Skip to main content

Made by a Fabricista: Pamela's Patterns Favorite Bias Skirt

With summer finally here, I wanted to update my skirt wardrobe. I have been wanting to make Pamela's Patterns Favorite Bias Skirt for a long time and I finally did it! I was inspired to make this by Pamela herself because she was wearing this skirt made from linen during a visit. I have to admit I'm not keen on linen because of it's wrinkle factor, but thought this was my opportunity to give it a try! 



I chose a printed linen that was in Julie's Picks a few months back. Anyone else have this fabric?! I love the design. And when you put it on the bias it looks even crazier! 



If you have the same fear of linen that I do, you may want to consider a linen blend fabric. Linen can be blended with many different contents, but one I see more often than not is linen/cotton or linen/rayon blends. Bunch up the fabric in your hand. Does it create a lot of wrinkles that do not seem to come out very quickly? Or do the wrinkle go away somewhat gracefully? If the wrinkles do not go away, you most likely have 100% linen. If they come out in some way, then it is a blend. 

The pattern also calls for lightweight wools, silks, rayon challis, lightweight denim and more. The skirt can also be lined. There are directions included with the pattern to show you how to create a lined skirt with the elastic method Pamela uses. 

The pattern can be made in two lengths -- long and short. It also can be made in a full or slim silhouette. I chose the slim silhouette. There was not much to this pattern. It is super easy and is a great pattern for instant gratification! There is only one piece to this pattern and you use it for both the front and back. You need to tape together the two pieces to create the bias skirt. 



I've worked with bias cuts before, but Pamela had a good idea when pinning two pieces together. With right sides of the skirt together, pin the top and bottom of the skirt along the side seams. Then pin into the center. This way will allow you to stretch the fabric evenly so you don't have excess at the bottom of your skirt. 

Here you can see how the ends do not match up, before pinning. 

Here is the pinned side seams, all lined up!

I really liked how the elastic was attached. This seems to be a RTW technique, quick and easy. Once you have the side seams stitched, you will need to try the skirt on. Here I am in this lovely picture (cough cough!) I had my skirt sit just above the hips. Seems to fit good enough for me. (But now that it is finished, I wish I would have made it just a little bit smaller.) Make sure your length is even too. Mine was and I didn't have to do any alterations. Refer to the pattern for more information on fitting the skirt. 

**Pamela uses her Fantastic Elastic. I did not have any, but assumed I needed a soft elastic, not a really stiff one. I had a soft knit elastic in my stash and cut the width to size. I made it 1-inch, it was originally 1 1/4". If you're not using Fantastic Elastic, test your elastic to see if the width can be trimmed. It will fray if it cannot be trimmed. You can purchase Fantastic Elastic on her website



Once you have the fit correct, stitch the elastic together at the ends. Then find four points on your skirt and the elastic. A front, back and two sides. Line up all these points to the same points on the skirt. 



I used a serger to attach the elastic to the skirt. You can use a regular sewing machine to do this as well. Start stitching at one of your pins, stretching the elastic as you go. Stitch the entire way around the skirt. 



Turn the elastic to the wrong side and stitch the waistline. The fabric will stretch because of the bias, so I recommend pinning it before stitching. Press with an iron to flatten out the waistline. 


That's it! As I mentioned before, this skirt is really easy and you will have it done in no more than an afternoon. 


This skirt can be casual or fancy depending on the fabric you select. Mine is casual. Great to wear with a tank or solid top. I can see myself wearing this to an arts festival in my future...!


I would definitely recommend this pattern from Pamela's Patterns. I'm ready to try another one of her patterns! Click here to see all of the Pamela's Patterns we carry. 

Which is your favorite Pamela's Pattern?

Happy sewing! ~ Julie



Comments

  1. Cute!. That fabric intrigued me but I'm not a purple person so passed it by. I love seeing it in a garment though. Thanx for sharing!

    ReplyDelete
  2. Yes, I am afraid of linen. Mostly its due to the fact that I need to iron it. Your skirt looks fantastic and I am encouraged to try it out. Great job.

    ReplyDelete
  3. I love bias cut garments. Reading your post today taught me a few tips on construction. Thanks.

    ReplyDelete
  4. I too love bias cut garments....and I have always loved sewing with linen. It is washable, it has give-and-take, it is comfortable in summer, it has just enough body, and as it is said, "You can tell it's real linen because it wrinkles!"

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: From My Imagination to My Closet

One of my favorite parts of sewing is taking an idea that exists only in my head and turning it into something I can actually wear. This project was exactly that—a quick, intuitive exercise in imagination, experimentation, and trusting my process, brought to life with Fabric Mart’s sweatshirt fleece. I started with a loose concept rather than a fixed plan. I knew I wanted something comfortable, but still fashion-forward—elevated loungewear that felt intentional rather than basic. Fabric choice was key, and Fabric Mart’s sweatshirt fleece ended up being the perfect foundation. Working with Fabric Mart Sweatshirt Fleece This fleece was an absolute dream to work with. It has a slight stretch, which made the final outfit incredibly comfortable while still maintaining structure. After pre-washing, the fabric held up beautifully with no pilling or texture issues, which is always a big win. It sewed smoothly and handled like a fabric that wants to be worn, not babied. Safe to say, I’m offici...

Help Our Buyers Shop!

  Comment on this post with what you are looking for right now and our buyers will seek it out!  I am craving wool gabardines and ponte knits in fun autumn colors. What about you?

Made By A Fabricista: Three Methods to Explore Colorblocking

Hey sewing friends! As I pondered what sort of plan to tackle for my next wintry project, a new and glorious array of rainbow Polartec fabrics filled the Fabric Mart site. I’ve enjoyed sewing with this brand’s fabrics for many years now, and I’m all too happy to add some more to my wardrobe.  I picked two of my favorite types, the Power Air Grid Double Knit and the Power Grid Fleece.  Choosing a few colors in matching weights to combine them into something totally me sounded perfect. Look at this stunning heap!  When I’m sewing two different fabrics together, I prefer to use the same weight and type so that they behave similarly and hang well together. Any extra piecing like this also creates topstitching opportunities galore! (You already know I’m all about that available thread matching.) In this case, I opted for three colors in each of the two fabric varieties I mentioned above for the best combining results.  I figured I’d dive in with a brief overview of how y...