Skip to main content

Made By A Fabricista: My New Favorite Fall Wool Coat

Hi- 

Hope all is well!  Well it’s that time of year again...fall wardrobe time!  Or shall I say “sewing up” your fall wardrobe time?  I have been busy sewing up as much as I can, before I miss out on the cooler temperatures coming our way in Las Vegas.  One "to sew" item on my list is a coat; therefore, when I saw this canary yellow wool melton coating (although I refer to this as "mustard-colored") from Fabric Mart, I jumped at the opportunity to get some of it.  Right away, I knew I wanted to make Simplicity 8469.  I like a few views of this pattern, but with this fabric I chose to make View A. I must say this is a relatively easy coat pattern to sew and I enjoyed making it.


This is my first time sewing with wool melton and the texture reminds me of felt.  I wasn’t sure how to pre-treat this fabric, so initially, I pressed and gave it a good steam.  As I was doing this, a lot of lint was coming off the fabric.



Then it occurred to me that if I put the fabric in the dryer on low to medium heat, perhaps I could get more lint to come off.  So I hung my fabric up and evenly sprayed it with water and threw it in the dryer with a couple of my lavender dryer sheets.  There was quite a bit of lint in the lint trap, but the fabric came out beautifully.  I read online that this fabric will continue to develop lint balls for awhile, but with more wear the amount of lint will decrease overtime.  In the meantime, I will just keep a lint shaver handy.



To sew this I used a size 80 or 90 universal needle and I switched to a size 60 or 70 microtex needle to sew my lining, because the lining fabric was a bit fragile.  Initially, I was going to use a neutral colored lining that I found in my stash.  Before pre-treating the lining, I cut the pocket lining out, so I could continue working while the lining was in the washing machine. 

 

Unfortunately, the rest of the neutral lining was ruined in the washing machine.  It developed some sort of stain pattern throughout that was very noticeable in person.  It may have been damaged by the detergent or it may have been a dry clean only fabric.  I think it was given to me, so I can’t say for certain what the proper care instructions should have been.  Therefore, I put my coat project on hold until I could figure out what lining to go with.  After thinking, thinking, and more thinking...one night as I was falling asleep, it’s like a voice in my head screamed LEOPARD PRINT!!!  Of course, this was the best way to go!  



The great news is I had about 4 to 5 yards of leopard print fabric that I picked up a few years ago.  I was never able to decide what I wanted to make with it.  I am a leopard print fanatic, seriously! I have so many items in leopard print, right down to my Snuggie!  So this fabric was special to me and I was saving it for just the right thing!  




Now I must say after sewing with this leopard print fabric, I feel that it is best suited for lining, but it didn’t stop me from making a quick blouse with the leftover.  I made it with Simplicity 8216, View C, which is a pattern I won’t make again, but it really did work for this look!  Go check out my blog to see the blouse without the coat on and read about my little mishap, that turned out okay.

While getting sewing tips for wool melton, I came across a tip that said you really don’t need to use interfacing with this fabric, because of its weight and stability.  I was a little skeptical, so I asked a sewing veteran, Carolyn from Diary of a Sewing Fanatic, for a little advice while chatting on Instagram DM.  She said that I should use interfacing in my facing or it would collapse, she recommended woven interfacing, silk organza, or cotton batiste/twill.  I went to my local fabric store and found a “cotton organdy” which I thought seemed similar to her suggestions after discussing with a couple of the ladies in the store.  It was my first time using sew-in interfacing and I am ADDICTED to using it for jacket/blazer/coat facings.  I have already used sew-in interfacing again in a blazer project that I completed.  I love not getting the shrinkage and bubbling from the fusible interfacing that I use normally.  I was confident that my local fabric store would carry the silk organza interfacing that Carolyn suggested, so I stalled on ordering it for this coat.  However, I still want to order some to have on hand for the next great fabric.




I used magnetic snaps for the closures and these snaps are so great, because they just "automatically" snap into place.  They are also very easy to un-snap to allow the coat to be worn open.  Most of the times I like to wear my coat open, unless it is really cold outside.





I have mentioned on my Instastories that I don’t split, open up, or trim down darts even if they are big, BUT this fabric was so thick that it was necessary for me to split the darts open on this coat.  (Okay pardon my lighting in some of these pictures coming up below, but hopefully you are able to see the details.)



I had a little fun with top stitching, which actually served two purposes...1) to keep the bulky seams in place and 2) to add a little extra detail to the design.







