Skip to main content

Made by a Fabricista: Working Out My Sewing Muscles


One thing that I know for sure is that I'd rather be sewing than working out.  But sewing workout clothes is a pretty good way to motivate myself to to do more working out!  I joined a yoga class and a dance class this year, and used some of Fabric Mart's activewear to make several pieces that will be perfect for my classes.  I used this piece of nylon/lycra activewear as my focal point.   I only had 1-1/2 yards of it, but I used it in 3 of my pieces to tie everything together. 




For my jacket, I used Butterick 6386 for the pattern.  For the leggings, I used Simplicity 8212.  I only used the print to line the hood, and the majority of the jacket was made using navy and dusty blue solid activewear knits.  The solid dusty blue Dryflex knit came in a bundle, and I purchased the navy one last year- it was a Judy P activewear knit that was very high quality- Fabric Mart had a lot of it, and I hope that they can get some more from that brand!  There is a lot of variability in activewear knits, and I love that FabricMart finds a wide variety of knits so that I can experiment with them.  I sew all of them with a serger and then use a coverstitch for hems and neckbands. 



Both patterns worked well with minimal tweaking, and I would recommend both of them.  The jacket has some interesting lines, and I like the way the front pockets are worked in the curve of the front. Although I generally prefer things on the loose side, I discovered that you really do want your leggings to be snug.  Otherwise, they just look wrinkly which is not a good look!  There are quite a few legging patterns out there to choose from- some with pockets and different options for piecing.  I chose this one because it had both a simple version and a more complex version, two lengths, and two waistband heights.  I decided that I like the higher waistband, so it was nice to have the options.


One night when I was going to yoga class, it was a rainy night and in the parking lot, I almost ran over a woman because I couldn't see her!  This got me thinking about how I could make my own jacket more visible at night, and I added some iron-on reflective tape on the back, on the sleeve seam and at the front yoke.  I think that it really made the jacket a lot more interesting as well as making it safer to walk at night!


The cording is white cotton cording that I dyed blue and then wrapped scotch tape around the ends to keep it from fraying.  I've done this method before, and it lasts.


I forgot to add length to the sleeves and they came up too short for me. Luckily I had enough of the navy knit to make cuffs to make the sleeves the right length for me.

 The next piece that I made was a tank top using Butterick 6571.  I chose this because of the diamond shape insert that I thought would reflect the diamond shapes in the print.  I left off the sleeves, and just bound the entire armhole. 


The top part of the tank fit me well, but it was too snug in the midsection.  So, I added a triangle of the navy knit on the sideseams.    This was one of those "make it work" moments, but I think it actually improved the look, as it navy insert lines up well with the navy insert in the  capri length leggings.



For my second pair of leggings, I used a strip of the print in the front panel, and solid navy in the back panel, with the majority of the legging being made from the dusty blue knit.  These are View D of the legging pattern- the high rise capri.  I really like this legging pattern.  It's easy and fits just like a ready to wear legging would.


One thing that I find a little tricky with activewear knit is being able to tell the wrong side from the right side, as I believe that some of them are wicking and breathable, and if you reverse the sides, you might not get those wonderful benefits. So, I usually will stretch the knit and see which side the cut edge curls to, and I call that the right side.  Please correct me if I'm wrong on that!



If you've taken a yoga class, then you know that it's smart to bring something warm to wear both as you are warming up and cooling down, as the room might be chilly.  So, I made a loose fitting t-shirt out of a solid blue cotton/lycra knit using View A of Simplicity 1463.  I added 4 inches to the length of it, so that I could lift my arms and still have plenty of length.  Fabric Mart has some nice solid cotton/lycra knits in stock right now. 



So, altogether I made a jacket, 2 pairs of leggings- one full length and one capri length, 2 tops- one printed tank and one long sleeved solid t-shirt.  I should be set for a while!  I really loved making these pieces, and I know that I will love wearing them as well.


Have you tried sewing your own workout clothing? How has your experience been?

Happy Sewing!

Comments

  1. Love all of your projects Ann. Have been collecting some activewear from FM to make my own also. Nice job.

    ReplyDelete
  2. Great job on the new workout clothes!! I have DIY'd before but found the leggings pattern I used to run a tad too baggy through the leg. I'll try this pattern!!

    ReplyDelete
  3. Great job! Keep up the good work!

    ReplyDelete
  4. What a wonderful collection of activewear you've sewn ! I love sewing activewear too and found some great quality knit at FM. My favorite was one of Julie's picks and how I wish I had more of it !

    ReplyDelete
  5. Love your post. I have workout wear on my list to try to make this year. Hopefully get to it sooner than later!

    ReplyDelete
  6. Great looking projects, I really love that jacket.

    ReplyDelete
  7. Such a great set Ann! The reflective tape is such a smart idea. We have night runners in my neighborhood, and I'm always grateful for the ones with reflective tape and lights, and I worry about the rest! These knits go so well together--the contrast on the back of the leggings is particularly sharp! Happy working out!

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Week 4: Jeansmaking- What They Made

This is it, the final round! And we certainly did not go easy on our three remaining contestants this time. This round they had to make their own pair of well fitting jeans. I think they all did an absolutely outstanding job! Take a look what these ladies accomplished & be sure to vote for your favorite! (Link at bottom of post.) And, don't forget to show us your me-made jeans on Facebook or Instagram. Details at the bottom of this post. Danesha from  Classyfied Life So first I must say that this entire challenge has been just that...a challenge! Two weeks ago there was hurricane Irma and I was blessed enough to not lose power and then I went out into the aftermath to capture some photos of my submission. Then two weeks ago I had a big trip planned so I had to do EVERYTHING  in two days . Then the BIGGEST challenge of all...THIS week! I got the challenge and I was super excited to have an extra few days and then before I could even get started I ended up in the eme

Made By A Fabricista: A great tee shirt pattern – or three!

Hi fellow sewists! It’s Andrea  @happy.things.here and I’m here today to talk tee shirts!  I love a good tee pattern…or two…or four. Despite having more than enough of them in my pattern collection, I’m always up for trying a new one. And I also have my favorites and tried and trues (TNTs). I love the versatility of a good tee pattern – dress it up with fancy fabrics to make a work wardrobe piece, use a high quality solid to add some basics, or anything in between. Today I’m sharing three patterns I’ve used multiple times and with many different kinds of fabrics - all a little different and all great beginner patterns too. First up is the newest addition to my pattern collection – the Upland tee and crop top by Rivet Patterns. They are a newer designer who I recently discovered when this tee pattern caught my eye. I love that it has multiple bodice options including a classic design tee and also a crop version with different separate and uniquely shaped bodice pieces. I first made the

Made By A Fabricista: Dreamy Florals | A DIY Dress Inspired by Son de Flor's Spring Collection

Hi everyone!  When I saw this floral print linen/cotton blend make it’s way onto the to-be-described table I knew I had to make a dress from it.  I’d been staring dreamily at all the dresses from the brand Son de Flor who had just put out their spring collection and thought, maybe I can throw together something inspired by them!  I grabbed three yards of that floral shirting and a yard of SWC5682w to line the bodice with.  I used Simplicity’s S8946 for its simple bodice block.  This pattern has a gathered rectangle for the skirt, but I’m a sucker for a circle skirt so that’s where I decided to start.  I folded the fabric twice and cut out the longest circle the fabric would allow.  Then got to work on the bodice, sewing up the darts and attaching everything. Now, I don’t love installing zippers.  I ha d a lot of trouble getting them to sit right, and no matter how much mental gymnastics I do when first pinning one side is always put in the wrong way.  So while I did have to unpick and