been wo...
5 comments
Continue Reading »

Made By A Fabricista: Sewing Summery ITY

By
Hi sewing friends! I’m dropping in to share a few makes sewn with ITY fabrics and inspire you to try out this slinky, cool-to-the-touch fabric for hot weather if you haven’t yet, or to recommend some patterns that work fabulously if you already love it. This is by far my favorite knit to wear in summer. Since it moves easily there’s lots of airflow, and it just skims the body. More often than not, it has a four-way stretch that doesn’t grow when worn, so it works great for loads of styles.  ITY stands for Interlock Twist Yarn and the knit gives it some wonderful drape and stretch. There are lots of different weights and even some differing textures. Because it’s so fluid, the fabric really resists most wrinkling. I’ve sewn three different weights and prints here to show off just what ITY can do!  This white floral is a lighter weight and features a slightly crepe-textured finish, and I think that combined with the large and spread-out floral makes it quite elegant and eye-cat...
7 comments
Continue Reading »