Skip to main content

Made by a Fabricista: Making My First Pair Of Jeans

 Hey everyone! Welcome back to my second Fabric Mart Fabricista post!

When I selected my fabrics, I had a completely different idea in mind for what I wanted to make. But the more I thought about it, and the closer I got to starting my project, the more I dreaded the make! 

Then, my office job announced that we are going to start going back to the office 2x/week, so I decided to ditch my original plan and come up with a couple pieces that I could use for transitioning back to the office.

I knew I wanted something easy to throw on that I could style a couple of different ways, which is how I settled on this neutral colored Crinkle Chiffon that I got for $1.99/yard! I used McCall #8030, View A. Making buttonholes give me heartburn enough the way it is, but the thought of trying to do it on chiffon nearly sent me to the grave… so pearl snaps to the rescue! 

This pattern is meant as a dress, but with the sheer nature of the chiffon, I went for a layering top. The pattern also calls for more structured fabrics like shirting fabrics or poplin but since it’s summer and will be hot soon, a breezy chiffon sounded like the right fit! I also think Fabric Mart’s linen would be a perfect fabric for this in a dress.


Chiffon is not for the faint of heart! I would recommend you to be a confident/advanced beginner, as it can be very fussy and finicky to work with. Another small (but very important!) tip I would give for chiffon or any delicate type materials, is to make sure you have cut/filed your nails, so there are no rough edges or broken nails to snag the fabric on! It sounds silly, I know, but I had to pause early in the project to do this, since I snagged one of my already cut pieces badly with a broken nail! 

If you do fall victim to a snagged piece of chiffon, don’t pull any further on the thread! This will cause a run in the entire piece. Instead, gently pull the fabric from the ends where the snag is, lay it flat, and then continue to use your fingers to gently wiggle the fabric until it lays flat again, and as you wash and steam, it will be good as new!

As I mentioned, I wanted a top I could style a few different ways and with a belt and a layer underneath, it can be worn a couple different ways. 

The other fabric I chose was a cotton lycra blend denim and it is *so perfect* for stretch skinny jeans. I also grabbed this fabric when it was on sale and for less than $20, I have a perfect fitting pair of jeans! I didn’t have to make any adjustments to this pattern either, which was a first for me, since I almost always have to adjust the length. 

I used Closet Core Patterns, Ginger Jeans, View B for this pair.

Making jeans has always been so daunting and a zippered fly seemed impossible. But I have to tell you all – if you have even the slightest interest in making a zip fly style pair of pants, you absolutely must go purchase this pattern from Closet Core. The instructions for the fly were so incredibly detailed and well-illustrated that I didn’t feel overwhelmed once! Go slow, read and re-read each step twice before starting and you will do great.

One of my favorite fun details in my jeans are the pocket linings. I knew I wanted to use up some scrap cotton and I am a big-time cat lady, so this was the perfect little detail!

For my topstitching, I used a combination of my coverstitch machine for the twin needle and a sewing machine for the single stitches. It’s not perfect, but I love how they turned out! I left these jeans unhemmed with a raw edge, since I haven’t decided if I want to hem them, or if I want to make them ankle length with a raw edge! These jeans will be a staple in my wardrobe with the great stretch and higher waisted fit. 

Thanks for following along with my first jean make! It definitely won't be the last the next time I see some of this denim on sale at Fabric Mart again!  

CHELSEA @thatssewchelsea

Unfortunately Fabric Mart Fabrics sell out quickly!
You can find similar fabrics by shopping the following categories: CHIFFON & DENIM
You can also shop our selection of Closet Core Patterns HERE.

Comments

  1. Your jeans are perfection. I like your top too.

    ReplyDelete
    Replies
    1. Thanks JD! They fit like a dream, I am SO happy with that pattern!

      Delete
  2. Wow! These are impressive makes and beautifully done, Chelsea!

    ReplyDelete
    Replies
    1. Thank you so much!!!! I look at them in my closet every day wanting to wear them... but with the forecast at 98 degrees + every day, they will be waiting a bit longer :)

      Delete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Wrapped up in Denim

Denim is definitely one of my favorite fabrics to wear during the fall, more than any other season. I'm sharing my first denim project for Fall 2023 in this months Fabricista feature because let's be real, its one of the most iconic fabrics ever, its always in style and most everything can be made with denim. This denim is Fabric Marts Deep Prussian Blue 100% Cotton Denim, and it was the perfect fabric for this project. I really enjoyed working with this denim. It had a little more drape and body than most denims that are stiff and don't provide much give, but of course that's the good thing about denim, it comes in so many ranges which makes it clearly the best fabric for any project. I created a hack for my most recent Fall KnowMe pattern, ME2054. But not only did I hack this pattern, but I did a pattern mash with my Spring KnowMe pattern ME2020, creating this cool, chic denim jumpsuit.  Now, I've really gotten into creating jumpsuits more than ever. We all know h...

Help Our Buyers Shop!

  Comment on this post with what you are looking for right now and our buyers will seek it out!  I am craving wool gabardines and ponte knits in fun autumn colors. What about you?

Made By A Fabricista: Spring Into Bold Closet Core Mitchell Trousers in Linen Cotton

Hello Sewing Friends! It's Tira from Tira Cooks and I am so excited to share my very first Fabricista make with you all! When I spotted this white linen cotton blend with bold black and green printed illustrations I immediately knew it was the perfect way to welcome spring. The combination of linen and cotton keeps you cool during the day and comfortable as the evening cools down truly the ideal spring fabric. Can we take a moment to appreciate this print? Cheetah print, a sun face, long stripes, and flowers all in one design. Everything you would not expect to see together, but somehow it just works. What really drew me in is the scale of the print it is bold enough that you can see every single detail. Unexpected, maximalist, and done right. Before cutting into anything, we cannot skip fabric prep! Linen cotton blends must be pre-washed before cutting to prevent shrinkage. I also recommend serging or zigzagging raw edges immediately to control the heavy fraying that linen is...