Skip to main content

Made by a Fabricista: My First Lined Jacket

“To overcome fear, here’s all you have to do: realize the fear is there, and do the action you fear anyway.” 
- Peter McWilliams
Happy Monday All,


I am so happy I finally made a fully lined garment.  One of my sewing goals for 2019, is to create a lined jacket.  I kept procrastinating for the past few months due to fear.  I literally made every single excuse in the book not to tackle the project and even rescheduled my November post.  I then realized fear was holding me back and all I needed to go was give it a try.


The fabric I chose for the project is a beautiful crimson red jacquard metallic fabric here which has a raised pattern design and would work for the basic jacket pattern I had in mind. 
 I honestly did not do my research prior and realized that this particular fabric had to be lined even if I decided not to create a jacket based on the fabric texture.  I did not want to feel defeated and went straight to work after I found the perfect polyester lining fabric in my stash.
I used McCalls M7730 View B, a jacket pattern with no lapel as I wanted to master lining first.  After reading the instructions, I realized that you are basically creating two of the same garment except for a few changes to the sleeves.  
I opted not to construct any of the sleeve variations for this pattern and changed the sleeve length to a basic long sleeve jacket.
My original plan was to taper slightly the short sleeve pattern which was an epic fail. I then looked at a pattern that was similar and used the sleeves of New Look 6514, a duster I made before here
I checked to see if the sleeves cap length were both the same.  Luckily, the patterns were identical and the notches even lined up.   
Can you believe I attached 2 wrong sleeves, one short one long :-(!!! I was so excited after attaching the lining to the main and didn't even realize that one of the short sleeve was attached to the lining.  For some reason, I just kept on sewing late that night even though I was exhausted and picked up the wrong sleeve length without noticing.  I even hung it on my dress form under the main in the dark.  It was after I attached the lining, tried it on I realized the mistake I made when I turned it inside out. Has this ever happened to you?  (Feel free to share below.)

Lesson Learned: Do not sew when you are TIRED. You may end up using the seam ripper a few times. The next morning, I got up extra early and attached the correct sleeve and finished the jacket.  I was so happy and couldn't wait to style and shoot.
Added a light to medium weight interface for stability.


Here are some tips that I have learned from other experienced sewists:
1. Trim the seams when add lining to a garment to reduce bulk. Clip corners if need be.  
2. When in doubt, add stabilizer or interface to areas that need support.  I opted to add interface (not mentioned in the pattern instruction) around the neck area and the front opening of the jacket for stability and it worked out just perfect.
3. Use a lining that matches the MAIN fabric or compliments the color if the jacket does not have facing.  
4. Size up for a fitted jacket especially when in doubt.  This fabric has NO stretch and I wish I had cut a size 14 instead of a 12 for this particular style.
5. Stitch in the ditch at the shoulder seams to hold the lining in place.
I am absolutely proud of this make and plan to rock this jacket to a business event with a pencil skirt or loose bodycon dress.  Have you accomplished your sewing goals for 2019? I still have to make a coat that may be delayed until 2020 as I have a few winter cardigans and sweaters to make before the end of the year.

 As we celebrate Thanksgiving this week, I would like to take a moment to thank you all for following and supporting my journey over the past 2 years. My monthly Fabric Mart post has allowed me to step out of my comfort zone and become more confident in my sewing abilities.  I am super excited about 2020 now that I have overcome some of my greatest fears in 2019.  Moreover, I am grateful for the sewing community who inspires me daily to just cut the fabric.  Your kind words and comments you all share do not go unnoticed. 
 I am target focus for 2020 and will be sharing my sewing plans next month.  Also, don't forget to stop by my Instagram page to check out my latest makes.

Wishing you a wonderful  Thanksgiving with your loved ones!

Comments

  1. I want to make one now! You look so beautiful and the fit is amazing!

    ReplyDelete
  2. You are a beautiful young woman and your jacket is awesome! Congratulations on your finish and accomplishing your goal. Wishing you all the best for 2020 and your sewing goals. Take care, sweet girl, and have fun!!
    Bobbie from Bemidji, MN
    P.S. Just so you know, I am a grandmother (76 YO) and love seeing young people going about their lives.

    ReplyDelete
    Replies
    1. Awww thanks a lot Bobbie! Appreciate those kind words!

      Delete
  3. I fully agree about the not sewing when you are tired. A couple of years ago I had a pants for work that I was working on, and sewed the wrong pants together at the side seam. So I took it apart, and thought I grabbed the correct piece, and ended up with the same issue: wrong pieces together.... Needless to say, I quit for the evening with that.
    In sewing a purse over the past couple of weeks, I put a zipper pocket in, and put the wrong side of the fabric to the inside of the pocket, but I figured since it was zippered anyways and I had already cut the opening, I was not going to change it. But I did stop for the evening once I realized.
    For me, tiredness, frustration, or the mind not being in the sewing are all times that I tell myself it is better to just let the sewing be and go into another room.

    ReplyDelete
  4. Congrats!! I saw your IG post about the sleeves. I've so been there. Glad you persevered!

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: Milo + Citrine

Hello sewing friends! It’s Andrea - @happy.things.here on IG and today I’m on the blog to share some sew inspo on one of my favorite kinds of garments to make – cardigans! I absolutely love making them and wearing them year-round, whether it’s an extra layer for around my house in the winter, as my outermost layer in Spring and Fall, or paired with a dress on a cooler summer evening. I love love love cardigans! And there are so many great cardigan patterns out there – chances are that each of your favorite pattern companies offers multiple cardigan patterns. Button-less cardigans are great beginner patterns, and a handmade cardigan is a lovely personalized gift since it’s more forgiving for fit and you don’t have to know someone’s exact measurements to make one. And you can make them in all sorts of knit fabrics too.  Today I chose two cardigan patterns to share with you that I think bring a little something extra to the table. They are the Seamwork Milo and the Made by Rae Citrine.

Week 4: Jeansmaking- What They Made

This is it, the final round! And we certainly did not go easy on our three remaining contestants this time. This round they had to make their own pair of well fitting jeans. I think they all did an absolutely outstanding job! Take a look what these ladies accomplished & be sure to vote for your favorite! (Link at bottom of post.) And, don't forget to show us your me-made jeans on Facebook or Instagram. Details at the bottom of this post. Danesha from  Classyfied Life So first I must say that this entire challenge has been just that...a challenge! Two weeks ago there was hurricane Irma and I was blessed enough to not lose power and then I went out into the aftermath to capture some photos of my submission. Then two weeks ago I had a big trip planned so I had to do EVERYTHING  in two days . Then the BIGGEST challenge of all...THIS week! I got the challenge and I was super excited to have an extra few days and then before I could even get started I ended up in the eme

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month!  This year is the year I challenge my sewing skills.   I have wanted a moto jacket for some time.  Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one.  The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting.    Remember when I said I wanted to challenge my sewing skills?  😉 This fabric was beautiful but fragile to work with.  It was a great mental challenge that had me problem solving before sewing to avoid any potential problems.  I first traced out the pattern onto tissue paper to determine the fit.   I used scrap cotton fabric to sew up a “practice run” of the jacket.    I was pleasantly surprised at how easily the jacket comes together.   I sewed up the muslin in one evening.  It was time to cut into the beautifu