Skip to main content

Getting Active with Kathy


I sew nearly all of my running gear.  Why?!  Several reasons: I want a better fit than I can get in ready-to-wear stuff. The nicer quality activewear I covet is much too expensive for my budget.  Plus I love crazy, loud running clothes-- for the fun of it and for high visibility & safety for the my urban running.  I'm not a fast runner by anyone's standards (but who cares!!) and have not been a super long distance runner but am starting to train for a half marathon in late spring! Making my own running clothes is a huge motivator for me... I sew a sassy new pair of leggings or top, then I just have go out for a run to try them out.


I sewed up three long-sleeved tops and a pair of tights. I used the newly released Surf to Summit Top pattern from Fehr Trade along with the Ooh La Leggings pattern from Papercut. I've sewn every single one of the Fehr Trade patterns (& have been a pattern tester for every single one but actually was not a tester for this particular ladies top) but I muslined it all out first. A few weeks ago Fabric Mart had a wildly amazing sale on a bunch of New Balance fabric found in their Activewear category so of course I ordered (almost) every color.  I used a bold pink from my order for my muslin and some purple and brown supplex bits I had in my stash for the mitts. I made a size small then graded to a large at the hip. I also added 1 1/2" to the length of the hem.  


I found the underarms to be cut pretty high for me and went ahead and cut out 3/4" to lower it some. I've run and hiked in this  pink version and the high underarm didn't cause discomfort, but I felt like there was just a small amount of excess fabric bunched up under there. You can see in the picture below how I removed that wedge from the pattern pieces.


My second version is in the shocking citron. I added in piping on the vertical seams in a dark pink. Both fabrics are that New Balance stuff. It's a polyester/lycra blend and is super stretchy with excellent recovery. I've run, hiked and washed all of these tops a couple times each already with zero shrinkage and no weird stretched out parts. It is a wicking fabric perfect for sweaty activities but I found it to not keep me really warm in below freezing temperatures. I've paired these tops with a fleece vest and it was perfect for the low 30s. In a side by side comparison to some knit Supplex fabric I have, they are basically identical. 


My third Surf to Summit top is a solid grey New Balance fabric I picked up from Fabric Mart when I was in their brick & mortar store in early fall.  I *wish* I bought more of it!!  It's heavier weight and has a very soft wicking back. 


And for the crazy tights.  I cut a medium waist and graded to an large below that.  The legs on the pattern are SUPER long, I hacked off 4" from the hem and I'm 5'8" without shoes!  I blogged about my first pair about a year ago on my blog her
e. The black & white print is nylon/lycra paisley peacock print actually from the swimwear category. It has no wicking properties what so ever, I'd steer clear of this sort of material in really sweaty, hot activity... but for running in colder temps at distances under say five miles, it's no problemo for me.  


I used more of the the dark pink New Balance fabric (the same color as the piping on the citron top) for the upper part of the tights and piping on the seams.  I've actually never done a piping like this before and just improvised a very simple technique.  I cut 1" wide strips long enough to cover the lengths of the seams. I then folded it half, pinned it to the edge of the seam and then joined my seams as usual with my pattern pieces.



I really like shaking things up on my hem finishes.  I sometimes will use a twin needle and other times do a nice looking zig zag stitch.  Both work really well, it's really a matter of what look I am wanting at the moment. I've seen a particular fancy-pants activewear clothing manufacturer use zig zag stitching on their hems and seams and liked the look (rhymes with LuluPhlemon.)


I use a serger for all my seams.  I prefer to use Maxi-Lock Stretch Thread for my activewear serging-- it's soft against the skin and has a "fuzzy" quality like a yarn.  I steer away from the regular cone thread for this sort of sewing, that stuff is great for my woven fabrics. 


Another interesting thing to note, the elastic to use in the waist of a pair of tights. I've tried both non-roll and  knit... I have a great affinity for the knit one-- it's very soft, more stretchy and moves much more comfortably than the stiffer non-roll elastic.


My husband was super sweet and took a couple photos of me in action.  I wore the pink one hiking last weekend... it was so nice to have the mitts when the sun was starting to go down below the tree line.  The photo on the right is moments after my New Year's Day 5k around my neighborhood.  Don't look too close, I was a little sweaty.  And P.S. I was at a New Balance store earlier today-- one long sleeved running top comparable to mine cost *more* than all the yards of fabric I got to make my own!  Yeah, seriously.  And it was very likely the same fabric. 


~Kathy 

Comments

  1. I always think about doing stretch piping like this when I'm doing active wear, then I always forget! After, I've sewn together a few pieces, I remember. By then, there is no way, I'm ripping out seams and cutting strips of piping!!!

