Made By A Fabricista: Silky Prints for a Tropical Vacation

Hello again! I want to share with you my latest project using silky prints. My family had been planning to go to the Virgin Islands for a vacation. For this trip I wanted loose-fitting outfits.

When the summer Vogue patterns were released, I fell in love with the vintage Vogue V1886 caftan. It is ankle length and the sleeves fell elegantly to the hemline, hitting the arm slightly above the elbows. It has a scooped back, which would make it comfortable in hot weather. There are side panels, but no seams. I could wear this relaxing under an umbrella during the day or for an evening stroll to enjoy the breeze on the beach.

FM’s polyester lightweight charmeuse silky prints caught my eye. Even though I swore I would never again sew slippery fabrics, the coastal mountain print on the fabric (SKU UQA7666r) was hard to resist. The moonstone blue/berry pink/medium blue/taupe were cool relaxing colors.

While looking at the first fabric, I saw another silky print (SKU UQA7667r) that was hard to pass. The lapis blue/cream/red salsa/lemon medallion palm print was bold and the colors give a carefree retro vibe. They would look good against solid garment pieces. I decided this would be the right fabric for Vogue V1706, whose asymmetric overlay on the bias would tone down the circles and its wide legs would show off the softness of the fabric.

I prewashed the fabrics. As expected, they would slip off the cutting table and the ironing board even with pattern weights. They frayed much, too. I used almost a can of spray starch to stiffen them so I could control their movement.

I cut a medium size for the caftan and used French seam to minimize the fray. Still, threads would peek through the seams. I meticulously snipped them off. The sleeves were finished with narrow hem and the hemline were hemmed by hand. The pattern itself had 4 main pieces and was very easy to sew. Modifications: I omitted the buttonholes in the front to avoid disturbing the print. I also omitted the dart on each side panel; they were not necessary. I used a storebought bias binding to finish the front and back neckline.

The V1706 top and pants were also easy to sew. I cut size 14 for the top and size 16 for the pants. Because this fabric was a smidge thicker than the other one, serging the seams instead of employing French seam was enough to control the fray. Machine blind hem stitch finished the pants’ hem. Modification: I omitted the top’s back zipper because the neckline was wide enough for my head. I increased the armhole size.

Dare I say my outfits are unique! Lightweight charmeuse silky prints are not the easiest to sew, but the drape is awesome. My vacation feels luxurious already.

Til next time,

MARY ANN | @anasewperfect

Unfortunately Fabric Mart Fabrics sell out quickly!
You can find similar fabrics by shopping the following categories DESIGNER SILKY PRINTS & CHARMEUSE.

Made by a Fabricista: The Bernadette

Hello friends, My Latest Fabricista Make: Friday pattern Co Bernadette Skirt x Midnight Navy Cotton/Lycra Sateen Stretch Denim Hi everyone, this is Byrd with my latest Fabricista make! When I saw Fabric Mart’s Muted Midnight Navy Cotton/Lycra Sateen Stretch Denim , I knew it would be perfect for my next project. The color is rich and versatile—a deep navy that works as a neutral but still has presence. The stretch denim has just the right balance: structure with a bit of give, making it great for a garment that needs both shape and comfort. It’s an ideal fabric for fall transitions, but it’s sturdy enough to carry straight into winter with tights and boots. For the pattern, I chose the Bernadette Skirt by Friday Pattern Company . This is one of their newer designs, and I knew immediately I wanted to sew it up. It’s a modern skirt that blends structure and style, with darts in the back and pleats in the front for a flattering fit. One of my favorite features is the belt, and of co...

Made By A Fabricista: Falling for Knits

We are now well into Fall, even though the temps are still relatively warm here in Texas. I love the fall season and dressing for Fall. When it comes to the conversation of knits vs. wovens I typically sew mostly wovens. So for this post I decided to sew completely knits! With the holiday season right around the corner I saw these three dress styles as perfect for Friendsgiving/Thanksgiving gatherings. The first look is a tried and true pattern Simplicity S9372. Using this gorgeous burgundy ponte knit , I like how this pattern fits throughout. I chose this color to add to my typically neutral palette in my closet. I also wanted something I could wear to my sorority meetings and found this color perfect. It's an easy sew with back fisheye darts and invisible zipper to add to the tapered style. The neckline and armholes are finished with bias binding giving it a clean finish on the inside. I used a universal needle to sew a...

Made By A Fabricista: The Art of the Slow Make: My La Forme Double-Breasted Jacket

I started this project back in July — one of those mid-summer sewing plans meant to get me ahead for fall. My idea was simple: start my wardrobe a season (or two) early so that when cooler weather came, I’d already have a few handmade pieces ready to wear. That was the plan, anyway. But as sewing often reminds us, plans evolve. This jacket, made using La Forme pattern No. 0303, is a double-breasted design with peak lapels and an exaggerated hip detail that gives it such a striking silhouette. I fell in love with the structure of the pattern right away — it has that timeless, tailored feel I can never resist — but it also asked for patience. I picked it up and put it down several times over the months, letting it rest while I worked on other projects, until finally, the timing felt right to bring it to life. And now, here we are — the leaves are turning, there’s a chill in the air, and some parts of the country are even seeing snow. My summer-started jacket is finally finished, and it c...

Fabric Mart Fabricistas

Search This Blog