Skip to main content

Made by a Fabricista: One Dress for Mama, one for a Little Lady

Howdy! Jess here again.  Today I'm sharing a versatile make for myself, and a sweet little set for my daughter, who we're still waiting to meet.  Let's start with my look!


This is Deer & Doe's Aubepine, or as I discovered via Google Translator translates to Hawthorn.  Also very important:  IT HAS POCKETS!




I'm usually a 40-42 in Deer & Doe, but with 40+ extra pounds of baby, etc. opted for a 44, plus added a 1/2" full bust adjustment on each side (so, 1" total extra bust room) and am quite happy with the fit!  I also found the empire waist to cut me a little short, and the dart was also a bit too high, so I lengthened the bodice 1" above the dart and it hits in a great spot now.



The thing that really drew me to this pattern was the easy, breezy style.  I'd actually had it prepped and ready to make during my last pregnancy but had never gotten around to it.  Glad I did this time!  Besides the FBA, I made no other alterations to account for The Belly!  Yes, these photos were taken at 38 1/2 weeks and there were no adjustments made to account for all of that baby up front.  Of course it is a tad short, due to said belly, but as a enormously pregnant person I'm not going to worry about it, because my shape will be changing again very soon.  Also, it's still pretty chilly here, so:  yay leggings!



Also, these sweet little tucks are pretty fun.


While this dress works perfectly as designed for my needs now, I'm at the point in pregnancy where my garments really need to have a dual purpose.  I added a 1" center front buttoned placket for nursing access once the wee gal is born, and used 3/4" buttons both for this garment and for baby's (I also used the same navy grosgrain ribbon for both).  I considered a few options for nursing access, including invisible zippers or a pull up option, but ultimately decided this was the easiest and most predictable solution to my predicament.


The only thing I am not that jazzed about with this pattern is the sleeves.  Curiously, the instructions called for setting in these woven sleeves without any sleeve cap easing.  I tried to do so, but wasn't getting a good result, so did end up very slightly gathering the sleeve cap to fit it in.


Once the dress was done, I was disappointed with the initial try on (the sleeves were the one thing I hadn't muslined) because the sleeves were strangely restrictive up top and just felt...wrong.  I do not believe there is enough length or ease in the cap for the designer's intended fabrics.  However, when I put this dress on again to take photos later it didn't bother me as much, so your mileage may vary.


I used a lovely blue cotton batik for both my dress and baby's.  While technically a quilting fabric, it definitely has a more smooth, crisp and refined feel than most.  I heartily approve it for garment use.  It just seems to have sold out, but you can find alternatives here.



 For baby's pinafore, I used this navy plain woven cotton.  It's definitely a bit coarser than the batik, but still nice for garments.


And now onto the Little Lady's ensemble!


The dress is Violette Field Threads Georgia, and the sweet pinafore (which also has a dress option) is Violette Field Threads Pearl.  They're sold separately or as a bundle; I loved the combined look on their site, so I opted for the latter.


These were both pretty straightforward to put together, but reminded me heartily of a musing I had when I found out my first child was a boy:  at least I don't have to deal with sewing ruffles.  Do I love the look of ruffles?  YES!  Do I like sewing and distributing all of those dang gathering stitches?  Noooo.


I realize there are gathering feet (some of which I own) that can help me with this, but they're only good if you're gathering a random piece of fabric onto another; if you want to gather an exact amount of fabric onto another piece you definitely still need to put in the work and do the annoying long basting stitches and tedious spreading of gathered fullness.


But heck, these did turn out pretty cute.


I made a size 6-12 months because I feel like super frilly dresses look odd on babies that aren't even able to sit up.  Maybe a weird notion, but I figure it's so much easier for babies to live in onesies and sleep n plays until around 6 months old.


Georgia was pretty much all smooth sailing.  It came with an option for a plain gathered skirt and another option for a 3 tiered gathered skirt.  I wanted a bit more hem fullness but didn't want to gather 3 tiers, so I ended up shortening the plain option and adding the third tier to the bottom.  I used my rolled hem foot to finish the bottom edge.  I'm a fan of the result.


