Skip to main content

Made By A Fabricista: Liberty Snow Day

Image
By

Hi everyone!

While we’ve been blanketed with snow out here in Southeastern PA, I decided to conquer my fear of button holes and make NewLook pattern N6749. I was able to snag a few yards of the Jess + Jean print Liberty of London Tana Lawn for it.

It’s always exciting when Fabric Mart is able to get Liberty fabrics in! I always make sure to grab some.  Cutting into a beautiful piece of tana lawn is scary every time. The fabric is such good quality, I’m afraid to mess it up! I had to be extra careful as this is also the first directional pattern I’ve worked with. But one of my assistants made sure all of my pieces were laid correctly.

Something I wanted to try out with this dress was finishing the inside seams using the overlock stitch on my domestic machine. Normally I would french seam, but it was nice to not have to worry about cutting seam allowance in half, sewing, trimming, flipping, and sewing again. Next time I would cut the seam allowance back before overlocking, but I think the inside still looks nice and neat! 


I wasn't completely sure how to finish off the gathered waist edge in this method. I thought about binding it off but overlocked it carefully in the end. I’ll keep an eye on this seam after washing.

I picked up a Simflex Sewing Gauge to help space out my buttons and button holes. My fist sewing machine had a button hole foot, but did such a terrible job at making the button holes that I’ve avoided them for the last couple years. But after making a few test button holes on some scraps of the tana lawn, this machine doesn't seem to have those issues! No more avoiding button holes for me!

I definitely have some fit issues in the bust, but it’s perfect in the waist.  Might 2025 be the year I learn to do bust adjustments? Stay tuned!


Lastly, I’m in the market for a serger! I’ve never had one and only used a serger twice before. I’m looking for something I can have for a good couple years but won’t break the bank and that doesn’t require a physics PhD to thread and operate. If anyone has any suggestions please leave them below!  Thank you!

KAYLA  | @nebulanovem

Comments

  1. AnonymousJanuary 24, 2025 at 9:00 AM

    Very pretty! Spring is coming closer every day and you are ready with this lovely dress! I am also a little afraid to cut into Liberty fabric - I have one piece and am carefully evaluating what to do with it :)

    ReplyDelete
  2. Kathy BanfieldJanuary 24, 2025 at 10:04 AM

    It looks perfect! I don't see a problem in the bust are, but you can do what I do ...choose a different bra! It can really make a difference.

    ReplyDelete
    Replies
    1. KaylaJanuary 24, 2025 at 11:11 AM

      I'm glad it doesn't show! I'm standing with my shoulders all the way back. If I stand normally or slouched at all the front moves away from my body. I'll definitely have to see if any of my other bras help, that's good advice! Might have to just tape that sucker down though, haha!

      Delete
  3. RJanuary 24, 2025 at 5:08 PM

    The Brother 1034DX is a great machine, very reliable, and available at Big Box stores everywhere at a terrific price. It is four thread and has a free arm feature. Super simple to thread too, and all of the stitches will you need for your projects.

    Your dress is beautiful! Thank you for picturing your button/buttonhole guide. I forgot I have one until I saw yours. Now where did I put it?…

    ReplyDelete
  4. AnonymousJanuary 24, 2025 at 8:22 PM

    I love my Imagine serger from BabyLock ! The jet-air threading system makes it so easy to use !

    ReplyDelete
  5. AnonymousJanuary 25, 2025 at 7:23 AM

    I had a top of the line Bernina Serger that converted to a coverstitch as well. It was in the shop and I needed a serger right away for a job I was doing so I bought a Juki serger under 500.00 dollars to have as my back up. The Juki serger is amazing! I have had it for several years and I love it. I sold the Bernina and bought a stand alone coverstitch machine. Haven't regretted it once. It's easy to clean and always forms great stitches. Cannot recommend any more highly.

    ReplyDelete
  6. AnonymousFebruary 7, 2025 at 6:50 PM

    What a beautiful dress and it fits you so well.

    ReplyDelete
  7. AnonymousFebruary 14, 2025 at 11:02 AM

    I have a Bernina. My original serger was an old, used, Pfaff which was difficult to use. I recommend going into shops and test driving to see what you like best. Modern sergers are easier to use than the old models from the 70's and 80's that I started on. If you buy from a good store, classes are included, and this can be well worth the extra money.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Falling for Knits

By
We are now well into Fall, even though the temps are still relatively warm here in Texas.  I love the fall season and dressing for Fall.   When it comes to the conversation of knits vs. wovens I typically sew mostly wovens. So for this post I decided to sew completely knits!  With the holiday season right around the corner I saw these three dress styles as perfect for Friendsgiving/Thanksgiving gatherings.  The first look is a tried and true pattern Simplicity S9372.  Using this gorgeous burgundy ponte knit , I like how this pattern fits throughout. I chose this color to add to my typically neutral palette in my closet.  I also wanted something I could wear to my sorority meetings and found this color perfect.  It's an easy sew with back fisheye darts  and invisible zipper to add to the tapered style.  The neckline and armholes are finished with bias binding giving it a clean finish on the inside.  I used a universal needle to sew a...
8 comments
Continue Reading »

Made By A Fabricista: Closing 2025 with a Lined Jacket

By
Hello again, sewing friends! It seems we have arrived yet again in the grandest season for layering, all this oncoming cold weather. I like ending the year with something warm and very useful. Seems based on my past Fabricista posts, I love to sew year-end outerwear, and this round is no different!  I challenged myself with a new lined coat (wait, jacket? Coat? I feel like the presence of wool changes things?). Anyhoo, since the lovely Chalk & Notch Den Jacket has been in my queue, I proceeded ahead. I like the large pockets, the option to line or not, and the extra bodice and sleeve seams for topstitching.  Sewing this coat is not at all difficult, but the many pieces and loads of topstitching will take a bit of time. My version took me a few multiple-hour sessions to complete. I sewed a size 2, which matches my measurements, and I made no alterations. Hint: for a quick size test, just employ the lining pieces.  Gorgeous, muted blue as a soft wool flannel ? This is ...
3 comments
Continue Reading »

Made By A Fabricista: Chalk and Notch Wren Dress: My Buffet dress for the Christmas season!

By
  I recently sewed the Chalk and Notch Wren dress using a beautifully soft black voile from Fabric Mart, and it turned into such a satisfying, enjoyable project. The pattern itself is very easy to understand and straightforward with clear instructions, intuitive construction, and a relaxed fit that makes the sewing process easy. A buffet dress in the sewing community is a dress that is loose fitting, so you can eat at the buffet without your dress being uncomfortable afterwards, lol! Because the voile I chose is extremely thin and transparent, I opted to line the bodice and first tier. Adding a lining not only provided modesty but also gave the delicate fabric a bit more stability, especially around the neckline and button placket. A helpful tip when sewing a lining into a lightweight bodice is to treat the lining and the main fabric as one. I sewed the bodice as you would for a lined bodice, and the first tier I sewed the pieces together with a basting stitch to make the process...
3 comments
Continue Reading »