Skip to main content

Skirts Challenge Inspiration: Denim Flounce a little extra...


I hope you are well. This month for the Skirts Challenge (#sewcoolskirts), I wanted to do a ruffle/flounce skirt.

On a whim, I picked up Vogue V1450, because I saw beauty in the skirt design (View B).  You almost miss how great the skirt is, if you focus too much on View A, the sleeveless top, on the pattern cover. I think it is a bit overwhelming paired with the skirt (just my opinion). This skirt turned out to be such a fun skirt!  

To make the skirt, I used this wonderful striped stretch denim from Fabric Mart (click here).  This fabric is a dream to sew and wear. It is a combination of cotton and lycra with 10% stretch.

So let’s get into a few details on this DIY look!

I must say, there is not too much to say about the construction of this skirt.  The pattern is labeled as very easy and I have to tell you, it is extremely easy to make.  I think any beginner would find joy in making this skirt, especially if you take the route I took and not line the skirt.  The pattern is designed for a lined skirt, but I hardly ever see the need to line denim.

It took four pattern pieces to make this skirt. The front and back pieces are cut on the fold; and I cut one front and one back flounce piece.  Since I did not line my skirt, I self-drafted front and back facings.  After stitching the darts on the front and back pieces, I traced around the top edge of the two pieces and down 3-inches on each side to create the shape for the facings. Once I had the shape traced out, I added 5/8 inch seam allowance on each side.

This skirt has a side invisible zipper.  I am not a fan of side zippers and I usually move them to the back; however, I didn't want to fuss with moving it this time.

I focused on trying to keep my stripes matched as much as possible in the front and back, but when it came to the flounce and its curves and angles, I had to let the "stripes" fall where they may.  This gave the skirt more interest.

When hemming a skirt with curves like this, I normally baste around the skirt at the hem line, then fold and press the hem along the stitch.  It saves time and makes things much easier.  I top-stitched my hem with jeans top-stitching thread.

I had more fabric than I expected and since I was enjoying sewing with it so much I made a top with the leftover.  I used New Look 6512, and ahhh, this pattern is on my list of favorites.  Seriously, I could make this top for every day of the week, the pattern is just that lovely.  I have been searching for a pattern like this for awhile.  I love that it does not have the elastic around the front and back, but that it is mostly around the shoulders only.  The weight of this denim is light enough to make this top.  Now I wasn’t 100% sure that I was making the top to go along with the skirt, but I figured why not take pics in both pieces together just to see what it looks like.

Now the placket and buttons in the front are for beauty only, they are not functional.  I used jeans top-stitching thread along side the placket.  I love the color of the buttons with this denim!  I played around with the direction of the stripes to give the top more interest.

I hemmed the sleeves and the top with a narrow hem.  The elastic casing is made by stitching at 1/2-inch from the edge, and then 1-inch from the edge.  Three elastic strips are inserted in the casings on each side.

I serged my insides!

I styled the top with my new favorite pair of RTW white pants, that I also wish I could wear everyday (do you know how hard it is to find a great pair of white pants, lol?)  This hat makes me feel like I am on vacation.

I hope you enjoyed these two DIYs! Until next time take care!

Yours truly, Tee

Share your me-made skirts thru May 31st and be entered to win a $50 gift certificate to Fabric Mart! Share on Facebook or Instagram using #sewcoolskirts. 


  1. Very cute, Tee!
    And you made it clear that the pieces are pretty versatile. Nice work!

    1. Thanks Tasha! Yes, so many styling possibilities.

  2. Love that skirt and top. The denim fabric really makes both pieces a standout.

    1. Thanks Robin! Really a fun twist on denim!

  3. I love these two pieces together! They are amazing and I love the denim choice!

    1. Thank you Carolyn! I thought it may look too overwhelming together, but I like it ��

  4. These pieces are awesome... I think I have both patterns...I must add them to my summer sewing:)

    1. Thanks Lora! Yes great summer projects!

  5. I think you are right about the V1450 top with the skirt. Too structured and boxy for that lovely skirt. On the skirt, do you think it could be successfully lengthened, maybe under the darts? I have two foot long scares on my left knee and don't want to call attention to it, but this skirt is beautiful. Love the use of denium - great fabric choice!

    1. Thanks Meg! Yes, I think it would be easy to lengthen the skirt under the darts. I would probably slice the pattern a little under the dart lines and insert paper according to the length you desire. Then re-attach/tape the curvy bottom of the pattern back on the paper. Keep in mind that one side is a lot longer than the other side once you add the flounce pieces, so be sure not to lengthen it too much. Then fit the sides to skim your figure the way you prefer. I think this skirt would look super cute in a longer length too!

  6. I love the top especially!!!! Super cute outfits and a great fabric!

    1. Thanks KS! It feels great when projects turn out better than you expected!

  7. wow, VERY nice! I wasn't sure I liked the skirt at first, but the more I looked at how the stripes went the more I did. And THEN, you showed the skirt and top together, what a great outfit!!! love the detail on the back of the top. GREAT job.


Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

DIY Tutorial: Infinity Scarves

Have a person on your gift list, but have no idea what to get for them? Making a gift is the perfect idea and it will be even more thoughtful than a silly little gift they don't really want anyway.
Infinity scarves are super easy and quick to make. They are called infinity scarves because they look like a continuous piece of fabric in a tubular form. You can make them in almost any type of knit. Knits come in so many different prints that you can make one for every outfit in your closet. 
Here is what you will need:  - Sewing machine - 1/2 yard of knit fabric (sweater knit, rayon knit, ITY knit, cotton knit, etc) Should also be 58/60" wide.  - Thread to match - Hand sewing needle
1) Fold the 1/2 yard piece of knit in half the long way. Pin along the entire long edge. 

2) Using a thin zig-zag stitch (almost straight stitch), stitch the long edge. I pull slightly on the front and back of the fabric as it goes through the sewing machine so that when the scarf is finished, it can b…

Made by a Fabricista: Classic Ponte Knit Pieces!

Happy Saturday All!
I am so over this heat here in South Florida!  The humidity and the high temperature feels like 100+ degrees each day.  I can't wait for Fall so that I can truly enjoy the cooler temperatures.
Whenever Fabric Mart has designer ponte knit fabric in stock and on sale, I grab as many yards as I am allowed to.  I absolutely love sewing with ponte knit versus other knits as the stability and structure are perfect for my personal taste (See my previous Fabric Mart post using ponte knit here and here).