Skip to main content

Made by a Fabricista: A Mesh Knit Top for Fall

I have had a fear of sewing with mesh for years...literally!  I finally overcame it and tried a few projects and decided it's fun...just take a few precautions and you'll be fine.  

                   

Trust me!

                      
My original project I had planned was a total wadder which was too bad!  I really liked the fabric but despite making a muslin, it fit so weirdly and was very, very unflattering.  I can't even show it to you!  



Luckily I hadn't taken the time to blog about this top I am wearing--whew!  



Can you see how cool this fabric is?  It's comfortable on your skin too!  



This top is made in a 'cocoon' shape which is sort of funky but I like it!   However, you must choose the right fabric.  This is a StyleArc pattern and here is a picture from the site: 


The cocoon shape is more pronounced that it appears in the line drawing.  The sleeves are VERY narrow, so test the fit prior to sewing together.   


 Mesh is a great choice since it doesn't stand away from your body making you look like an egg, which is important! 



I tested this fabric using both a regular sewing machine and a serger.  It worked just perfect on my serger so that is how I stitched the entire thing.  



I topstitched the neck band on and then single-stitched the hems.  


\
What do you think of sewing with mesh?  If you are worried, don't be, just create some test strips and find out what works for your fabric and design.  

                   

Thanks for reading!
Sue from Ilove2sew!

Comments

  1. Very neat! I love that fabric. I too am a little hesitant to work with mesh. It's good to see your top looking so great in it!

    ReplyDelete
  2. Really like how the mesh works with this pattern. Nice top.

    ReplyDelete
  3. That's a great top, it looks very comfy and you look great in it. Love your hair!

    ReplyDelete
  4. I am a convert to mesh knit. I got an interesting piece in a FM mystery bundle. It was a camouflage print in orange, green aqua...kinda loud, but I made a Hawthorne T out of it and LOVE it! You're so right about picking the right pattern for this fabric. The Hawthorne works great, except I tried to hem the sleeves - big mistake. So I cut off the hem, and decided I needed to make the lower sleeves much smaller in circumference, because the mesh stretches pretty far and I wanted the sleeves to slay up when I push them up to the elbows. I used a knit lightening stitch and was pleasantly surprised my little economy Brother machine handled it well with no problems. I was able to double needle stitch the neckline too - the final product looks great and is very comfortable. Gotta love those bundles!

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Which comes first – the fabric or the pattern?

Ah, the age old question garment sewers are often asked – do you choose the pattern first and then look for fabric, or do you buy fabric and then later decide what it will be when it grows up? If you are a sewist with a large fabric stash (like myself), then perhaps you are on Team Fabric. I would say I definitely lean that way, but there are also times when I land somewhere in the middle – I see a fabric and I think, I’ve just seen a pattern and these two would be perfect together! And that’s how gorgeous dusty rose stretch velvet and a recently released cardigan pattern came together to create the newest addition to my wardrobe. And had me improvising a few things along the way. First. I have to admit - I have a stretch velvet problem. I see it pop up on the website and I almost always grab it, especially if I see a sale. It’s not the easiest fabric to sew (it’s slippery as heck!), but I love it so much and I especially love using it in non-traditional ways. In my last blog post, I...

Made By A Fabricista: Back In The Saddle

If you don’t know in October my beloved Bernina sewing machine blew a fuse and started smoking while I was using it. She went to the shop for repairs, and then I moved. So it’s been a bit since I’ve sewed last and I’ve had trouble getting back into it. I knew I needed a simpler project to get me going again. Julie sewed up a Jarrah sweater recently ( restock coming soon! ) and gushed about how simple and rewarding a project it was. Then we got in this beautiful wool/cashmere sweater knit from England. I was seeing lighthouse keeper, sheep herder in the highlands. I knew it had to be my Jarrah sweater. I did lengthen the bodice by 3 inches. I actually sewed up a mock up with the curved hemline, but decided that wasn’t for me and went with the straight hem. Of course I took zero photos of said mock up.  Oops. Otherwise I sewed it up in a size 6 as is. Using the serger this really does sew up quickly. The dropped shoulder creates clean, simple lines that make it easy to sew u...

Made By A Fabricista: A Wooly Wearable Blanket.

Twirling in a me-made outfit! I live in a small town where the nearest fabric shop is a road trip away, so I almost exclusively shop for fabric online. Having access to an online shop like Fabric Mart with a solid search engine is incredibly helpful. But by far my favorite aspect of Fabric Mart is what I call the “Drape Picture” included in each listing! This picture gives me all the information I need and I find it more helpful than the exact weight per yard/square meter.  Seeing how the fabric falls close or away from the body gives me a clear idea of how it will behave and inspires me to make it into something that will highlight the fabric’s nature.  When I saw the drape of this “Baked Plum” wool suiting , I immediately wanted to immortalize those beautiful folds into a skirt! I opted for a simple self-drafted pleated skirt with a deep hem. I wear my dresses year-round and rely on wool skirts that I layer under or over my dresses for warmth. I cut two panels for the front ...