Skip to main content

Made by a Fabricista: Autumn Transitional Dress and Cardis

Hello Fabric Mart friends!

So nice to say hey again!  Just want to take this opportunity to wish my awesome, sweet and amazing firstborn a Happy 5th Birthday this week.  It's hard to believe he's already FIVE!

Like many folks I've been spending a lot of time at home this Summer, which has translated into lots of sewing.  I've often had a thoughts about sewing for the upcoming season to get maximum wear out of garments, but often seem to be playing catch up for the current season.  But not this time:  here are my first transitional pieces for Autumn, entirely inspired by the wonderful sweater knits I kept spying at Fabric Mart.


First up is the cardigan:  Helen's Closet Blackwood Cardigan


This is the third Blackwood I've made, but the first of the shorter iteration (view B).  It makes me want to sew up a 3/4 sleeve cropped version!


The fabric is a delightfully mottled abstract blot poly/lycra sweater knit.  Unfortunately, it's sold out at the site now but you can find many alternatives here.  I was really pleased with how this washed up and can see this piece as a staple in my wardrobe for seasons to come.


I made a size 12 which is consistent with my measurements on the size chart and I'm pleased with the relaxed fitting results. The only alteration I made was to shorten the sleeves 3".  They are purposely long in this pattern and designed to scrunch around the wrist, but I like a little less play in my cardigan sleeves.


Secondly is the shrug:  Jalie 3246


It's not a secret, I love all things Jalie.  I've made two of the maxi tank dresses from this pattern this Summer and knew I wanted to try the shrug next.  I was not disappointed:  this shrug was a SUPER FAST SEW.  I'm talking half an hour here.  There will be more!


My usual Jalie bodice size is a V, so that's what I used for this garment.  It feels a tad large and baggy across the back, which is certainly a function of stretch of this sweater knit as well as sizing, so I will make sure in future iterations to either use a less stretchy knit or a size U.


I used a wonderful brushed rayon/poly/Lycra sweater knit, which is unfortunately sold out.  Again, you can find similar options here.  I tend to prewash my fabrics one step harder than I plan to launder them in the end and this produced a bit of pilling in this fabric.  It's not too bad now, but I worry how it will fare as time and laundering goes on.


As it is, I love the ballet-esque look this marriage of fabric and pattern produce.

Last but not least, the dress:   McCall's 7561 


This is my second time making this dress, which is a sleeveless view B.  The first go I made a straight medium, which fit alright but was a bit loose in the shoulder area.  So for this one I used the small for the shoulder and armscye and a medium everywhere else.  I'm pretty pleased with the results, but might do more of a small/medium blend in the shoulder, etc. next time.  I also lengthened the skirt about 1 1/2".


This pattern calls for turning and stitching the neck and arm edges, which I hate as a seam finish.  It doesn't work well at all if your knit doesn't stretch both ways and it often gets sloppy and stretched out looking over time. So, I decided to line with a cotton lycra jersey from my stash and use the "burrito" method instead!


How to Burrito your sleeveless bodice:


NECKLINE
1.  Sew shoulders together
2.  Place garment and lining right sides together and stitch neckline
3.  Turn right side out and press



ARMSCYE
4.  Roll one edge of sleeve up to the other edge
5.  Bring garment and lining armscye right sides together, casing the roll in between
6.  Sew armsyce, taking care not to catch roll in your seam
7.  Turn right side out
8.  Repeat 4-7 for the other armscye



SIDE SEAM
9.  Lay side seams of front and back out flat
10.  Match front and back side seams together, taking care not to twist and matching garment side to garment side and lining to lining
11.  Stitch along the entirety of this seam from garment to lining
12.  Repeat 9 to 11 for other side of bodice

The fabric is this jacquard eyelet-look double knit (it also comes in this awesome teal!).  This pattern calls for a jersey, but I knew with how wonderfully stretchy this was, it would work out.  Being polyester, it's not the coolest selection for a Summer dress (thus the Autumn transition thought), but I really love how it turned out.



