Skip to main content

Made by a Fabricista: Jalie 3350 and Sew Simple (Simplicity) A1046.

I knew I would be going to the Caribbean for my 15th wedding anniversary when I was asked what I wanted to do for my February make, so I told the wonderful folks at Fabric Mart that I really wanted to make a swimsuit (my first ever!) and an easy breezy dress.

Thankfully the store had both, this great olive green swimwear fabric (bottom half of my swimsuit), and a FOUR yard length of this cute printed rayon jersey (I have A LOT left over!).  There is none of this fabric left, but there are some other beautiful pre-cuts available here.

My swimsuit's top half is made from a fabric from my stash, but the olive green matches the leaves and vines perfectly!

As much as I love posing in summer outfits in the middle of February in front of my hall closet, I suspect I am going to love the photos and the posing way more in the Turks and Caicos.  I'll make sure to update the blog post with at least one image from the trip after we get back!

JALIE 3350:
To be honest with you all, I was a little terrified to start this project.  I have sewn plenty of knits, but there is something inherently daunting about a swimsuit, it needs so much elastic, applied just so, and well there's also the super negative ease.  Though I know how small swimsuits look before they get on the body (I am a former competitive swimmer as well as a current swim coach), but I still didn't believe that this would work for me.

Well thank goodness for Jalie.  Everything I have made from them has fit well, and like all my previous makes with them (all for this blog, too!), I chose to make a size S at the bust, a size T at the waist, and then grade out from a U to a V at the hips/bottom.  It fits exactly right, though I still wish there was some way I could make this swimsuit magically turn me from a pear into either a rectangle or an hourglass.  LOL.  I'll live, though, I've had years to get used to my body.  ;-)

The color is a bit off here, but this is the suit before it went on me.  It looks so much like my other suits, so I was super stoked!  I even lined it throughout (this black lining is also a Fabric Mart find).  Jalie doesn't ask that we line the back, but I swim enough that I want my suit to wear as long as possible.  I do feel like this one will last for a while, but I always remember to rinse my suits in cold water and hang them to dry.  No, I never wash in a machine or place them in a dryer, that will kill a suit so fast!

Here is my suit in its early stages of construction.  One thing I will note is that I serged the back bottom pieces and then folded the serged seam to one side and all the seams that intersected it help keep it down.  The last thing I need is that seam to split.  AGH, NO!  I would've likely figured that out, but the Craftsy class on constructing a swimsuit mentioned that and I was determined to remember that the most.  LOL.  No whoopsie moments for me this trip or this summer!

I found the process of applying the elastic (stretching to fit where needed--I used a clear elastic) and then folding over and topstitching oddly satisfying.  It was fun.  I used a 3.5/3.5 width/length zigzag stitch which was perfect for the construction of all these seams.  All the seams made this way held up, even when stretching to fit over my body!  The suits I own from J. Crew, etc., are made this way, too, btw.

Here's a look at my suit, inside out.  The back seam there is ready to never come apart!  :-)

Where it looks like the seam is folding in on itself (there at the lower back), it's okay because that area of my back is enough bigger than that, so on my body it stretches and sits nice and flat.

Oh, the dreaded back view.  Sigh.

Anyhow, the back closure is a bit of a miss.  I placed the closure in backwards (the open part should face down), and I didn't finish off the loop properly, so getting it closed is a bit of a bear, but I plan to fix the loop (hand sew it flat so it's easier to slip on and off).  The open part being up isn't that big of a deal, so I'll just leave it.

I like the way this suit is designed.  The open back and closure is so pretty, and I really am thrilled it turned out exactly (well, nearly) like the Jalie line drawings and photos.

BTW, the Jalie blog has a whole sewalong (that is just the first of six) on the style I made, and let me tell you, it is a great read for any kind of swimsuit make, and most excellent for those of us making this exact garment!

The straps are really long on me.  I needed to shorten them by an inch, and then I still have a bit of ease that may need to be corrected as the suit ages and stretches out.

I always prefer my side view to my back view.  (Don't we all?)  The most wonderful thing, in my opinion, is how the leg openings are not so low as to be a boy short level (which is NO BUENO for my saddlebags), but is not so high as to be indecent.  Very nice drafting on the part of Jalie!

SEW SIMPLE A1046:
So this dress!  I love how it turned out, but upon initially completing it, I was presented with a pretty, easy breezy dress that was JUST massive on me.  I sewed up the size 10 on top and the 12 in the waist and hips, but the combo of the heavier (very nice quality) rayon jersey and the ease being too much (I think the package garment measurements lied or I really do prefer negative ease in rayon jersey garments), I had to significantly alter the sides of the garment to get it to be more fitted.  It worked, and while bigger than other jersey dresses I own, it's fine and it fits.  I love the length, and I think the shape is one that works well on my pear shaped frame.

