Skip to main content

Made by a Fabricista: Comfy and Cute


The fall season is definitely upon us and the winter is quickly approaching. During these chilly/cold months I love to feel comfy and warm but I still want to look casual chic. Lets face it - the comfiest outfits aren't always cute. Thankfully McCalls released M7688 just it time to provide four different "fashionable" takes on the cozy, winter staple - the sweatshirt. I will likely make all of these views but I started with View E, the drawstring tunic.



I've found the type of sweatshirt fleece that is used in retail wear is difficult to find by the yard. I've order sweatshirt fleece online before that had no stretch - a huge NO GO - for me. Locally a big box store offers a sweater fleece that I find has stretch but is very thick, to thick for practical wear in the south. I decided to give this Candy Red Sweatshirt Fleece a try as it listed 40% stretch and light/medium weight. It has a knit right side and a soft fleece wrong side. I'm very pleased with it as it sewed up easily. Unfortunately it is sold out, but keep checking because I hope they get more in.



I was drawn to View E because it seems like a great go-to outfit for chilly fall days over tights or even fleece lined leggings. It's cute enough to be seen in while running errands or when that unannounced guest stops by during the holiday season and yet still comfy enough to wear all day.


This pattern sews up quickly and the instructions are clear. The only thing that confused me was the fact that the casing for the drawstring sewn to the right side of the front. I just assumed the photo on the cover had the casing on the inside and I started to do just that but ended up following the instructions. Now that it is sewn up I don't mind it on the outside as it just draws more attention to that feature. I'm not 100% sold on the drop shoulders either.


This project sewed up so well that I decided to make a girls version. I knew McCalls 6785 would work great, because I've used this pattern before. For the casing I cut a 14" long by 2.5" wide strip of fabric and sewed a 1/4" hem on each long edge and a 1/2" hem on one short end. Then I eyeballed and pinned the strip to the dress front before sewing in the ditch along both sides and stitching down the middle. Her's is a hooded version, because she loves them.


I hope you had a great Thanksgiving!

Tiffany
TipStitched

Comments

Popular Posts You Might Like

Made By A Fabricista: Basics vs Fun Clothes

Every summer I make flowy, pretty dresses because they are so fun for me to make, wear, and they keep me cool as temperatures rise. But when the days get shorter and autumn rolls around, I’m not always confident on how best to transition my summery dresses into garments that will allow for the seasonal changes. In an effort to be more intentional about maximizing the use of my clothing, I thought long and hard about what I wanted to make for August. It’s been a hot summer in New Jersey. From what I can see, it’s been a hot summer across the US. Looking for clothing that will keep me cool, perhaps hide some sweat stains, and allow me to transition between seasons, I decided to make separates that would pair well with each other and allow me to mix and match with the rest of my wardrobe. For the top, I wanted a basic tank top, something I could layer later on. For the bottoms, I wanted flowy, summery pants that can last into brisker weather or become phenomenally cozy in front of my wint...

Made By A Fabricista: From Paris with Love!

Bonjour! I am still in bliss from my recent trip to Paris!!  It was much more than I expected and I absolutely fell in love with the city. I can honestly see myself living there one day. I knew before leaving I wanted to make something to fit into the Parisian landscape because I knew it would be a special opportunity. I was inspired by one of my favorite fashion creators Juliette Foxx. Her checked gingham corset and wide leg pants were on my list to remake. For fabric I used this red and white pin stripe denim twill and deep red sateen for the pants.  The pattern I used for the corset was McCall’s #M8182 with a few modifications.  The fit was a little large so I took it in along the sides and shoulder seam.  I then lowered the neckline since the shoulders were taken in. I used the sateen as my lining which gave a great contrast.  My pants are my unreleased pattern which happens to be exact from the inspiration.  I drafted these last year and have been wo...

Made By A Fabricista: Sewing Summery ITY

Hi sewing friends! I’m dropping in to share a few makes sewn with ITY fabrics and inspire you to try out this slinky, cool-to-the-touch fabric for hot weather if you haven’t yet, or to recommend some patterns that work fabulously if you already love it. This is by far my favorite knit to wear in summer. Since it moves easily there’s lots of airflow, and it just skims the body. More often than not, it has a four-way stretch that doesn’t grow when worn, so it works great for loads of styles.  ITY stands for Interlock Twist Yarn and the knit gives it some wonderful drape and stretch. There are lots of different weights and even some differing textures. Because it’s so fluid, the fabric really resists most wrinkling. I’ve sewn three different weights and prints here to show off just what ITY can do!  This white floral is a lighter weight and features a slightly crepe-textured finish, and I think that combined with the large and spread-out floral makes it quite elegant and eye-cat...