Skip to main content

Made By A Fabricista: Loungewear for Rainy Weekends

Hello fellow fabricistas!

Whereas California has been getting drenched by El Niño, and the East Coast is finally done digging out from winter storm Jonas, here in the Pacific Northwest, we've simply been dealing with a sightly chilly, very, very rainy winter for the past few months. Like most of you, I'm sure, cool, wet weather makes me want to bundle up in warm and cozy clothing. After enduring many rainy weekends this winter, I decided to treat myself to a new lounge/ athleisure outfit for my Fabric Mart project this month.

HotPatterns Pretzel Sweatshirt + SBCC Pinot Pants

First up are a pair of SBCC Pinot Pants, a yoga-style pull-on pant drafted specifically for petite women. If you're not familiar with SBCC patterns, they're designed for women 5'3" and under and use separate draft blocks for misses' and plus sizes. The size range for the Pinot Pants goes from a 32" hip (81cm) up to a 56" (142 cm) hip measurement.
SBCC Pinot Pants
For my version, I used one of the many Ponte knits available from Fabric Mart. The exact ponte that I used appears to be now sold out, but it's black in color and is a rayon, nylon, and lycra blend. It's been a dream to wear and has been holding up quite well in the wash. 

Based on the SBCC size chart, I sewed this pair in a size 2X. I do feel like these run a little large, at least in the plus size block, in that I was expecting them to be a little more fitted through the hips and thighs. However, I certainly think that they look fine and will be getting a lot of use out of them--just not quite as fitted in some areas as I was expecting. What's great about these pants is that with me being only 5'2" tall, I didn't have to shorten the legs or the rise at all. (I did add 1" to the CB seam, which is a common alteration for me to provide more vertical coverage over my ample rear end.) The pant legs do have a slight flare to them, so if you're short like me, there's no worrying about shortening your pant legs in multiple places or trying to figure out where the flare starts to preserve its look or anything.


SBCC Pinot Pants

I also used the free patch pocket add-on that Betsy released for these pants. You can download the pocket add-on from SBCC:


SBCC Pinot Pant Pocket Add-on


The pockets do not gape at all while being worn and are large enough to easily and securely hold my phone.


I'm quite happy with how these pants turned out, and I can definitely see using this pattern in the future as a TNT pattern whenever I want to whip up a pair of athleisure pants.


New athleisure outfit - Back view
My second piece this month is the relatively new HotPatterns Athleisure Pretzel Sweatshirt. The HP Pretzel sweatshirt is a relaxed-fitting sweatshirt designed for medium-weight drapey knits. 
 
HotPatterns Pretzel Sweatshirt


For my take on this pattern, I used this cobalt blue Ponte knit, which still has some yardage available. I think that ponte was a great choice for this pattern; it's hefty enough to make the sweatshirt feel cozy, but has enough drape to really show off the twist detail at the hem.

Per the size chart and my previous experience with HotPatterns, I sewed a size 18 through the neck and shoulders, grading out to a size to through the bust, waist, and hips. The final sweatshirt fits as expected.

HP Pretzel sweatshirt

You know how some projects are just fun to sew? They go together quickly without any real tricky bits or drama, but have some sort of design detail that elevates them above being completely basic? This is one of those projects. I was able to construct the entire top on my serger/coverstitch combo machine, and I was able to complete the sweatshirt in about 2.5 hours (including fabric cutting time).

The twist detail at the hem is fun and elevates this sweatshirt over your basic sweatshirt pattern. The pattern also includes suggestions for contrast top-stitching (which I omitted).

Overall, I love my new outfit! It's both comfortable and practical for the mom-on-the-go role that I take on over weekends, and it's also warm and cozy for lounging around the house on a rainy day with the fireplace on.


~ Michelle from Happily Caffeinated 

Comments

  1. Very cute. Those pants are really nice and I swoon over the top. I've been waiting for fhat one :)

    Excellent job! You're definitely doing cute and casual right!

    ReplyDelete
  2. I like the sweatshirt. That twist at the hem is much more flattering than a band, isn't it? Great use of color. You look cute, warm, and happy.

    ReplyDelete
  3. Love the shape of that sweatshirt! Thanks for posting about Hot Patterns (I discovered them through your blog). I have had a lot of fun with the different construction techniques I've learned from HP patterns.

    ReplyDelete
  4. I love your outfit! You look fun and happy and stylish.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Week 4: Jeansmaking- What They Made

This is it, the final round! And we certainly did not go easy on our three remaining contestants this time. This round they had to make their own pair of well fitting jeans. I think they all did an absolutely outstanding job! Take a look what these ladies accomplished & be sure to vote for your favorite! (Link at bottom of post.) And, don't forget to show us your me-made jeans on Facebook or Instagram. Details at the bottom of this post. Danesha from  Classyfied Life So first I must say that this entire challenge has been just that...a challenge! Two weeks ago there was hurricane Irma and I was blessed enough to not lose power and then I went out into the aftermath to capture some photos of my submission. Then two weeks ago I had a big trip planned so I had to do EVERYTHING  in two days . Then the BIGGEST challenge of all...THIS week! I got the challenge and I was super excited to have an extra few days and then before I could even get started I ended up in the eme

Made By A Fabricista: A great tee shirt pattern – or three!

Hi fellow sewists! It’s Andrea  @happy.things.here and I’m here today to talk tee shirts!  I love a good tee pattern…or two…or four. Despite having more than enough of them in my pattern collection, I’m always up for trying a new one. And I also have my favorites and tried and trues (TNTs). I love the versatility of a good tee pattern – dress it up with fancy fabrics to make a work wardrobe piece, use a high quality solid to add some basics, or anything in between. Today I’m sharing three patterns I’ve used multiple times and with many different kinds of fabrics - all a little different and all great beginner patterns too. First up is the newest addition to my pattern collection – the Upland tee and crop top by Rivet Patterns. They are a newer designer who I recently discovered when this tee pattern caught my eye. I love that it has multiple bodice options including a classic design tee and also a crop version with different separate and uniquely shaped bodice pieces. I first made the

Made By A Fabricista: Dreamy Florals | A DIY Dress Inspired by Son de Flor's Spring Collection

Hi everyone!  When I saw this floral print linen/cotton blend make it’s way onto the to-be-described table I knew I had to make a dress from it.  I’d been staring dreamily at all the dresses from the brand Son de Flor who had just put out their spring collection and thought, maybe I can throw together something inspired by them!  I grabbed three yards of that floral shirting and a yard of SWC5682w to line the bodice with.  I used Simplicity’s S8946 for its simple bodice block.  This pattern has a gathered rectangle for the skirt, but I’m a sucker for a circle skirt so that’s where I decided to start.  I folded the fabric twice and cut out the longest circle the fabric would allow.  Then got to work on the bodice, sewing up the darts and attaching everything. Now, I don’t love installing zippers.  I ha d a lot of trouble getting them to sit right, and no matter how much mental gymnastics I do when first pinning one side is always put in the wrong way.  So while I did have to unpick and