Skip to main content

Made by a Fabricista: Wool/bamboo jersey knit cardigan

Helen's Closet Blackwood cardigan in wool/bamboo jersey knit

Hi everybody, it's Virginie from Jazz Couture and I'm excited to be part of the great Fabricistas team!

Here in eastern Canada, so far spring has brought us a cocktail of cold, wind and rain and it's not time yet for skirts and dresses. What I need now is transitional pieces, so for my first make as a Fabricista I opted for a cardigan and tried Helen's Closet Blackwood cardigan. Many sewists have made it since its release in spring 2017, and they definitely wetted my appetite for this pattern as there are many lovely versions of it on the internet!

Fabric:

The fabric I selected for this cardi is a wonderful wool/bamboo/lycra jersey, it's a lightweight, fine gauge knit that was just perfect for what I had in mind, i.e. a layering spring piece that is not too heavy but provides a little extra warmth on chilly days (and boy did we have a lot of those lately!).

The colour is called 'Stormy Seas' and it's still available here! It's a kind of gray with sage green undertones, a soft, flattering colour that goes with just about anything! Fabric Mart also has black and some grays available. That jersey knit is very refined and drapes beautifully. It's also very comfortable and not scratchy at all.


The colour of this wool jersey is called 'Stormy Seas'


Sizing and modifications:

This was my first time using a Helen's Closet pattern, and I selected a size small based on my measurements.  The fit is slim and it's just what I expected/wanted.

I elongated the bottom by 1 6/8''; it's not much but I think it makes the difference. As is, the proportions would have been sort of in between for my silhouette. I didn't use the cuffs for this version and instead turned a 1'' hem and finished the sleeve on the coverstitch. The sleeves are still plenty long and go beyond my wrist. I might use the cuff another time for a wintery version.


I turned a 1'' hem on the sleeve and finished it on the coverstitch


I rectified the shoulder seam as the angle was a bit weird (too forward next to the neck, and too backward at the shoulder tip).

I didn't do the pocket in two pieces as per the pattern and drafted my own pocket piece. Since I own a coverstitch, I turned a 1 1/2'' hem and finished it on the coverstitch for a RTW look.

Tip:

Which brings me to a tip I want to share with you. Patch pockets can be tricky with jersey knit material, as if you don't do anything the seams will often (if not always) come out wavy.

That tip is something I've come up with after some experiments to solve the wavy seams problem, and you might want to try it. Personally I don't fear patch pockets anymore in jersey knits, even with the most lightweight ones!

What I do is I make strips of featherweight interfacing, roughly the size of the seam allowances of the pocket (in this case 1 cm - 3/8''). I position them on the inside of the pocket and make sure to cover the seam allowance plus a little bit more.



Then I simply press the seams and topstitch on the sewing machine, preferably with a short stitch and fine matching thread if the fabric is lightweight. In this case what I had on hand is just regular serging thread, but still the result is perfectly fine. Look, no wavy seams!

A patch pocket on the Blackwood cardigan

I would also recommend that you make a test of a seam going across the grainline on fabric scraps and play with the differential feed on your serger, prior to assemble the bottom band to the bodice of the cardi. Often the fabric reacts differently when you sew it across the grain (than on the grain). I slightly decreased the differential feed on my serger to sew that seam and got a pretty even horizontal seam. Also, don't stretch the fabric when you feed it thru the serger!


Back view of the Blackwood cardigan


I think the wind made the two layers of the bottom band shift - usually I don't see those ripples!

I love my Blackwood cardigan; it's a casual layering piece and I know I'll be wearing it a lot this spring! The combination of wool and bamboo makes this jersey knit very soft and a pleasure to sew and wear.

I'll be seeing you again for another post in June - hopefully with a summery make! :-) Bye for now, and let me know if my little tip was useful to you!


Virginie

Comments

  1. Great tip re knit pockets! Thank you! I was just curious about why you wouldn't interface the whole pocket? Is it because it would make it too heavy? I often use a fusible knit tape by pellon to tape all the seams if the fabric is very drapey (like bamboo can be!) but especially across the shoulder seams. Love your blackwood and that fabric from FabricMart is beautiful!

    ReplyDelete
  2. Kathleen, I don't think interfacing the whole pocket would make it too heavy, but it would certainly stiffen it and I prefer the look of a soft pocket. Interfacing only the seam allowance does the job, plus the interfacing doesn't show on the outside. Yes, that fabric is gorgeous and I highly recommend it!

    ReplyDelete
  3. Love your cardigan. Thanks for your tips also.

    ReplyDelete
  4. A very well made cardy!
    Lee.

    ReplyDelete
  5. This is really beautiful and so well made. That sweater could be in an upscale boutique. I'm envious!!

    ReplyDelete
  6. Thank you Nancy! You could easily replicate it: Blackwood cardigan pattern + Stormy Seas wool/bamboo knit = your own cardi! :-) ...and it's an easy pattern to sew.

    ReplyDelete
  7. What a beautiful pocket and such an elegant cardigan!

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: From My Imagination to My Closet

One of my favorite parts of sewing is taking an idea that exists only in my head and turning it into something I can actually wear. This project was exactly that—a quick, intuitive exercise in imagination, experimentation, and trusting my process, brought to life with Fabric Mart’s sweatshirt fleece. I started with a loose concept rather than a fixed plan. I knew I wanted something comfortable, but still fashion-forward—elevated loungewear that felt intentional rather than basic. Fabric choice was key, and Fabric Mart’s sweatshirt fleece ended up being the perfect foundation. Working with Fabric Mart Sweatshirt Fleece This fleece was an absolute dream to work with. It has a slight stretch, which made the final outfit incredibly comfortable while still maintaining structure. After pre-washing, the fabric held up beautifully with no pilling or texture issues, which is always a big win. It sewed smoothly and handled like a fabric that wants to be worn, not babied. Safe to say, I’m offici...

Help Our Buyers Shop!

  Comment on this post with what you are looking for right now and our buyers will seek it out!  I am craving wool gabardines and ponte knits in fun autumn colors. What about you?

Made By A Fabricista: Three Methods to Explore Colorblocking

Hey sewing friends! As I pondered what sort of plan to tackle for my next wintry project, a new and glorious array of rainbow Polartec fabrics filled the Fabric Mart site. I’ve enjoyed sewing with this brand’s fabrics for many years now, and I’m all too happy to add some more to my wardrobe.  I picked two of my favorite types, the Power Air Grid Double Knit and the Power Grid Fleece.  Choosing a few colors in matching weights to combine them into something totally me sounded perfect. Look at this stunning heap!  When I’m sewing two different fabrics together, I prefer to use the same weight and type so that they behave similarly and hang well together. Any extra piecing like this also creates topstitching opportunities galore! (You already know I’m all about that available thread matching.) In this case, I opted for three colors in each of the two fabric varieties I mentioned above for the best combining results.  I figured I’d dive in with a brief overview of how y...