Skip to main content

Made By A Fabricista: When Winter Strikes You Make a Fur Vest and Hat

Image
By

I know it’s been super cold over most of the US recently and even South Florida got a cold front a few weeks go.  It got so cold it snowed several inches in Orlando and Northern Florida! It was during the winter freeze that I was looking for fabric for my next make and came across this Black 100% Polyester Double Faced Faux Fur that is 64W.  This fabric is so soft and luxurious to touch. More on the fabric later though, because I have some tips and tricks I learned along the way.

I knew I wanted to make a vest so I started looking through my pattern stash and I came across McCall’s M7695. This is a Palmer/Pletsch pattern that uses the Tissue Fitting Method.  I honestly didn’t use the method.  I just looked at the measurements and decided on making the size 22 because I wanted the vest to be oversized.  This pattern comes with 4 different views.  The view I chose to make was View C with a minor adjustment. I chose to omit using the zipper and just followed the pattern instructions to sew it up.

The vest was not hard to sew up, but I would like to say that sewing fur is NOT for the weak of heart.  I had/have fur everywhere! I’ve seen people trace out the pattern piece on the wrong side of the fabric and put tape down on where you are going to cut which helps the fur from going everywhere, but I did not have a choice. The wrong side of the fabric had a lot of fur that was just falling off everywhere.  I did not pre-treat my fabric and I’m thinking if I had, it might have helped with the situation. Another tip for sewing fur is to use a walking foot on the sewing machine.  A walking foot helps with keeping the fabric together and helps minimize puckering or the fabric shifting.

Did you know that you can get free PDF sewing patterns from Mood? Well, you can.  If you go to Mood.com and search for The Bucket Hat, then you’ll find the pattern I used to make mine. I made the largest size without taking any measurements.  Don’t be like me if you want your hat to not be too big. Lol I wanted a Savanna James look but instead I’m feeling a little like Tia and Tamara from Sister, Sister. IYKYK.  I’m going to give you a quick and dirty tutorial of how I sewed up my hat.  

You will need to cut out 1 crown of fabric, 2 side panels and 4 brims. The pattern also calls to interface the brim, but I omitted doing that.  With right sides together sew 1 of the 2 pairs of brim pattern pieces at the short ends. Do that with the remaining panels. With right sides together pin the two brim pieces together and sew around the outside edge of the brim and turn it right sides out when done and put it aside. 

With right sides together, pin and sew the side panels together along the seams.  Once you have done that, take your crown piece and pin it to the side panels opening along the top and sew around the circle. Place the top part of the bucket hat inside of the brim, right sides together and sew. Now you have a bucket hat!

I hope you guys enjoyed my fur vest and bucket hat. When I’m not guest blogging on the Fabric Mart blog, I’m usually hanging out over on my Instagram page, so make sure you follow me over there!  

Until next time.





JOHANNA | @soveryjo

Comments

  1. AnonymousFebruary 3, 2025 at 8:14 AM

    Looks cute! I think it was worth the mess of sewing on fur for this one!

    ReplyDelete
  2. CarmenFebruary 7, 2025 at 8:58 AM

    The hat is a perfect compliment to the vest.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Recent Posts You Might Like

Return to work wardrobe in ITY – which is your favorite?

By
In June of this year, after spending nearly 11 years at my place of employment and after restructuring and cost cutting, I took a separation package. I was so fortunate to be able to take a few months off, and also to very quickly find a position with a new company. I start my new job on September 14th and I’m super excited!  This new position is also different for me in that it is local to my area (whereas before I worked remotely and traveled to the office every few weeks) – so I’ll be going into the office three times a week. So of course I needed to sew up some new outfits! I’m a huge fan of ITY knit fabric ; ITY stands for interlock twist yarn, which describes the way the yarn is knitted together. I love it for tops, dresses, skirts, and even pants: it’s comfortable, easy care, low wrinkle, and comes in so many beautiful prints. I sewed up three new outfits over the last two weeks and I’m excited to share them with you today! Oh, and also – I need help choosing what to wear fi...
18 comments
Continue Reading »

Sometimes The Fabric Chooses The Pattern

By
Have you ever fallen in love with a fabric and immediately envisioned exactly what you wanted to make, only to realize halfway through the planning process that the fabric had other ideas? That’s exactly what happened with this project. I used Fabric Mart’s Black/Dark Cobalt/Smoky White Poly Foliage Print Chiffon , and while I initially had plans for a detailed dress, the fabric ultimately led me in a completely different direction—and I’m so glad it did. When I first saw this gorgeous chiffon print, I was immediately drawn to the rich color palette and beautiful movement. The dark background paired with the cobalt and smoky white foliage creates a striking look that feels both dramatic and versatile. My original plan was to make a dress with princess seams, buttons, and more structured design elements. However, after spending time with the fabric, I realized that all of those seam lines and construction details would compete with what makes this chiffon so beautiful: its drape, moveme...
6 comments
Continue Reading »

Hillhouse Nap Dress Dupe with Fabric Mart Fabric!

By
I have been wanting a Hill House Home Nap Dress for the longest time, but when I saw the reviews that the fabric was too sheer and the price tag—often well over $200—I decided it would be much more fun to make my own! I found this gorgeous abstract navy and white cotton voile from Fabric Mart and knew it would be perfect for the light, floaty dupe I had in mind. Cotton voile is soft, lightweight, and beautifully suited for a shirred dress like the infamous Nap dress. This abstract print gives the finished dress a more modern feel. I love a floral fabric, but I was excited to find this abstract print in my favorite color of navy.  Rather than using an entire dress pattern, I followed Just Lauren Johnson’s YouTube tutorial on how to create a Nap Dress from rectangles. Lauren walks you through how to use your own measurements to calculate the dimensions of the bodice, skirt tiers, and other pieces. I loved this approach because I could create the dress specifically for my measurement...
7 comments
Continue Reading »

Sewing With Intention: New Look 6106 and a More Coordinated Wardrobe

By
Sometimes a sewing project begins with a beautiful piece of fabric or a pattern you just have to make. This one began with my closet. Recently, I did a major closet purge. I took a good look at what I actually wear, what I kept reaching for, and—maybe more importantly—what was missing. Once the pieces I no longer loved or wore were gone, something became very clear: I want to be more intentional about what I sew next. Instead of sewing individual pieces that I love but don't necessarily wear together, I want to build a wardrobe where my handmade garments coordinate with the clothes I already own—and with the pieces I'm planning to sew next. For this month's Fabricista project, this beautiful lightweight shirting from Fabric Mart turned out to be a wonderful place to start. The Fabric That Started It All Fabric Mart provided this beautiful oatmeal and black heathered shirting , along with the matching thread for my project. One of the things I love most about this fabric is ...
9 comments
Continue Reading »