Skip to main content

Made By A Fabricista: Liberty Snow Day


Hi everyone!

While we’ve been blanketed with snow out here in Southeastern PA, I decided to conquer my fear of button holes and make NewLook pattern N6749. I was able to snag a few yards of the Jess + Jean print Liberty of London Tana Lawn for it.

It’s always exciting when Fabric Mart is able to get Liberty fabrics in! I always make sure to grab some.  Cutting into a beautiful piece of tana lawn is scary every time. The fabric is such good quality, I’m afraid to mess it up! I had to be extra careful as this is also the first directional pattern I’ve worked with. But one of my assistants made sure all of my pieces were laid correctly.

Something I wanted to try out with this dress was finishing the inside seams using the overlock stitch on my domestic machine. Normally I would french seam, but it was nice to not have to worry about cutting seam allowance in half, sewing, trimming, flipping, and sewing again. Next time I would cut the seam allowance back before overlocking, but I think the inside still looks nice and neat! 


I wasn't completely sure how to finish off the gathered waist edge in this method. I thought about binding it off but overlocked it carefully in the end. I’ll keep an eye on this seam after washing.

I picked up a Simflex Sewing Gauge to help space out my buttons and button holes. My fist sewing machine had a button hole foot, but did such a terrible job at making the button holes that I’ve avoided them for the last couple years. But after making a few test button holes on some scraps of the tana lawn, this machine doesn't seem to have those issues! No more avoiding button holes for me!

I definitely have some fit issues in the bust, but it’s perfect in the waist.  Might 2025 be the year I learn to do bust adjustments? Stay tuned!


Lastly, I’m in the market for a serger! I’ve never had one and only used a serger twice before. I’m looking for something I can have for a good couple years but won’t break the bank and that doesn’t require a physics PhD to thread and operate. If anyone has any suggestions please leave them below!  Thank you!

KAYLA  @nebulanovem

Comments

  1. Very pretty! Spring is coming closer every day and you are ready with this lovely dress! I am also a little afraid to cut into Liberty fabric - I have one piece and am carefully evaluating what to do with it :)

    ReplyDelete
  2. It looks perfect! I don't see a problem in the bust are, but you can do what I do ...choose a different bra! It can really make a difference.

    ReplyDelete
    Replies
    1. I'm glad it doesn't show! I'm standing with my shoulders all the way back. If I stand normally or slouched at all the front moves away from my body. I'll definitely have to see if any of my other bras help, that's good advice! Might have to just tape that sucker down though, haha!

      Delete
  3. The Brother 1034DX is a great machine, very reliable, and available at Big Box stores everywhere at a terrific price. It is four thread and has a free arm feature. Super simple to thread too, and all of the stitches will you need for your projects.

    Your dress is beautiful! Thank you for picturing your button/buttonhole guide. I forgot I have one until I saw yours. Now where did I put it?…

    ReplyDelete
  4. I love my Imagine serger from BabyLock ! The jet-air threading system makes it so easy to use !

    ReplyDelete
  5. I had a top of the line Bernina Serger that converted to a coverstitch as well. It was in the shop and I needed a serger right away for a job I was doing so I bought a Juki serger under 500.00 dollars to have as my back up. The Juki serger is amazing! I have had it for several years and I love it. I sold the Bernina and bought a stand alone coverstitch machine. Haven't regretted it once. It's easy to clean and always forms great stitches. Cannot recommend any more highly.

    ReplyDelete
  6. What a beautiful dress and it fits you so well.

    ReplyDelete
  7. I have a Bernina. My original serger was an old, used, Pfaff which was difficult to use. I recommend going into shops and test driving to see what you like best. Modern sergers are easier to use than the old models from the 70's and 80's that I started on. If you buy from a good store, classes are included, and this can be well worth the extra money.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Recent Posts You Might Like

Made by a Fabricista: What to Make with Silk Taffeta

You may have noticed that Fabric Mart has a *HUGE* selection of silk taffeta right now.  A lot of it is either large plaid or large stripes.   I was curious about it, and not really sure what I could make with it, but I just knew it would be gorgeous fabric and had to play around with it.  Turns out, it's actually great for quite a range of projects!  The dress above is my third project. Let me show you the first two. My first was to make some queen size pillow shams.  They are the plaid ones in the back of the photo.  I also made the two printed ones in the center from another Fabric Mart home dec fabric special!  I wanted to make the covers removable with a zipper, and include a braided trim.  As luck would have it, I found a whole card of braided trim at an estate sale that worked with my taffeta for just $2! To start, I used a zipper foot to stitch down the braided trim all around one side of the pillow. Then I serged ...

A Yard And Change

Do you have a fabric that you love and has been hanging around but is too small to use? Maybe you found a wonderful fabric with a super cute print but there's only a yard left.  I've got a few projects I worked on all with roughly a yard of fabric. And I have a few tips for making that yard and change go further! Cutting Layout: You can get a lot more mileage out of a yard of fabric if you can get creative with how you lay out your fabric. Cutting things single layer will give you the most control. My favorite thing to do is unfold the fabric and fold the selvages in to meet in the middle. That gives me two folded edges to work with. I had to overlap these to get enough width for the tank top. Just make sure that your pattern pieces don't also overlap!  This one was especially fun for me because I really loved the print on this swimwear knit but am not yet up to sewing swimwear. But a nice flowy hiking tank is perfect for this! In the future I'd love to experiment with...

Help Our Buyers Shop!

  Comment on this post with what you are looking for right now and our buyers will seek it out!  I am craving wool gabardines and ponte knits in fun autumn colors. What about you?

Made By A Fabricista: Burnside Bibs

Hi everyone, this is Byrd with my latest Fabricista make! If you’re looking for the perfect handmade piece for spring and summer travel, these just might be it. This time around I’m sewing up the Burnside Bibs by Sew House Seven using Fabric Mart’s gorgeous Aquamarine/Umber Brown 100% Cotton Floral Artisan Batiks Jungle Dreams by Robert Kaufman. From the moment I saw this fabric, I was completely drawn in by the colors. The combination of aquamarine, brown, and cream feels both earthy and vibrant, making it perfect for warm weather sewing. I immediately knew it would make an incredible spring or summer garment. I’m a longtime fan of Robert Kaufman fabrics and always appreciate the quality and artistry behind the prints. As always, and especially because this is 100% cotton, I gave the fabric a thorough wash and dry before cutting into it. Trust me, I’ve learned the hard way over the years that addressing potential shrinkage before sewing is always worth the extra time. This blouse is...