For the sleeve, I wanted to double-over the wool fabric to make the bell portion, but I did not have enough fabric to do it.  I wasn’t interested in lining it per the instructions, so I cut them as single pieces and finished it with neutral bias tape.




I want to make this coat again, but in View C.  It would be amazing to have the cap sleeve version of this coat to wear with long sleeve shirts and turtlenecks for a cool fall evening.

Well, that's all I have for this post, until next time take care. Don't forget to check out my blog for more details on the blouse!


Yours truly, Tee

Maggie Elaine Blog


Comments

  1. Stunning---and the leopard lining is fantastic.

    ReplyDelete
    Replies
    1. Thank you 365!!! I am so glad it worked out after my initial didn't.

      Delete
  2. Love the lining! Beautiful coat. You did an excellent job!!

    ReplyDelete
    Replies
    1. Thank you Anon! This was a really fun coat to make!

      Delete
  3. This was a great review and a lovely coat. Thank you for all the tips I purchased this fabric and I'm excited to use it.

    ReplyDelete
    Replies
    1. Thank you Morgan! I hope you enjoy your make with it

      Delete
  4. So adorable, and wearable! Great work with the top stitching!

    ReplyDelete
  5. I love the coat and the lining sets it off. The detail is beautiful, yet simple. I'm such a animal print person this is right up my alley.

    ReplyDelete
  6. Taaaa Daaaaa!!!!! Beautiful You.

    ReplyDelete
  7. One word needed to describe your coat.....Beautiful!

    ReplyDelete
  8. I love this coat on you, which says alot because I did not care for it on pattern envelope. I also love this coal wool and agree it leans more to mustard than canary.

    ReplyDelete
    Replies
    1. Thank you! I agree, the pattern cover with the orange coat and bigger sleeves didn't win me over at all. Luckily, I saw the two views in the smaller illustrations before I passed on it. Those won me over.

      Delete
  9. Very pretty coat Maggie and you did an awesome job. I’m getting ready to make my version too and will definitely use your tips.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Bold Aspen Dress for Spring

 As I write this in mid-April, central New Jersey weather is showing small signs of spring. My neighbor’s daffodils are blooming and our magnolia tree is trying to unfold its vibrant magenta petals. I am in the midst of preparing my wardrobe for the warmer months, even if we are still huddling against windy 30 degree days. For me, warm weather means linen. I love breathable, floaty linen sundresses and drapey, loose linen wide-leg pants. My vision for a spring piece was something bold and bright, inspired by the natural colors of blooming flowers, but also something that could transition well between the warmer and cooler months. When I saw Fabric Godmother’s Apsen Dress, I knew that it had the sensible transitional opportunities I was looking for while also providing a blank canvas for fun prints, patterns and colors. With the pattern in mind, I then turned to the stunning linen collection that Fabric Mart always has on hand to see what colors or patterns would best suit my visio...

Made By A Fabricista: Celebrating warm weather with Spring sewing!

Hi sewing friends! I don’t know about you but boy, was winter cold and dreary this year! The weather here in the Philadelphia area has been slowly improving, but Spring sure did take her sweet old time to arrive. So by April, I was definitely in the headspace of needing to sew up things that were either bright and cheery or meant for the warmer weather I am very much craving right now. I recently purchased a few SewBexx Patterns so I took them on a test run to create some Spring makes. First on my list was to make a top using this absolutely gorgeous ITY fabric I picked up last year. I had two yards which was enough for a long sleeve shirt. I chose the Olivia top, which is oversized with a drop shoulder, has multiple lengths and a split hem. I think the pattern is intended for heavier fabrics but I was envisioning how lovely this top would look with the drape of ITY knit fabric, and it did not disappoint. It came together for me quickly and was a straight forward sew…and I love the br...

Made By A Fabricista: Stripes For Spring

Hi everyone!   It’s finally warming up here in southeastern Pennsylvania and I wanted to make a light, flowy dress for springtime. I snagged a vintage Laura Ashley pattern from Joanns on one of my last trips there. I somehow didn’t have anything in my pattern stash with a sweetheart neckline, so I thought it would be a good addition. The pattern calls for a giant gathered skirt, so I knew I would need something lightweight and drapey for it.  Something like a pink striped cotton fine seersucker. The fabric is light and has a really nice drape, almost like a challis . I knew it would gather beautifully. I  got to work cutting everything out, with help from my assistant. When I say the skirt is massive I mean it.  I ran into an issue right away where my fabric isn't wide enough to cut the back panel without opening the fabric out. And my three yards of fabric wasn’t enough to cut two back panels. I ran into this issue last year when making my pinafore dress . In ...