Made by a Fabricista: Spring Sweater Duster

I'm sew excited to become a Fabric Mart Fabricista! I love Fabric Mart's quality fabric and exceptional customer service. Last year I thoroughly enjoyed competing in Fabricista Fashion Challenge and I'm glad to be a back with Fabric Mart as a monthly guest blogger. To learn a little more about me (and to learn what frougie is) check out my blog TipStitched. Let's get on to the post, shall we?

I don't know about where you are, but here in the southeast Mother Nature can't seem to make up her mind. It can go from highs in the 50s to highs in the 80s in a matter of days. Even when the temps stay somewhat consistent for the week, I usually have to turn on the heat for my morning commute then the A/C for in the afternoon.

Dusters are the perfect layering piece for the sporadic weather of spring (and fall). The big 4 companies offer several duster patterns, and I'm sure indie patterns as well, but I decided on Simplicity 8059 because of its simple construction and lack of buttons (I hate sewing buttonholes-especially on knits).

I fell in love with this Mandala Print Hacci Sweater Knit as soon as I saw it on the site. I feel larger prints, like this one, work best with simply constructed garments where the scale of the print can shine. Once the fabric arrived I fell in love again as it has a great feel and had snappy stretch. This hacci knit has a tighter weave and slightly heavier weight than others I have seen and I like it.

Simplicity 8059 is a straightforward pattern. The duster sews up fairly quickly as it is 5 pattern pieces (front, back, sleeve, neck facing and front facings) plus interfacing. This hacci knit sewed up beautifully. There was some rolling up on the edges but nothing a few extra pins couldn't take care of. Due to the large scale of the print I did not put any effort into matching up the print at the side seams. I feel it is so busy (in a good way) that the seams don't stand out.

Interfacing is often a necessary evil. I should interface as soon as I cut the pattern pieces, but I always seem to wait until the I get to the step that requires the interfaced piece. Then I have to stop sewing to warm up my iron and interface. Don't be like me, interface first. Due to the weight of this knit (all 3 yards of it) I added clear elastic as a stabilizer to the shoulder seams.

Despite the simplicity of this duster, I did make a few changes. I didn't care for the elastic tab on the back so I omitted it. I chose to add belt loops and a matching belt in lieu of the tie ends as per the pattern. I felt the ties would drive me crazy when I wear the duster open where as I can tie the belt in the back to be out of my way.

To create the belt loops I cut the length of a scrap piece of fabric by 2" and folded each edge to the center and folded again and topstitched it closed. I pinned where I wanted the belt to hit on my waist and then sewed the belt loops to each side seam at the point.

For the belt itself I simply cut a strip of fabric the width of the fabric (58") by 3", this makes a 1" wide belt with 1/2' seam allowance. Next I folded the strip in half lengthwise right sides facing and sewed a 1/4" seam from the center to one end and then again about 1" away from the center point to the opposite end leaving a hole in the center for turning. I then turned the belt right side out and topstitched the 1" hole closed, because I was too lazy to slip stitch it. When I make this duster again I will keep the belt but increased the width to 2" (or a 5" strip).

The fabric is the perfect weight to cut the chill of the A/C in my office. I received several compliments throughout the day, so it's definitely an eye catcher. I am very pleased with the end result and I highly recommend this hacci knit and Simplicity 8059.

~ Tiffany

TipStitched

Made By A Fabricista: Basics vs Fun Clothes

Every summer I make flowy, pretty dresses because they are so fun for me to make, wear, and they keep me cool as temperatures rise. But when the days get shorter and autumn rolls around, I’m not always confident on how best to transition my summery dresses into garments that will allow for the seasonal changes. In an effort to be more intentional about maximizing the use of my clothing, I thought long and hard about what I wanted to make for August. It’s been a hot summer in New Jersey. From what I can see, it’s been a hot summer across the US. Looking for clothing that will keep me cool, perhaps hide some sweat stains, and allow me to transition between seasons, I decided to make separates that would pair well with each other and allow me to mix and match with the rest of my wardrobe. For the top, I wanted a basic tank top, something I could layer later on. For the bottoms, I wanted flowy, summery pants that can last into brisker weather or become phenomenally cozy in front of my wint...

Made By A Fabricista: From Paris with Love!

Bonjour! I am still in bliss from my recent trip to Paris!! It was much more than I expected and I absolutely fell in love with the city. I can honestly see myself living there one day. I knew before leaving I wanted to make something to fit into the Parisian landscape because I knew it would be a special opportunity. I was inspired by one of my favorite fashion creators Juliette Foxx. Her checked gingham corset and wide leg pants were on my list to remake. For fabric I used this red and white pin stripe denim twill and deep red sateen for the pants. The pattern I used for the corset was McCall’s #M8182 with a few modifications. The fit was a little large so I took it in along the sides and shoulder seam. I then lowered the neckline since the shoulders were taken in. I used the sateen as my lining which gave a great contrast. My pants are my unreleased pattern which happens to be exact from the inspiration. I drafted these last year and have been wo...

Made By A Fabricista: Sewing Summery ITY

Hi sewing friends! I’m dropping in to share a few makes sewn with ITY fabrics and inspire you to try out this slinky, cool-to-the-touch fabric for hot weather if you haven’t yet, or to recommend some patterns that work fabulously if you already love it. This is by far my favorite knit to wear in summer. Since it moves easily there’s lots of airflow, and it just skims the body. More often than not, it has a four-way stretch that doesn’t grow when worn, so it works great for loads of styles. ITY stands for Interlock Twist Yarn and the knit gives it some wonderful drape and stretch. There are lots of different weights and even some differing textures. Because it’s so fluid, the fabric really resists most wrinkling. I’ve sewn three different weights and prints here to show off just what ITY can do! This white floral is a lighter weight and features a slightly crepe-textured finish, and I think that combined with the large and spread-out floral makes it quite elegant and eye-cat...

Fabric Mart Fabricistas

Search This Blog