    ReplyDelete
  2. Love all of these! Thanks for the tip on the thread and the elastic. The piping is a really nice touch!

    ReplyDelete
  3. Love this post! I've always wanted to make workout pants, I tried once with a regular leggings pattern and it was a total fail. All your gear looks so lovely. Thanks for sharing.

    ReplyDelete
  4. Oooh. Thank you thank you thank you for this post! I have some amazing active wear fabric from Fabric Mart that I received in a bundle and really want to try making some cozy comfy pants, and I love all the tricks and ideas you have here.

    And, yeah, I am impressed that swimwear fabric can work for running pants. :-) (That is how I exercise, btw, I swim, so I see that fabric and think suit, I love the outside of the box thinking on your part!)

    ReplyDelete
  5. Love all of them! I think I'm going to make a fully citron top, it's such a fun color, and yes, this fabric is super super soft. Glad to read it holds up after a few washes.

    ReplyDelete
  6. Did you get the pattern (from Papercut Patterns) as a download or by mail and if by mail, how long did it take to receive it? And how difficult were the pants to make? Thanks for some inspiration!

    ReplyDelete
    Replies
    1. Sorry for the super slow response!! Yes, I did get the paper version by mail. I've had it for a couple years (about that?) and feel like it took about a week and a half to get to me in the US here in Maryland.

      Delete
  7. I was just wondering where you use the Maxi-Lock Stretch thread on your serger. Do you use it just in the upper and lower loopers or in the needles too? I would think coverage from the upper and lower loopers would eliminate any chaffing to the skin. TIA for your advice.

    ReplyDelete
    Replies
    1. Judy-- I use the Maxi Lock Stretch thread in all four loopers on my serger. Regular polyester thread has no stretch at all while the maxi lock stuff will allow for more comfortable movement as well as comfort against the skin. I've made activewear in the past with just the regular cone thread and it feels a little more "tight" in a way, it's just a thing I can feel as I move. You can experiment and see what you prefer for sure.

      Delete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Week 4: Jeansmaking- What They Made

This is it, the final round! And we certainly did not go easy on our three remaining contestants this time. This round they had to make their own pair of well fitting jeans. I think they all did an absolutely outstanding job! Take a look what these ladies accomplished & be sure to vote for your favorite! (Link at bottom of post.) And, don't forget to show us your me-made jeans on Facebook or Instagram. Details at the bottom of this post. Danesha from  Classyfied Life So first I must say that this entire challenge has been just that...a challenge! Two weeks ago there was hurricane Irma and I was blessed enough to not lose power and then I went out into the aftermath to capture some photos of my submission. Then two weeks ago I had a big trip planned so I had to do EVERYTHING  in two days . Then the BIGGEST challenge of all...THIS week! I got the challenge and I was super excited to have an extra few days and then before I could even get started I ended up in the eme

Made By A Fabricista: A great tee shirt pattern – or three!

Hi fellow sewists! It’s Andrea  @happy.things.here and I’m here today to talk tee shirts!  I love a good tee pattern…or two…or four. Despite having more than enough of them in my pattern collection, I’m always up for trying a new one. And I also have my favorites and tried and trues (TNTs). I love the versatility of a good tee pattern – dress it up with fancy fabrics to make a work wardrobe piece, use a high quality solid to add some basics, or anything in between. Today I’m sharing three patterns I’ve used multiple times and with many different kinds of fabrics - all a little different and all great beginner patterns too. First up is the newest addition to my pattern collection – the Upland tee and crop top by Rivet Patterns. They are a newer designer who I recently discovered when this tee pattern caught my eye. I love that it has multiple bodice options including a classic design tee and also a crop version with different separate and uniquely shaped bodice pieces. I first made the

Made By A Fabricista: Dreamy Florals | A DIY Dress Inspired by Son de Flor's Spring Collection

Hi everyone!  When I saw this floral print linen/cotton blend make it’s way onto the to-be-described table I knew I had to make a dress from it.  I’d been staring dreamily at all the dresses from the brand Son de Flor who had just put out their spring collection and thought, maybe I can throw together something inspired by them!  I grabbed three yards of that floral shirting and a yard of SWC5682w to line the bodice with.  I used Simplicity’s S8946 for its simple bodice block.  This pattern has a gathered rectangle for the skirt, but I’m a sucker for a circle skirt so that’s where I decided to start.  I folded the fabric twice and cut out the longest circle the fabric would allow.  Then got to work on the bodice, sewing up the darts and attaching everything. Now, I don’t love installing zippers.  I ha d a lot of trouble getting them to sit right, and no matter how much mental gymnastics I do when first pinning one side is always put in the wrong way.  So while I did have to unpick and