Skip to main content

Made by a Fabricista: What to Make with Silk Taffeta



You may have noticed that Fabric Mart has a *HUGE* selection of silk taffeta right now.  A lot of it is either large plaid or large stripes.   I was curious about it, and not really sure what I could make with it, but I just knew it would be gorgeous fabric and had to play around with it.  Turns out, it's actually great for quite a range of projects!  The dress above is my third project.


Let me show you the first two. My first was to make some queen size pillow shams.  They are the plaid ones in the back of the photo.  I also made the two printed ones in the center from another Fabric Mart home dec fabric special! 


I wanted to make the covers removable with a zipper, and include a braided trim.  As luck would have it, I found a whole card of braided trim at an estate sale that worked with my taffeta for just $2!


To start, I used a zipper foot to stitch down the braided trim all around one side of the pillow. Then I serged a piece of lining fabric to the back of each side.  I don't think that you would have to line these, but I'm using down feather pillows, so I thought that the lining might be a barrier to feathers poking out.


For the corners, I trimmed the braided trim and wrapped tape around the ends so that they wouldn't ravel.  Then, I just pushed the edges together at a corner, so that after the pillow was turned, they would be on the inside, like this:


Then, I went back and sewed the zipper face down over the braided trim, as if it would be an invisible zipper.


This is what it looked like before I sewed them together.


And this is the zipper afterwards-you can just barely see it under the trim.


It's hard to capture the sheen on these pillows, but they are really quite beautiful and rich-looking in person! I used 2-1/4 yards of the silk, and I lined them with 2-1/4 yards of drapery lining.  I had about a 12" wide piece of silk left from cutting the pillows, so I decided to make a table runner for our foyer table from it.


On the back side, I used the drapery lining, and did a similar thing with the braided trim.  I think that the braided trim really is a simple way to make things look high end.


I finished it just in time for a bridal shower that we were hosting, and another great coincidence- the letters of their names were painted in the same shade of green!


And now back to the dress!  I wanted to make something to wear from the taffeta for the shower, but didn't want anyone to see the pillows and table runner, and be able to know that it was the same fabric.  So, I took a 2-1/2 yard piece of the taffeta, and dyed it with 2 Tbsp of navy blue fabric dye.  It absorbed the dye so fast, I couldn't believe how much it changed it!  It turned it into kind of a denimy blue with lavender accents.  Here is the before and after side by side:


The texture became a little limper, and slightly less shiny, but I definitely prefer it for less formal clothes.  It's been a million degrees here with unspeakable humidity, so I decided to make a  loose-fitting sleeveless dress that I could wear for the bridal shower.


I found a simple a-line dress pattern with center front and back seams, so that I could cut it on the bias and match the plaid design.


I had a one yard package of lavender beaded trim that I used to accent the pockets and neckline, and used a self bias strip turned to the outside to finish the neck.  Even though it's simple, this was a technically challenging project to get everything to line up just so!


I got a lot of compliments on it at the shower, and one very nice surprise, was that it didn't wrinkle much at all!  These photos were taken after a very long day, setting up and then hosting the shower, and then even a nap afterwards, and there are really no more creases than there were to begin with!  The crinkly texture was there all along.


Sewing with silk taffeta is really easy- it presses well and it doesn't slip around when cutting or sewing like some silks do.  Have you tried sewing with silk taffeta?  If yes, what did you make?


Happy Sewing!
Ann

Comments

  1. The pillows and runner are beautiful! A great addition to your home! And your dress is perfect! Is it NL 6430? If so, I've just made 3 of them and love that pattern. So if course you couldn't go wrong using it with the silk taffeta...and now you've got me thinking that I need one more from a washed taffeta silk.

    ReplyDelete
    Replies
    1. Thanks, Carolyn! Yes, I think you need one more too! I used Kwik Sew 3049 for this one. It's long out of print, but a great one for a bias dress.

      Delete
  2. Beautiful! I love the home projects and the use of the trim - on all of the projects. The beaded trim just adds a little pop. Very nice. g

    ReplyDelete
    Replies
    1. Thanks,g! I agree, if you can find the right trim, it can really elevate a project.

      Delete
  3. Such a lovely combo ... FIESTA ;)

    ReplyDelete
  4. I definitely need to try my hand at those pillows and that table runner. Just beautiful. Thank you for sharing.

    ReplyDelete
  5. I love that dress! I especially like the way you matched the plaid to form the smaller squared down the center, it really sets off the larger squares of the fabric. I searched for this fabric from the moment I saw your dress, or something in the same size range in a very even plaid, but alas, I couldn't find anything.....until I looked in the sale section and bought the last piece! Yay! I'll make it without dying it although I love the color yours became. But I like the original color, too, and won't be competing with a table runner!

    ReplyDelete
    Replies
    1. Thanks, freemotion! Glad to hear that you got the last piece and hope your dress turns out great!

      Delete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Week 4: Jeansmaking- What They Made

This is it, the final round! And we certainly did not go easy on our three remaining contestants this time. This round they had to make their own pair of well fitting jeans. I think they all did an absolutely outstanding job! Take a look what these ladies accomplished & be sure to vote for your favorite! (Link at bottom of post.) And, don't forget to show us your me-made jeans on Facebook or Instagram. Details at the bottom of this post. Danesha from  Classyfied Life So first I must say that this entire challenge has been just that...a challenge! Two weeks ago there was hurricane Irma and I was blessed enough to not lose power and then I went out into the aftermath to capture some photos of my submission. Then two weeks ago I had a big trip planned so I had to do EVERYTHING  in two days . Then the BIGGEST challenge of all...THIS week! I got the challenge and I was super excited to have an extra few days and then before I could even get started I ended up in the eme

Made By A Fabricista: A great tee shirt pattern – or three!

Hi fellow sewists! It’s Andrea  @happy.things.here and I’m here today to talk tee shirts!  I love a good tee pattern…or two…or four. Despite having more than enough of them in my pattern collection, I’m always up for trying a new one. And I also have my favorites and tried and trues (TNTs). I love the versatility of a good tee pattern – dress it up with fancy fabrics to make a work wardrobe piece, use a high quality solid to add some basics, or anything in between. Today I’m sharing three patterns I’ve used multiple times and with many different kinds of fabrics - all a little different and all great beginner patterns too. First up is the newest addition to my pattern collection – the Upland tee and crop top by Rivet Patterns. They are a newer designer who I recently discovered when this tee pattern caught my eye. I love that it has multiple bodice options including a classic design tee and also a crop version with different separate and uniquely shaped bodice pieces. I first made the

Made By A Fabricista: Dreamy Florals | A DIY Dress Inspired by Son de Flor's Spring Collection

Hi everyone!  When I saw this floral print linen/cotton blend make it’s way onto the to-be-described table I knew I had to make a dress from it.  I’d been staring dreamily at all the dresses from the brand Son de Flor who had just put out their spring collection and thought, maybe I can throw together something inspired by them!  I grabbed three yards of that floral shirting and a yard of SWC5682w to line the bodice with.  I used Simplicity’s S8946 for its simple bodice block.  This pattern has a gathered rectangle for the skirt, but I’m a sucker for a circle skirt so that’s where I decided to start.  I folded the fabric twice and cut out the longest circle the fabric would allow.  Then got to work on the bodice, sewing up the darts and attaching everything. Now, I don’t love installing zippers.  I ha d a lot of trouble getting them to sit right, and no matter how much mental gymnastics I do when first pinning one side is always put in the wrong way.  So while I did have to unpick and