Skip to main content

Guest Post: Merrick from Merrick Art

Do you have a favorite sewing blog you follow?
Well here is ours: Merrick's Art. Merrick is an adorable mommy who has found ways to impress us everytime with the way she alters clothing. So when we chose to talk about making old pieces new on the blog this month, we NEEDED Merrick to guest blog! Here she is!

Hello!
I'm Merrick from Merrick's Art where I blog about sewing, style, and life. I'm excited to share a really fun refashion here today! 

Many months ago, I went thrift shopping and picked up this ginormous navy blouse.  I had no brillant refashioning plans, so it sat in my fabric box for many months until just recently I saw a navy peplum top and instantly knew that's what this top was destined for. 

With my 2013 goal to be a better seamstress, I really took my time on this project, making sure to think through each step, and I am thrilled with how it came out!




I didn't have a blue zipper, but this green one made for a fun pop of color -- now it's my favorite part of the top! 

top: thrifted/refashioned by me // jeans: american eagle // necklace: c/o wild about jewelry // shoes: old navy (in store only)

This isn't a difficult tutorial, but it does have a lot of steps. Just forge through!

Materials:
  • oversized blouse (these are a dime a dozen at the thrift store)
  • zipper (optional)
  • matching thread
  • seam ripper
  • elastic
  • measuring tape
STEP 1.  Using a seam ripper, remove the sleeves from the bodice. 


STEP 2 (Part 1). Measure from your shoulder to your natural waist, and then carefully cut your blouse to that length. Set aside the extra fabric from the bottom of the blouse -- this will become your peplum later on.

STEP 2 (Part 2). If your material isn't stretchy, you'll probably need to put a zipper in the back so you can get in and out of the shirt once it's slimmed down. Cut a straight line down the back of the shirt and insert a zipper. I used a 22" invisible zipper, and cut it down to be about 17" or so. You can make your zipper go all the way down the back -- I left about 3 inches at the bottom and just sewed that part closed.


Once your zipper is in, the back of your bodice should look like this:


STEP 3. Moving to the sleeves, pull the oversized sleeve (turned inside out) up your arm and mark with a pin how much you want to take it in. Make sure your seam curves to allow some movement at the armpit (as seen below). Sew with a straight seam along the dotted line, then trim off the extra fabric and zigzag or serge the raw edge to prevent fraying. 


Repeat on the other sleeve. They should now look like this: 

 

STEP 4. Going back to the bodice, turn it inside out and try it on. Mark with pins where you want to take it in (make sure your zipper is centered in the back).

Carefully remove the top and sew with a straight stitch along your marked lines. Trim off the extra fabric and zigzag or serge the raw edge to prevent fraying.


You should now have three pieces that look like this:


STEP 5.  Now it's time to attach the sleeves to the bodice. First, try on the bodice and measure how wide you want the shoulder width, then trim the arm holes. I cut mine down to 4 inches wide, as seen below.


Then, with right sides together, pin the sleeve to the bodice, as seen below. 


The arm hole on the bodice will probably be slightly larger than the arm hole on the sleeve -- this is normal. As you pin, distribute the extra fabric evenly between pins, and then as you sew, stretch the fabric as much as you can and you will be able to avoid tucks. 

Sew around the entire sleeve with a straight stitch, then trim off the extra fabric and serge or zigzag the raw edge.


Once your sleeve is attached, turn it right side out and press. The extra arm hole fabric, that I mentioned above, might create a little waviness, but it will iron right out as long as you don't have any tucks. 

Your shirt should now look like this (this is pre-ironed -- see the waviness?):


Repeat STEP 5 to attach the second sleeve.

STEP 6. Now let's move to the peplum. Take the bottom of the blouse that we cut off at the beginning and trim it down if necessary so it's completely even all the way across. (mine was 7" tall once it was trimmed).


STEP 7.  Measure the width of the bottom of your bodice (where your natural waist is), and cut 2 pieces of elastic in that length. Sew the ends of the two pieces of elastic together to make a big circle.