As designed, this pattern is a dirndl (gathered) skirt, but to work with the stiff drape of this double knit I converted those gathers to pleats.  I decided to make it simple and place the pleats at the center front and the pattern notches.  To figure out the pleat uptake, I measured the bottom of my bodice (15") and the top of the skirt (25"), then divided the difference (10") by 4 to get a 2 1/2" uptake per pleat.  The photo shows the red where the center and notches are and the purple as the dart uptake amount.  I simply brought the purple to the red and voila!  Though, this photo is not entirely accurate as I did end up spacing the center dart a bit further apart in the end (moved everything out 1" from the center front to make a larger and more flattering center pleat).


I'm pretty happy with how these pieces turned out and looking forward to wearing them more once the weather starts to turn!  I took these photos during 90 degree weather here in Wisco and it was quite a sweaty feat.




Until next time...

Jess

Comments

  1. your dress looks great! the pleats give a sophisticated tone to mccall's 7561. i actually like the drapiness on your shrug--kind of a stole-thrown-on vibe instead of "everyday sweater".and the abstract print on your cardigan makes it so versatile for layering! congratulations on a lovely 3-piece capsule.--anne

    ReplyDelete
  2. That dress is perfection! I love the finishing and fit. And in that black/white, it'll be super versatile.

    ReplyDelete
  3. Those are super cute knit separates. Lining the bodice is a great idea, and thank you for the detailed instructions.

    ReplyDelete
  4. Thanks for your detailed explanation! I've been meaning to make M7561 so it's very timely!

    ReplyDelete
  5. Love the shrug! I've been stalking the sweater knits too. The dress is such a great versatile piece too!

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: A Wardrobe Staple for Spring - A Denim Coat

Hello Sewing Friends! It’s Sharon with Sharon Sews with my latest Fabricista make – a denim coat  for spring.  Denim is a wardrobe staple for many of us, and even more so this year with denim on denim looks coming back in style.  The denim I used is a medium weight cotton/lycra blend with about a 20% stretch selvage to selvage.  Fabric Mart always does an amazing job photographing and describing their fabrics, yet I still gasped in delight when I opened the package containing my denim.  It was even better than I had anticipated. This fabric would have worked well for a traditional denim jacket – one with button front closure, chest pockets with flaps, and a collar.   However, I have wanted to sew this open front coat with kimono inspired sleeves and big patch pockets since February 2021.  I saw it in that month’s  BurdaStyle Magazine, bookmarked the page, and promptly forgot about the coat.  It’s coat #105 if you’re interested in sewing one for yourself. Fortunately, I went on an organ

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month!  This year is the year I challenge my sewing skills.   I have wanted a moto jacket for some time.  Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one.  The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting.    Remember when I said I wanted to challenge my sewing skills?  😉 This fabric was beautiful but fragile to work with.  It was a great mental challenge that had me problem solving before sewing to avoid any potential problems.  I first traced out the pattern onto tissue paper to determine the fit.   I used scrap cotton fabric to sew up a “practice run” of the jacket.    I was pleasantly surprised at how easily the jacket comes together.   I sewed up the muslin in one evening.  It was time to cut into the beautifu

Made By A Fabricista: My Version of the Infamous DVF Wrap Dress

Just in case you are not aware, the iconic Diane Fustenberg wrap dress has turned 50 this year.  In celebration, Vogue has re-released the DVF Wrap Dress pattern, which now comes in extended sizes.  This dress is so classic and fits many different body types.  I got a hold of this pattern and decided this would be my birthday dress this year. This pattern is categorized as a Very Easy Vogue pattern, and I would have to agree with that. Wrap dresses are usually relatively simple to put together since there aren’t that many pattern pieces to sew together. I made View A in a size 22 and the only modification I made was to shorten the hem by 6 inches.  I will say that since I used a Ponte Knit , I could have gone down to a size 20.  I didn’t read the fabric suggestions before picking my fabric.  I’ve always remembered seeing the DVF Wrap dress in knits. After reviewing the fabric suggestions, they do say that you can use soft fabrics, like a Challis or a Chambray. As I mentioned, I’ve alwa