Skip to main content

Pretty Peplum Top Sew Along: Finishing + Turning the Peplum into a Dress

We're in the home stretch! All we have to do is stitch the bottom hem and sleeve hem, then we're finished! I wouldn't normally talk about what to do for this, but Pamela has an ingenious way to get a really nice hem. I have been using it on other projects too and it's been great!

Pamela uses stay tape to finish all her hems. She likes to use SewkeysE brand, which we talked about HERE. You can also refer to the video on stay tapes in that blog post. SewkeysE has a 1" Double sided Fusible Stay Tape. If you are using this brand of stay tape for this project, you will need to cut the stay tape down to 1/2". I did not have this brand of stay tape at the time, so I found Pellon EZ- Steam II - a Two sided pressure sensitive Fusible Tape at a local fabric store. You will see that I used it in the photos below, but I'd like to try SewkeysE in the future. It was hard to get the tape off of the fusible part once it is fused down. But once you got it apart, it peeled right off.


Press the stay tape to the wrong side of the hem edge. Since the peplum is curved, you will need to cut the stay tape like Pamela mentions in the video. Remove the paper backing, fold up using the edge of the stay tape as your guide and press. Stitch in place! How easy is that? Do the same for the sleeves. If you make the longer sleeves (or any other length than the cap sleeves) use the 1" stay tape. For the cap sleeve cut the 1" down to 1/2".




I know a few of you were wondering how you could make the peplum top into a dress. I was curious too and decided to give it a try. It's actually really easy! All you need is some extra fabric (I would say about 2 yards extra), pattern paper, a yard stick or long ruler and a marking tool. The amount of yardage you need will depend on how long you want the dress to be.

Fold the fabric in half, I like to do right sides together. Then line up the peplum front piece with the top of the fold. You want to make sure you have plenty of space for the dress length.



Take a yard stick or long plastic ruler and line it up against one of the peplum side seams. Mark this length. For this demo, I have the dress 18" longer than the peplum piece. (If you see the photo above, the 18" mark is right at the bottom edge of the peplum. 



Move the ruler a few inches, keeping the ruler and bottom edge of pattern piece together at the 18" mark. Make another mark. Do this the whole way across the peplum till you have a complete skirt.




If you feel like the skirt is too big, you can make it smaller! You can adjust it when you try it on, or before cutting out. If you do it before cutting out, line up your ruler at the peplum waist. Then move the ruler till you feel like you're at a good width. The key is to make sure you keep the sizing at the waist so you don't have fit issues later!


Repeat the same step for the back peplum piece. Follow the same steps for the rest of the garment. How easy was that?

Here is my finished Pretty Peplum Dress. It's been so cold outside to get good pictures, so this will have to do for now! I like the overall look, but in certain photos the waistline does not look flattering to me. I think this may have something to do with the fact that I did not cut out the darted front top piece. Read about that HERE. I plan on taking the front piece out and re-cutting the front with the darted piece.


Tomorrow, I will share with you my finished peplum tops with some commentary about what I did on each. I'd love to see how your peplum tops are coming along! Please share photos with me and I'll share them on the blog! (Finished top photos will be due at a later time to be considered for the sew along prizes!) 

ALSO! One of our followers, Angela, submitted photos of her muslin --so far so good! Can't wait to see it finished! 




Comments

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Basics vs Fun Clothes

Every summer I make flowy, pretty dresses because they are so fun for me to make, wear, and they keep me cool as temperatures rise. But when the days get shorter and autumn rolls around, I’m not always confident on how best to transition my summery dresses into garments that will allow for the seasonal changes. In an effort to be more intentional about maximizing the use of my clothing, I thought long and hard about what I wanted to make for August. It’s been a hot summer in New Jersey. From what I can see, it’s been a hot summer across the US. Looking for clothing that will keep me cool, perhaps hide some sweat stains, and allow me to transition between seasons, I decided to make separates that would pair well with each other and allow me to mix and match with the rest of my wardrobe. For the top, I wanted a basic tank top, something I could layer later on. For the bottoms, I wanted flowy, summery pants that can last into brisker weather or become phenomenally cozy in front of my wint...

Made By A Fabricista: From Paris with Love!

Bonjour! I am still in bliss from my recent trip to Paris!!  It was much more than I expected and I absolutely fell in love with the city. I can honestly see myself living there one day. I knew before leaving I wanted to make something to fit into the Parisian landscape because I knew it would be a special opportunity. I was inspired by one of my favorite fashion creators Juliette Foxx. Her checked gingham corset and wide leg pants were on my list to remake. For fabric I used this red and white pin stripe denim twill and deep red sateen for the pants.  The pattern I used for the corset was McCall’s #M8182 with a few modifications.  The fit was a little large so I took it in along the sides and shoulder seam.  I then lowered the neckline since the shoulders were taken in. I used the sateen as my lining which gave a great contrast.  My pants are my unreleased pattern which happens to be exact from the inspiration.  I drafted these last year and have been wo...

Made By A Fabricista: Sewing Summery ITY

Hi sewing friends! I’m dropping in to share a few makes sewn with ITY fabrics and inspire you to try out this slinky, cool-to-the-touch fabric for hot weather if you haven’t yet, or to recommend some patterns that work fabulously if you already love it. This is by far my favorite knit to wear in summer. Since it moves easily there’s lots of airflow, and it just skims the body. More often than not, it has a four-way stretch that doesn’t grow when worn, so it works great for loads of styles.  ITY stands for Interlock Twist Yarn and the knit gives it some wonderful drape and stretch. There are lots of different weights and even some differing textures. Because it’s so fluid, the fabric really resists most wrinkling. I’ve sewn three different weights and prints here to show off just what ITY can do!  This white floral is a lighter weight and features a slightly crepe-textured finish, and I think that combined with the large and spread-out floral makes it quite elegant and eye-cat...