Skip to main content

Made By A Fabricista: Pink Raspberry Frosting


Pink raspberry frosting on a cake is delicious, but this pink raspberry frosting isn't dessert. I'm talking about sewing frosting! Have you heard of "sewing cake vs. sewing frosting?" If you're new to this concept, cake sews are your clothing and wardrobe staples. While frosting sews are less practical, super fun projects to make and wear.

When I saw this gorgeous raspberry pink swiss dot chiffon on Fabric Mart's website I knew I had to sew some frosting! I spent a good amount of time in 2023 sewing cake for my newly postpartum body. Since nothing fit the same way, and I had very few nursing-friendly clothes, I made a lot of basics. To start 2024, I figured why not sew some frosting and make a fun date night dress?

Armed with 4 yards of raspberry pink Swiss dot chiffon and 3 yards of magenta polyester lining, I set out to make a special dress. I knew I wanted to make a dress with sheer bishop sleeves to show off the chiffon, but it wasn't until I saw the new Seamwork Frankie dress that I knew it was the perfect pattern for my vision. The Seamwork Frankie dress comes in two versions, the original pattern featuring a gathered skirt, and the bonus pattern with a 6-gore skirt. I much preferred the 6-panel skirt because of the slim A-line silhouette.

I cut out a size 4 bodice and graded out to a size 10 for the waist and hip to accommodate my measurements. I wanted the entire dress to be lined so I cut everything in both fabrics, except for the bishop sleeves which I wanted to be sheer.

If you make a Seamwork Frankie, I highly recommend making a toile at least for the bodice and sleeve. Unfortunately, I did not sew a toile due to time constraints and lack of similar fabric, which I later regretted.

After cutting, I serged the chiffon and the lining bodice pieces together. This stopped the fraying of the chiffon and gave me one solid piece of fabric to work with for the rest of the bodice assembly. For the skirt, I wanted the lining to be free from the chiffon, so I attached all of the lining fabric pieces to make the skirt and then repeated this with the chiffon fabric. The two-layer skirt was then basted at the waist seam and attached to the bodice.

Since I skipped the toile process, I periodically tried things on to make sure the fit was correct. Since the sleeve insertion process is the very last step of the pattern, I had the whole dress fitting perfectly without the sleeves. Once the sleeves were inserted, something went wrong. The top of the sleeve bicep was so tight I felt like my arm was losing circulation. When I tried to get out of the dress, I got stuck in it! After a few moments of sheer panic and thoughts of "what if I have to cut myself out of the dress," I realized that my mother-in-law was visiting that day and she could help me get out of it. Thank goodness she was there because she was able to free me from the dress!

Since the bodice and the skirt fit perfectly without the sleeves, I knew I had to do something to try to fix the sleeves that didn't involve having to remake the entire bodice. After considering my options, I settled on letting out a few of the bodice seams around the arm scye.

The pattern includes a 5/8ths inch seam allowance, so thankfully I had some wiggle room. First, I dropped the back yoke seam and stitched it at 3/8ths inch. Next, I let out the underarm seam to 3/8ths inch and pressed everything well. This gave me some much-needed room in the arm scye.

After letting out the seams, I reinserted the original sleeve with a basting stitch to check the fit. The dress was still way too tight in the bicep area and I got stuck again. I was on the right track, but the sleeve was still so uncomfortable I knew further measures would need to be taken.


Thankfully, I had some extra chiffon fabric. My next idea was to cut a whole new sleeve in a larger size and to widen the arm scye curve of the sleeve a bit. I cut out new sleeves in a size 10 and widened the arm scye curve just a little bit too. Next, I paid extra careful attention to the pattern instructions, just in case I had missed something before during the sleeve insertion. I basted the new sleeve into the dress, tried it on, and slipped out of it with ease! I always struggle to get in and out of dresses with side zippers, but this time I could do it myself, so I counted that a success.

Finally, I had sleeves and a dress that fit correctly so I finalized the sleeve seams. Most people would have expected that working with the chiffon fabric would have been the hardest part of making this dress, but those sleeves gave me a run for my money! The chiffon was a cakewalk!

I'm really happy with how my first make of 2024 turned out and I'm excited to wear my new pink raspberry chiffon frosting dress as soon as I can! Despite my fitting set backs, I hope I've inspired you to stock up on some beautiful Fabric Mart fabric and sew yourself a little frosting this year!

SHAINA   @shaina_sews 


Unfortunately Fabric Mart Fabrics sell out quickly!
You can find similar fabrics by shopping the following categories: CHIFFON.

Comments

  1. Gorgeous! Love that fabric and pattern choice. It fits you nice too.

    ReplyDelete
  2. Perfect for Valentine’s Day, and the fit is spectacular! Way to go with chiffon, it is a tough sew.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Falling for Knits

We are now well into Fall, even though the temps are still relatively warm here in Texas.  I love the fall season and dressing for Fall.   When it comes to the conversation of knits vs. wovens I typically sew mostly wovens. So for this post I decided to sew completely knits!  With the holiday season right around the corner I saw these three dress styles as perfect for Friendsgiving/Thanksgiving gatherings.  The first look is a tried and true pattern Simplicity S9372.  Using this gorgeous burgundy ponte knit , I like how this pattern fits throughout. I chose this color to add to my typically neutral palette in my closet.  I also wanted something I could wear to my sorority meetings and found this color perfect.  It's an easy sew with back fisheye darts  and invisible zipper to add to the tapered style.  The neckline and armholes are finished with bias binding giving it a clean finish on the inside.  I used a universal needle to sew a...

Made By A Fabricista: Closing 2025 with a Lined Jacket

Hello again, sewing friends! It seems we have arrived yet again in the grandest season for layering, all this oncoming cold weather. I like ending the year with something warm and very useful. Seems based on my past Fabricista posts, I love to sew year-end outerwear, and this round is no different!  I challenged myself with a new lined coat (wait, jacket? Coat? I feel like the presence of wool changes things?). Anyhoo, since the lovely Chalk & Notch Den Jacket has been in my queue, I proceeded ahead. I like the large pockets, the option to line or not, and the extra bodice and sleeve seams for topstitching.  Sewing this coat is not at all difficult, but the many pieces and loads of topstitching will take a bit of time. My version took me a few multiple-hour sessions to complete. I sewed a size 2, which matches my measurements, and I made no alterations. Hint: for a quick size test, just employ the lining pieces.  Gorgeous, muted blue as a soft wool flannel ? This is ...

Made By A Fabricista: Chalk and Notch Wren Dress: My Buffet dress for the Christmas season!

  I recently sewed the Chalk and Notch Wren dress using a beautifully soft black voile from Fabric Mart, and it turned into such a satisfying, enjoyable project. The pattern itself is very easy to understand and straightforward with clear instructions, intuitive construction, and a relaxed fit that makes the sewing process easy. A buffet dress in the sewing community is a dress that is loose fitting, so you can eat at the buffet without your dress being uncomfortable afterwards, lol! Because the voile I chose is extremely thin and transparent, I opted to line the bodice and first tier. Adding a lining not only provided modesty but also gave the delicate fabric a bit more stability, especially around the neckline and button placket. A helpful tip when sewing a lining into a lightweight bodice is to treat the lining and the main fabric as one. I sewed the bodice as you would for a lined bodice, and the first tier I sewed the pieces together with a basting stitch to make the process...