Pearl was also pretty easy, except for the sleeve ruffle.  The pattern calls for completely sewing the shoulder seam shut, ruffle enclosed burrito-style, but there was just way too much bulk to turn the ruffle and back bodice through to the front.  In lieu of a more appropriate term, I basically had to do an episiotomy on the shoulder seam to get everything through, which I hand stitched closed after.  For this reason, I'd recommend a cotton lawn or voile if you plan to make this pinafore with the sleeve ruffles:  anything heavier will just cause a headache.


And...that's all she wrote!  I'll be taking a few months off of the blog to convalesce and adjust to life with two littles, but hope to see you all again in the Autumn or so.

Until our next sewing adventure...


Jess

Comments

  1. Both dresses are lovely! Your daughter will have a pretty something to look forward to after she arrives. Lovely fabric!

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Recent Posts You Might Like

Sewing With Intention: New Look 6106 and a More Coordinated Wardrobe

Sometimes a sewing project begins with a beautiful piece of fabric or a pattern you just have to make. This one began with my closet. Recently, I did a major closet purge. I took a good look at what I actually wear, what I kept reaching for, and—maybe more importantly—what was missing. Once the pieces I no longer loved or wore were gone, something became very clear: I want to be more intentional about what I sew next. Instead of sewing individual pieces that I love but don't necessarily wear together, I want to build a wardrobe where my handmade garments coordinate with the clothes I already own—and with the pieces I'm planning to sew next. For this month's Fabricista project, this beautiful lightweight shirting from Fabric Mart turned out to be a wonderful place to start. The Fabric That Started It All Fabric Mart provided this beautiful oatmeal and black heathered shirting , along with the matching thread for my project. One of the things I love most about this fabric is ...

The Perfect Plan for this Linen Blend! Until I Changed My Mind.

Hello Sewing Friends!  It’s Sharon from Sharon Sews with another Fabricista make.  When I saw this linen blend designer fabric on the Fabric Mart Fabrics website, I was intrigued.  After all, I, like many of you, love to find designer fabrics at an affordable price. It is a linen/nylon/rayon/Lycra blend, and I wondered what the designer had created with the fabric as I wasn’t familiar with that combination of fibers.  Surprisingly, I discovered a sleeveless, lined, mid-length vest in the same color with an almost identical fabric composition. Perfect! I’ve been wanting to sew a longer vest with matching pants, and that discovery confirmed this fabric would work beautifully for the look I had in mind.  The vest I’m wearing, from the June 2026 Burda Style magazine, it is not what I was originally going to make.  You see when I found the designer’s vest, I remembered seeing a Butterick pattern that was almost identical.  I ordered the pattern excited to...

Fall + Flannel = Shacket

If there is one piece that transitions easily between crisp fall mornings, mid-day warmth, and chilly autumn nights, it’s a shacket. Today, I’m excited to share my latest Fabric Mart make: the Ellie and Mac Patterns Connie Casual Shacket, sewn in a dreamy plaid flannel coating fabric . Here’s a glimpse at how it came together, along with a few construction tips for planning your own version! The Ellie and Mac Patterns Connie Casual Shacket pattern offers plenty of options needed to make the perfect transitional top layer for fall. With a relaxed body, oversized sleeves, three lengths, and a curved or straight hem option, you can make your dream shacket a reality.  For this sew, I selected a plaid flannel coating fabric with a soft blend of sage green and cream tones from the Fabric Mart website. Heavyweight flannel is ideal for a shacket because it provides structure and added warmth. As a bonus, this particular fabric is extra soft and snuggly, which I love. In addition to the fa...

Return to work wardrobe in ITY – which is your favorite?

In June of this year, after spending nearly 11 years at my place of employment and after restructuring and cost cutting, I took a separation package. I was so fortunate to be able to take a few months off, and also to very quickly find a position with a new company. I start my new job on September 14th and I’m super excited!  This new position is also different for me in that it is local to my area (whereas before I worked remotely and traveled to the office every few weeks) – so I’ll be going into the office three times a week. So of course I needed to sew up some new outfits! I’m a huge fan of ITY knit fabric ; ITY stands for interlock twist yarn, which describes the way the yarn is knitted together. I love it for tops, dresses, skirts, and even pants: it’s comfortable, easy care, low wrinkle, and comes in so many beautiful prints. I sewed up three new outfits over the last two weeks and I’m excited to share them with you today! Oh, and also – I need help choosing what to wear fi...