Pin the circle of elastic to your peplum (I pinned mine in four places, which you can see two photos down, and sewed in sections, pulling the elastic tight in between pins). Sew around the entire peplum, stretching the elastic as you sew (as seen below).


The bottom of the bodice and the top of the peplum should now have the same circumference measurement, and your peplum should look like this:


STEP 8. With right sides together, attach the peplum to the bodice. Using a straight stitch, sew next to the elastic (don't sew on the elastic!) as shown below with the dotted line.


Once the peplum is attached, use a seam ripper to remove the elastic (keeping it there just adds bulk to the waistline, which you don't want, obviously).


Once the elastic is removed, trim the seam allowance and zigzag or serge the raw edge to prevent fraying. I used all the original hems, so press all your seams and you're done!

Voila -- a peplum top! Look familiar?



Awesome, right?
Please visit Merricks Blog for more projects!


Are you going to try to make a peplum shirt?
I sure want to!

Happy Sewing!

Comments

  1. This is awesome! and super cute ~ thanks for the tut.

    ReplyDelete
  2. Super chulisimo .Gracias por enseñarnolo

    ReplyDelete
  3. nice idea. would plain gathering do instead of using the elastic?

    ReplyDelete
  4. Great tutorial, also, looking good on you. I believe many girls are going to try this outfit so that they can look pretty like you. My scene is different, I can't be like you, but I'm surely gonna try to make same like this. tutorial is very easy and I believe I'll not get stuck in the middle with anything. Thanks for sharing some great creativity.

    ReplyDelete
  5. In the past year I lost 60 pounds! This will be a great way to be able to wear the huge shirts I pulled out of my closet! I'm excited to give it a try.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: Milo + Citrine

Hello sewing friends! It’s Andrea - @happy.things.here on IG and today I’m on the blog to share some sew inspo on one of my favorite kinds of garments to make – cardigans! I absolutely love making them and wearing them year-round, whether it’s an extra layer for around my house in the winter, as my outermost layer in Spring and Fall, or paired with a dress on a cooler summer evening. I love love love cardigans! And there are so many great cardigan patterns out there – chances are that each of your favorite pattern companies offers multiple cardigan patterns. Button-less cardigans are great beginner patterns, and a handmade cardigan is a lovely personalized gift since it’s more forgiving for fit and you don’t have to know someone’s exact measurements to make one. And you can make them in all sorts of knit fabrics too.  Today I chose two cardigan patterns to share with you that I think bring a little something extra to the table. They are the Seamwork Milo and the Made by Rae Citrine.

Week 4: Jeansmaking- What They Made

This is it, the final round! And we certainly did not go easy on our three remaining contestants this time. This round they had to make their own pair of well fitting jeans. I think they all did an absolutely outstanding job! Take a look what these ladies accomplished & be sure to vote for your favorite! (Link at bottom of post.) And, don't forget to show us your me-made jeans on Facebook or Instagram. Details at the bottom of this post. Danesha from  Classyfied Life So first I must say that this entire challenge has been just that...a challenge! Two weeks ago there was hurricane Irma and I was blessed enough to not lose power and then I went out into the aftermath to capture some photos of my submission. Then two weeks ago I had a big trip planned so I had to do EVERYTHING  in two days . Then the BIGGEST challenge of all...THIS week! I got the challenge and I was super excited to have an extra few days and then before I could even get started I ended up in the eme

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month!  This year is the year I challenge my sewing skills.   I have wanted a moto jacket for some time.  Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one.  The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting.    Remember when I said I wanted to challenge my sewing skills?  😉 This fabric was beautiful but fragile to work with.  It was a great mental challenge that had me problem solving before sewing to avoid any potential problems.  I first traced out the pattern onto tissue paper to determine the fit.   I used scrap cotton fabric to sew up a “practice run” of the jacket.    I was pleasantly surprised at how easily the jacket comes together.   I sewed up the muslin in one evening.  It was time to cut into the beautifu