Here is the package.  It's 97 cents at Wal-Mart!  Yeah!  I did alter it (beyond the significant reduction of ease) by shortening the length to knee length (it is about 29 inches from the empire seam), and by taking the sash and instead of folding and twisting, sewing it up and attaching it more as a waist sash/belt.  I have a short torso, and I think it helps lengthen me a bit through there.

I added pockets, but the ones I took from another pattern were too long, so I had to stitch them at the top part so they would stayed fixed and wouldn't be too cumbersome.  Next time I make this, I will definitely choose with more care!

I definitely think I need to shorten the back bodice a bit, clearly you can see the puddling of fabric there.  I believe a swayback adjustment would work here well.  Next time!

Here's evidence I should do a sway back!  When I lifted my arms and straightened my back, it fit great!  (Thanks to my husband for this dynamite shot, btw!  Ha!)

Side view shows how nicely this fabric drapes.  It is seriously soft, flowy, and very easy to wear.  I think I should make PJs from the rest (and probably still have enough left over for a skirt for my daughter!).

I want to note that I am nearly uncomfortable showing off this much of my neck and chest.  If I ever want to wear this to school, I absolutely POSITIVELY have to wear it with a camisole in a matching color (I have light blue and black, so it'll work).

Cannot wait to wear this one for real, and very soon!

Until the next time, I hope all of you are well, and I hope you all have a love-filled and happy February!

Dina~My Superfluities.

Comments

  1. Omg I love them both! That swimsuit is perfect. Coverage but not fully covered. And the back view is great!!!

    I get when you're uncomfortable, you're uncomfortable. But that neckline on the dress is so perfect.

    ReplyDelete
  2. So Cute! Beautiful work and you look fabulous. Happy vacation

    ReplyDelete
  3. Thank you for the swimsuit review! It's so helpful to see them on real bodies!

    ReplyDelete
  4. Your review is very helpful. Thank you for the back view. You've given me the confidence to try it myself.

    ReplyDelete
  5. I just got this pattern. I love what you did to the front band. I'll do that too.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Back In The Saddle

If you don’t know in October my beloved Bernina sewing machine blew a fuse and started smoking while I was using it. She went to the shop for repairs, and then I moved. So it’s been a bit since I’ve sewed last and I’ve had trouble getting back into it. I knew I needed a simpler project to get me going again. Julie sewed up a Jarrah sweater recently ( restock coming soon! ) and gushed about how simple and rewarding a project it was. Then we got in this beautiful wool/cashmere sweater knit from England. I was seeing lighthouse keeper, sheep herder in the highlands. I knew it had to be my Jarrah sweater. I did lengthen the bodice by 3 inches. I actually sewed up a mock up with the curved hemline, but decided that wasn’t for me and went with the straight hem. Of course I took zero photos of said mock up.  Oops. Otherwise I sewed it up in a size 6 as is. Using the serger this really does sew up quickly. The dropped shoulder creates clean, simple lines that make it easy to sew u...

Made By A Fabricista: Simplicity 8847

Hi everyone, this is Byrd with my latest Fabricista make!  Is it too early to start thinking about Valentine’s Day? Because this fabric is giving all the heart vibes. With rich red hearts scattered across a dark base, it feels festive without being over-the-top—and completely wearable well beyond February. This time around, the fabric completely stole the show. I used a Dark Navy/Crimson/White Polyester/Lycra Hearts Print Brushed Sweater Knit by a NY Designer , and it was love at first sight. Even though it’s labeled navy, in person it reads more like a deep black base with these beautiful red hearts throughout. When you zoom in, you’ll also spot the designer’s name and a tiny smiley face woven into the print - such a fun, unexpected detail. This fabric immediately spoke my name when I saw it online, and it absolutely lived up to the hype. Before sewing, let’s talk fabric care and prep - because it matters. This sweater knit is wash and dry friendly, which makes it practical for e...

Made By A Fabricista: From My Imagination to My Closet

One of my favorite parts of sewing is taking an idea that exists only in my head and turning it into something I can actually wear. This project was exactly that—a quick, intuitive exercise in imagination, experimentation, and trusting my process, brought to life with Fabric Mart’s sweatshirt fleece. I started with a loose concept rather than a fixed plan. I knew I wanted something comfortable, but still fashion-forward—elevated loungewear that felt intentional rather than basic. Fabric choice was key, and Fabric Mart’s sweatshirt fleece ended up being the perfect foundation. Working with Fabric Mart Sweatshirt Fleece This fleece was an absolute dream to work with. It has a slight stretch, which made the final outfit incredibly comfortable while still maintaining structure. After pre-washing, the fabric held up beautifully with no pilling or texture issues, which is always a big win. It sewed smoothly and handled like a fabric that wants to be worn, not babied. Safe to say, I’m offici...