Skip to main content

Made By A Fabricista: Bewitching in Pink

It's after a July fourth, you know what that means? HALLOWEEN! When I checked my stash of patterns for inspiration I found a witch hat pattern and I couldn't resist since I could style and reuse both the hat and skirt for several characters as well as have a new skirt for my wardrobe!

I absolutely love making hats, from beginning to end it's so relaxing for me. Once I had my pattern for the witch hat printed out and assembled, I started by reenforcing my main fabric, a Malibu Pink stretch sateen shirting with some interfacing for both the hat and brim. Taking separate interfacing for the internal structure of the brim I stitched wire to both the outer edge of the brim and the middle since I knew this hat would be a bit heavy, I wanted extra support!

Once the support layer was done, I covered the underside (where the wire was attached) I added a layer of batting, then attached the caps to their brims for both the exterior and lining, before sandwiching them together. To finish the raw badge along the brim I used some raspberry polyester shantung to bind the edge by hand with whip stitches, and finished off with a band and bow with the shantung at the base of the brim.

For the skirt I did it in my favorite style, like that with 18th century skirts the waistband is in two halves for the front and back skirt panels. When making pleated skirts, I love to do a box pleat at center front, then knife pleats angled out from center. I also continue the angle of the pleats to the center back ending in an inverted box pleat.

Since the side seams are open at the top so I can access pockets (also in the 18th century style) I opted to do a rolled hem on each panels sides before sewing the side seams. Since the selvedge was able to be used as the hem, I opted to just fold back the edge to hide the selvedge and have a pretty and neat hem. As a closure, I wanted to try something new, so instead of the traditional ties (and still avoiding a zipper) I decided to try out a button closure and honestly I'll probably do this more on this style of skirt!

I'm so excited to add a new skirt to my wardrobe as well as have a perfectly pink hat and skirt combo I could use a variety of characters! Witch Princess Peach? Witch hat Galinda? Witch Barbie? This set will have endless opportunities in my cosplay wardrobe!


MINA  @cosplaytology 

Comments

  1. Cute outfit! After all, costumes weren't costumes originally - they were what people were wearing at the time! I have also seen a so-called costume pattern for a hooded cape made into an "everyday" garment - a different choice of fabric was all it took! Enjoy your "Summerween!"

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Recent Posts You Might Like

Made by a Fabricista: What to Make with Silk Taffeta

You may have noticed that Fabric Mart has a *HUGE* selection of silk taffeta right now.  A lot of it is either large plaid or large stripes.   I was curious about it, and not really sure what I could make with it, but I just knew it would be gorgeous fabric and had to play around with it.  Turns out, it's actually great for quite a range of projects!  The dress above is my third project. Let me show you the first two. My first was to make some queen size pillow shams.  They are the plaid ones in the back of the photo.  I also made the two printed ones in the center from another Fabric Mart home dec fabric special!  I wanted to make the covers removable with a zipper, and include a braided trim.  As luck would have it, I found a whole card of braided trim at an estate sale that worked with my taffeta for just $2! To start, I used a zipper foot to stitch down the braided trim all around one side of the pillow. Then I serged ...

Made By A Fabricista: Mechanic Chic!

When it comes to buying ready-to-wear garments as a sewist, I only ever spend in three categories: heavy duty winter jackets (life in Maine!), bras… and jumpsuits! I love a good jumpsuit, but unfortunately the ones I used to buy have been impacted by the tariff situation and I can’t get them affordably anymore. This can only mean one thing, folks: it’s time to roll up my sleeves and sew my very first jumpsuit!  When I started planning for this project, I knew I wanted to use a heavyweight linen for cozy comfort in the fall and breathability in the summer. I wanted something that would wear beautifully and soften with age, and something with neutral tones that could go with everything. Naturally, when I came across this 100% linen canvas on Fabric Mart, my heart skipped a beat! I love the ikat-inspired geometry and something about it reminds me of leopard spots too. Bold yet wearable! I am pretty sure this fabric was intended for home decor which I don’t mind at all and in fact of...

Made By A Fabricista: Tried and true summer basics that fit.

Happy Summer Friends! As I am writing this, we are headed into a nasty heat wave…so the timing could not be better to share two of my favorite summer patterns and fabrics.  But first, let me tell you about the fail I had heading into this month’s blog… As Fabricista’s, we get to pick out fabric for each of our blog submissions. I fell in love with this gorgeous lilac jacquard knit that I thought would be perfect for a pop of color in my summer wardrobe. But I made a fatal error - I grabbed a pattern I haven’t made for years, quickly went up one size to account for a few new pounds, and sewed them up. And they don’t fit, will NEVER fit, and will never be worn. Sigh…when will I learn?? Here’s a flat lay pic so we can at least look at the lovely fabric: The lesson I learned (relearned!) is that just like with off the rack clothes, the things that worked well for me years ago don’t work well for me today.  And that’s the case with both tops and bottoms. So I went back to two patt...

A Yard And Change

Do you have a fabric that you love and has been hanging around but is too small to use? Maybe you found a wonderful fabric with a super cute print but there's only a yard left.  I've got a few projects I worked on all with roughly a yard of fabric. And I have a few tips for making that yard and change go further! Cutting Layout: You can get a lot more mileage out of a yard of fabric if you can get creative with how you lay out your fabric. Cutting things single layer will give you the most control. My favorite thing to do is unfold the fabric and fold the selvages in to meet in the middle. That gives me two folded edges to work with. I had to overlap these to get enough width for the tank top. Just make sure that your pattern pieces don't also overlap!  This one was especially fun for me because I really loved the print on this swimwear knit but am not yet up to sewing swimwear. But a nice flowy hiking tank is perfect for this! In the future I'd love to experiment with...