Skip to main content

Made by a Fabricisita: Winter (Navy) Blues

I hope everyone has enjoyed this holiday season with family and friends. For those who have suffered a loss, bad times or any other difficulty I hope that you found comfort during what may have been a difficult time. I was fortunate to spend some time off with my immediate family and reach out to those who are further away. Now the countdown is on to the New Year.


I'm so excited to share my latest project with you, because this Clare coat is my very first *REAL* coat. Sure I've made several bomber jackets and a few knit cardigans, but not a wool, fully lined coat like this one. I'm so proud of it, I've been wearing it everywhere.


This pattern is great pattern for a first time coat maker. There are several pattern pieces, a ton of interfacing and dozens of steps, but as expected with indie patterns the instructions and illustrations are very clear and as an added bonus Heather offers a detailed sewalong on the Closet Case blog.


The recommended fabrics include medium to heavyweight coating fabrics, such as melton, felt, tweed or boiled wool so I chose this Navy Wool Melton Coating. Unfortunately this fabric is sold out but there are several wool options in the coating category. After debating the color I settled on this gold crepe backed satin for the lining.


I choose View B mainly because I didn't have the horsehair canvas that View A requires, but I also thought it would be a little more forgiving as far as fit since I didn't plan on making a muslin. Based on the finished measurements I selected a size 16 and it fits well, my only issue is under the arms where I could use a little more ease.


On to the construction, I decided to fully interface all of my outer pieces and figured it would be quickest to block interface my wool. I did this by laying my weft interfacing  fusing side down on the wrong side of my wool and spot fusing every foot or so all over my fabric. Then I cut and marked all nine of the main pattern pieces, which honestly seemed to take forever, but it was worth it in the end. I saved cutting the lining for later (except for the pocket lining which you need for the outer shell construction).


The first steps are simple and typical for any coat (or top really) construction. One new thing for me here was adding twill tape at the underarm seam and collar seam for stability as these are high stress points on a coat. The other was bar tacking at the pocket top and bottom.


Once you assemble all the main outer shell you're more than halfway complete and it begins to look like a coat!


When I was researching the Clare coat pattern I noticed that both Jodi of Sew Fearless and Alison of Curate and Create added piping between their lining and facing and I feel it gives the coat an extra touch that I wanted to incorporate as well. Though in the final product I feel the red added to the gold and the navy looks a bit like a crayon box, the three primary color work well together on the color wheel and they work well here.


After adding the piping to the facing I spent another almost eternity cutting out the lining fabric and proceeded to construct the lining as instructed.


My favorite is this hanging loop because it such a small, but professional detail. I also added my label at this stage to avoid hand sewing later.


Finally it was time to attach the lining to the shell of the coat. This is the only place were I could see someone getting lost if she/he has never bagged a lining before. Attaching the sleeves seems strange the first time you do it (I learned this trick previously when lining my bomber jackets), but it really does work.


I was so excited that I actually wore my coat to work before even adding the snaps because I just couldn't wait. I debated going with a exposed zipper (an option shared on the Closet Case blog) but I'm glad I stuck with the snaps. I used 5 size 10 gold sew on snaps that I spaced about 6" apart.


I am simply ecstatic about my new coat and I'm sorta sad it took this long for me to make one. I'm also sad for probably the first time that we don't get many days here in the southeast that are cold enough to wear this coat. Thankfully, we hardly ever have weather cold enough to require interlining my coat. I'd love to make View A (probably next year) with a bright color wool like yellow or Pantone's new color of the year ultraviolet.


I think I've caught the coat making bug! What's your favorite coat pattern?

See ya next year!

Tiffany
TipStitched

Comments

  1. Lovely coat and it looks fabulous. Worth the time and much effort it took to complete. Looks great on you too. Way to go. Happy New Year to you and yours!

    ReplyDelete
  2. Cute!!! I'm sewing the Clare next month, then a navy coat(!) from Burda, then a trench! :)

    Love the color of his fabric and it looks great on you!!

    ReplyDelete
    Replies
    1. Can't wait to see yours! I think I may be ready for a trench, I'll add that to the list.

      Delete
  3. I think I like this coat pattern! Well done and nicely detailed on the blog. Maybe you could make it in a little lighter fabric and interline it with fusible interfacing to make it drape more like coat fabric and make another one more in line with your weather.

    ReplyDelete
    Replies
    1. Great, you should definitely try it. I definitely want to make View A as well so maybe I'll use a lighter fabric for that one.

      Delete
  4. What a beautiful coat. A coat that can be worn for years to come. Happy New Year!

    ReplyDelete
  5. You have convinced me to try this pattern. This is not what I thought it would look like on. I like it! I have wool waiting to be made into a coat. Thanks for the push. Nice job.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Week 4: Jeansmaking- What They Made

This is it, the final round! And we certainly did not go easy on our three remaining contestants this time. This round they had to make their own pair of well fitting jeans. I think they all did an absolutely outstanding job! Take a look what these ladies accomplished & be sure to vote for your favorite! (Link at bottom of post.) And, don't forget to show us your me-made jeans on Facebook or Instagram. Details at the bottom of this post. Danesha from  Classyfied Life So first I must say that this entire challenge has been just that...a challenge! Two weeks ago there was hurricane Irma and I was blessed enough to not lose power and then I went out into the aftermath to capture some photos of my submission. Then two weeks ago I had a big trip planned so I had to do EVERYTHING  in two days . Then the BIGGEST challenge of all...THIS week! I got the challenge and I was super excited to have an extra few days and then before I could even get started I ended up in the eme

Made By A Fabricista: A great tee shirt pattern – or three!

Hi fellow sewists! It’s Andrea  @happy.things.here and I’m here today to talk tee shirts!  I love a good tee pattern…or two…or four. Despite having more than enough of them in my pattern collection, I’m always up for trying a new one. And I also have my favorites and tried and trues (TNTs). I love the versatility of a good tee pattern – dress it up with fancy fabrics to make a work wardrobe piece, use a high quality solid to add some basics, or anything in between. Today I’m sharing three patterns I’ve used multiple times and with many different kinds of fabrics - all a little different and all great beginner patterns too. First up is the newest addition to my pattern collection – the Upland tee and crop top by Rivet Patterns. They are a newer designer who I recently discovered when this tee pattern caught my eye. I love that it has multiple bodice options including a classic design tee and also a crop version with different separate and uniquely shaped bodice pieces. I first made the

Made By A Fabricista: Dreamy Florals | A DIY Dress Inspired by Son de Flor's Spring Collection

Hi everyone!  When I saw this floral print linen/cotton blend make it’s way onto the to-be-described table I knew I had to make a dress from it.  I’d been staring dreamily at all the dresses from the brand Son de Flor who had just put out their spring collection and thought, maybe I can throw together something inspired by them!  I grabbed three yards of that floral shirting and a yard of SWC5682w to line the bodice with.  I used Simplicity’s S8946 for its simple bodice block.  This pattern has a gathered rectangle for the skirt, but I’m a sucker for a circle skirt so that’s where I decided to start.  I folded the fabric twice and cut out the longest circle the fabric would allow.  Then got to work on the bodice, sewing up the darts and attaching everything. Now, I don’t love installing zippers.  I ha d a lot of trouble getting them to sit right, and no matter how much mental gymnastics I do when first pinning one side is always put in the wrong way.  So while I did have to unpick and