Skip to main content

Pretty Peplum Top Sew Along: Selecting Fabric


Are you ready to begin? I'm really excited about the Pretty Peplum Top Sew Along and seeing what questions you have and how your tops turn out in the end! We will be covering each step in this sew along as well as modifications, tips and other ideas for this peplum top from Pamela's Patterns. Pamela will also be on hand to answer your fit questions!

So let's get started. Some of you may already have this step taken care of, but there may be some of you that need some guidance. This pattern calls for a good quality knit fabric. Pamela also gives a tip for making sure the fabric snaps back into place. This means it has to have stretch. When someone says "stretch" knit what does that mean? Mostly all knits stretch, but do they recover back to their original state? If they do, then they have spandex, lycra or elastine. (Lycra is a product and trademark by Dupont Company.) There is no technical difference between spandex, lycra or elastine. If you want to learn more about that, here is a good article about that

Here's an example of a knit without spandex/lycra:




Notice that I always have the left side lined up with 19" mark. As you can see with this particular fabric, the fabric was stretched and left go. It "grew" about an inch and did not recover. These fabrics usually will come back to position after being washed. 


Here's an example of a knit with spandex or lycra: 




Here you can see that the fabric was stretched but that the before and after photos measure the same. That means this fabric would be suitable for this pattern because it has good stretch recovery and will not grow as much as a 100% cotton/poly/rayon/etc. knit. 

I would recommend any light or medium weight knit for this pattern. I would not go much heavier than a ponte knit with some drape, because something that does not drape well will not create a nice, smoothing peplum. A stiff knit will create a peplum that stands out more like a tutu! 

I used a few different kinds of knits for the various peplum tops I created. I used an ITY knit, a jacquard double knit and a ponte knit.

An ITY knit is a lightweight jersey-like knit that is good for tops, skirts and dresses. I use ITY knit all the time and it comes in a lot of pretty prints and solids. I always think the photos showing the twist really help me visualize what the fabric would feel like. LIghtweight knits usually have small folds and that is evident in this photo. See all ITY knits we carry HERE.


A ponte knit, jacquard double knit or any other double knit with stretch would also be good. This type of knit is a light-medium weight so it will have a little more body than any ITY or jersey knit. Again, look at the folds. If they are big folds, this may be too stiff for this pattern. See all Ponte knits HERE.


The white fabric is a stiffer ponte than the tan fabric. You can tell this because of the flowiness of the folds in the tan versus the white. The white folds are much more structured. Of course if you want a structured peplum top, this could work for you!

Other knits that could be used are: rayon or cotton jersey knits, cotton interlock. I would not recommend a really lightweight or sheer jersey knit because they usually do not have a nice stretch and recovery factor. While I'm not sure I would make this pattern from a lace or mesh, it probably could be done! But I would recommend finding a lace or mesh with ample stretch. See our entire knit collection HERE 

So now go pick 2 1/4 yards of your choice fabric and get it washed! I ALWAYS pre-wash my fabric before cutting. I actually wash the fabric before it even makes it to my sewing room, so I always know that any fabric in my sewing room can be used. No guesswork! Then I'll see you next Friday with our first step...cutting out the pattern! 

Comments

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: From Paris with Love!

Bonjour! I am still in bliss from my recent trip to Paris!!  It was much more than I expected and I absolutely fell in love with the city. I can honestly see myself living there one day. I knew before leaving I wanted to make something to fit into the Parisian landscape because I knew it would be a special opportunity. I was inspired by one of my favorite fashion creators Juliette Foxx. Her checked gingham corset and wide leg pants were on my list to remake. For fabric I used this red and white pin stripe denim twill and deep red sateen for the pants.  The pattern I used for the corset was McCall’s #M8182 with a few modifications.  The fit was a little large so I took it in along the sides and shoulder seam.  I then lowered the neckline since the shoulders were taken in. I used the sateen as my lining which gave a great contrast.  My pants are my unreleased pattern which happens to be exact from the inspiration.  I drafted these last year and have been wo...

Made By A Fabricista: Basics vs Fun Clothes

Every summer I make flowy, pretty dresses because they are so fun for me to make, wear, and they keep me cool as temperatures rise. But when the days get shorter and autumn rolls around, I’m not always confident on how best to transition my summery dresses into garments that will allow for the seasonal changes. In an effort to be more intentional about maximizing the use of my clothing, I thought long and hard about what I wanted to make for August. It’s been a hot summer in New Jersey. From what I can see, it’s been a hot summer across the US. Looking for clothing that will keep me cool, perhaps hide some sweat stains, and allow me to transition between seasons, I decided to make separates that would pair well with each other and allow me to mix and match with the rest of my wardrobe. For the top, I wanted a basic tank top, something I could layer later on. For the bottoms, I wanted flowy, summery pants that can last into brisker weather or become phenomenally cozy in front of my wint...

Made By A Fabricista: Sewing Summery ITY

Hi sewing friends! I’m dropping in to share a few makes sewn with ITY fabrics and inspire you to try out this slinky, cool-to-the-touch fabric for hot weather if you haven’t yet, or to recommend some patterns that work fabulously if you already love it. This is by far my favorite knit to wear in summer. Since it moves easily there’s lots of airflow, and it just skims the body. More often than not, it has a four-way stretch that doesn’t grow when worn, so it works great for loads of styles.  ITY stands for Interlock Twist Yarn and the knit gives it some wonderful drape and stretch. There are lots of different weights and even some differing textures. Because it’s so fluid, the fabric really resists most wrinkling. I’ve sewn three different weights and prints here to show off just what ITY can do!  This white floral is a lighter weight and features a slightly crepe-textured finish, and I think that combined with the large and spread-out floral makes it quite elegant and eye-cat...