Skip to main content

At Fabric Mart: The Guys

As you oooo and ahhh over all the beautiful fabrics on our website you might never think about how it got to this point online. It takes a lot of time and care to buy the fabric, prepare it for the site and post it online for all of our customers to see. You've met the buyers but now it is time to meet the warehouse staff who play a critical part in preparing our fabrics for the cutters to fulfill your orders. They unload the trucks, sort the fabric, sample it, measure it, roll it onto bolts and put it in its temporary resting place until it gets sent to a cozy spot in your house to be made into a gorgeous garment for your lifestyle.

Around Fabric Mart they are known as "The Guys."  There are not too many guys that work at Fabric Mart but they have a VERY important job that cannot be overlooked. So here are....The Guys!
Brett is our Inventory Control Manager. He assigns the fabric item numbers and locations and takes one bolt of each fabric to our description/photography studio. He also makes sure that the fabric inventory is correct. Plus he even helps unload trucks and sort fabric among other necessary tasks that help us run efficiently.
Ted is our bolter. His job is very important because he is the one who makes the fabric easier to handle. Ted uses a bolting machine to fold the fabric onto the bolt and cut a 50 yard roll down to smaller, more manageable pieces for the cutters. Ted also helps unload trucks to bring the fabric one step closer to your door step.
Jason pulls and processes wholesale orders. He also organizes and tags new fabrics. He also rolls fabric for the website that cannot be bolted and helps unload trucks full of fabric! When we are very overloaded, he also runs our second bolting machine.

We asked everyone at Fabric Mart the following questions. Here are "The Guys" responses:

How long have you worked here?
Brett: I started on January 2nd, 2012. (About seven months)
Jason: I started in April of 2012. (About three months)
Ted: One year

Describe a typical day at Fabric Mart:
Brett: It is very busy. I keep the inventory up-to-date and check on low yardage counts. Also help where needed.
Jason: Depends on which day you're talking about.
Ted: Bolt fabric, load/unload trucks, move fabric.

What do you do when you leave work? 
Brett:Yard work and other odd jobs, pick up my 3 year old twin girls from pre-school
Jason:Take care of his three kids, coach hockey, rebuild cars
Ted: Work on cars, do things around the house, make dinner, go out to eat, work out

How do you take your coffee? 
Brett: I don't drink coffee, I drink Gatorade.
Jason: French Vanilla and a lot of sugar.
Ted: Cream and sugar.

What is the best part of your job? 
Brett:When things work out the way they are suppose to.
Jason: Co-workers
Ted: Working in a laid-back atmosphere

If you were stranded on a deserted island, who from Fabric Mart would you take?
Brett: Sue, my boss.
Jason: I'd take everyone and turn it into a party! 
Ted:No one.

Comments

Popular Posts You Might Like

Week 4: Jeansmaking- What They Made

This is it, the final round! And we certainly did not go easy on our three remaining contestants this time. This round they had to make their own pair of well fitting jeans. I think they all did an absolutely outstanding job! Take a look what these ladies accomplished & be sure to vote for your favorite! (Link at bottom of post.) And, don't forget to show us your me-made jeans on Facebook or Instagram. Details at the bottom of this post. Danesha from  Classyfied Life So first I must say that this entire challenge has been just that...a challenge! Two weeks ago there was hurricane Irma and I was blessed enough to not lose power and then I went out into the aftermath to capture some photos of my submission. Then two weeks ago I had a big trip planned so I had to do EVERYTHING  in two days . Then the BIGGEST challenge of all...THIS week! I got the challenge and I was super excited to have an extra few days and then before I could even get started I ended up in the eme

Made By A Fabricista: A great tee shirt pattern – or three!

Hi fellow sewists! It’s Andrea  @happy.things.here and I’m here today to talk tee shirts!  I love a good tee pattern…or two…or four. Despite having more than enough of them in my pattern collection, I’m always up for trying a new one. And I also have my favorites and tried and trues (TNTs). I love the versatility of a good tee pattern – dress it up with fancy fabrics to make a work wardrobe piece, use a high quality solid to add some basics, or anything in between. Today I’m sharing three patterns I’ve used multiple times and with many different kinds of fabrics - all a little different and all great beginner patterns too. First up is the newest addition to my pattern collection – the Upland tee and crop top by Rivet Patterns. They are a newer designer who I recently discovered when this tee pattern caught my eye. I love that it has multiple bodice options including a classic design tee and also a crop version with different separate and uniquely shaped bodice pieces. I first made the

Made By A Fabricista: Dreamy Florals | A DIY Dress Inspired by Son de Flor's Spring Collection

Hi everyone!  When I saw this floral print linen/cotton blend make it’s way onto the to-be-described table I knew I had to make a dress from it.  I’d been staring dreamily at all the dresses from the brand Son de Flor who had just put out their spring collection and thought, maybe I can throw together something inspired by them!  I grabbed three yards of that floral shirting and a yard of SWC5682w to line the bodice with.  I used Simplicity’s S8946 for its simple bodice block.  This pattern has a gathered rectangle for the skirt, but I’m a sucker for a circle skirt so that’s where I decided to start.  I folded the fabric twice and cut out the longest circle the fabric would allow.  Then got to work on the bodice, sewing up the darts and attaching everything. Now, I don’t love installing zippers.  I ha d a lot of trouble getting them to sit right, and no matter how much mental gymnastics I do when first pinning one side is always put in the wrong way.  So while I did have to unpick and