Skip to main content

Made by a Fabricista: Pamela's Patterns Favorite Bias Skirt

With summer finally here, I wanted to update my skirt wardrobe. I have been wanting to make Pamela's Patterns Favorite Bias Skirt for a long time and I finally did it! I was inspired to make this by Pamela herself because she was wearing this skirt made from linen during a visit. I have to admit I'm not keen on linen because of it's wrinkle factor, but thought this was my opportunity to give it a try! 



I chose a printed linen that was in Julie's Picks a few months back. Anyone else have this fabric?! I love the design. And when you put it on the bias it looks even crazier! 



If you have the same fear of linen that I do, you may want to consider a linen blend fabric. Linen can be blended with many different contents, but one I see more often than not is linen/cotton or linen/rayon blends. Bunch up the fabric in your hand. Does it create a lot of wrinkles that do not seem to come out very quickly? Or do the wrinkle go away somewhat gracefully? If the wrinkles do not go away, you most likely have 100% linen. If they come out in some way, then it is a blend. 

The pattern also calls for lightweight wools, silks, rayon challis, lightweight denim and more. The skirt can also be lined. There are directions included with the pattern to show you how to create a lined skirt with the elastic method Pamela uses. 

The pattern can be made in two lengths -- long and short. It also can be made in a full or slim silhouette. I chose the slim silhouette. There was not much to this pattern. It is super easy and is a great pattern for instant gratification! There is only one piece to this pattern and you use it for both the front and back. You need to tape together the two pieces to create the bias skirt. 



I've worked with bias cuts before, but Pamela had a good idea when pinning two pieces together. With right sides of the skirt together, pin the top and bottom of the skirt along the side seams. Then pin into the center. This way will allow you to stretch the fabric evenly so you don't have excess at the bottom of your skirt. 

Here you can see how the ends do not match up, before pinning. 

Here is the pinned side seams, all lined up!

I really liked how the elastic was attached. This seems to be a RTW technique, quick and easy. Once you have the side seams stitched, you will need to try the skirt on. Here I am in this lovely picture (cough cough!) I had my skirt sit just above the hips. Seems to fit good enough for me. (But now that it is finished, I wish I would have made it just a little bit smaller.) Make sure your length is even too. Mine was and I didn't have to do any alterations. Refer to the pattern for more information on fitting the skirt. 

**Pamela uses her Fantastic Elastic. I did not have any, but assumed I needed a soft elastic, not a really stiff one. I had a soft knit elastic in my stash and cut the width to size. I made it 1-inch, it was originally 1 1/4". If you're not using Fantastic Elastic, test your elastic to see if the width can be trimmed. It will fray if it cannot be trimmed. You can purchase Fantastic Elastic on her website



Once you have the fit correct, stitch the elastic together at the ends. Then find four points on your skirt and the elastic. A front, back and two sides. Line up all these points to the same points on the skirt. 



I used a serger to attach the elastic to the skirt. You can use a regular sewing machine to do this as well. Start stitching at one of your pins, stretching the elastic as you go. Stitch the entire way around the skirt. 



Turn the elastic to the wrong side and stitch the waistline. The fabric will stretch because of the bias, so I recommend pinning it before stitching. Press with an iron to flatten out the waistline. 


That's it! As I mentioned before, this skirt is really easy and you will have it done in no more than an afternoon. 


This skirt can be casual or fancy depending on the fabric you select. Mine is casual. Great to wear with a tank or solid top. I can see myself wearing this to an arts festival in my future...!


I would definitely recommend this pattern from Pamela's Patterns. I'm ready to try another one of her patterns! Click here to see all of the Pamela's Patterns we carry. 

Which is your favorite Pamela's Pattern?

Happy sewing! ~ Julie



Comments

  1. Cute!. That fabric intrigued me but I'm not a purple person so passed it by. I love seeing it in a garment though. Thanx for sharing!

    ReplyDelete
  2. Yes, I am afraid of linen. Mostly its due to the fact that I need to iron it. Your skirt looks fantastic and I am encouraged to try it out. Great job.

    ReplyDelete
  3. I love bias cut garments. Reading your post today taught me a few tips on construction. Thanks.

    ReplyDelete
  4. I too love bias cut garments....and I have always loved sewing with linen. It is washable, it has give-and-take, it is comfortable in summer, it has just enough body, and as it is said, "You can tell it's real linen because it wrinkles!"

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Falling for Knits

We are now well into Fall, even though the temps are still relatively warm here in Texas.  I love the fall season and dressing for Fall.   When it comes to the conversation of knits vs. wovens I typically sew mostly wovens. So for this post I decided to sew completely knits!  With the holiday season right around the corner I saw these three dress styles as perfect for Friendsgiving/Thanksgiving gatherings.  The first look is a tried and true pattern Simplicity S9372.  Using this gorgeous burgundy ponte knit , I like how this pattern fits throughout. I chose this color to add to my typically neutral palette in my closet.  I also wanted something I could wear to my sorority meetings and found this color perfect.  It's an easy sew with back fisheye darts  and invisible zipper to add to the tapered style.  The neckline and armholes are finished with bias binding giving it a clean finish on the inside.  I used a universal needle to sew a...

Made By A Fabricista: Closing 2025 with a Lined Jacket

Hello again, sewing friends! It seems we have arrived yet again in the grandest season for layering, all this oncoming cold weather. I like ending the year with something warm and very useful. Seems based on my past Fabricista posts, I love to sew year-end outerwear, and this round is no different!  I challenged myself with a new lined coat (wait, jacket? Coat? I feel like the presence of wool changes things?). Anyhoo, since the lovely Chalk & Notch Den Jacket has been in my queue, I proceeded ahead. I like the large pockets, the option to line or not, and the extra bodice and sleeve seams for topstitching.  Sewing this coat is not at all difficult, but the many pieces and loads of topstitching will take a bit of time. My version took me a few multiple-hour sessions to complete. I sewed a size 2, which matches my measurements, and I made no alterations. Hint: for a quick size test, just employ the lining pieces.  Gorgeous, muted blue as a soft wool flannel ? This is ...

Made By A Fabricista: Chalk and Notch Wren Dress: My Buffet dress for the Christmas season!

  I recently sewed the Chalk and Notch Wren dress using a beautifully soft black voile from Fabric Mart, and it turned into such a satisfying, enjoyable project. The pattern itself is very easy to understand and straightforward with clear instructions, intuitive construction, and a relaxed fit that makes the sewing process easy. A buffet dress in the sewing community is a dress that is loose fitting, so you can eat at the buffet without your dress being uncomfortable afterwards, lol! Because the voile I chose is extremely thin and transparent, I opted to line the bodice and first tier. Adding a lining not only provided modesty but also gave the delicate fabric a bit more stability, especially around the neckline and button placket. A helpful tip when sewing a lining into a lightweight bodice is to treat the lining and the main fabric as one. I sewed the bodice as you would for a lined bodice, and the first tier I sewed the pieces together with a basting stitch to make the process...