Skip to main content

Made by a Fabricista: Critical Ruffle

For the uninitiated, Critical Role is a group of nerdy voice actors playing Dungeons & Dragons every Thursday. I've already been a long time fan and cosplayer of the character Jester Lavorre from their second campaign (recently adapted to the animated series The Mighty Nein), but recently they started their fourth campaign! With this new campaign, we got a new cast of characters and I absolutely fell in love with the chaotic pink demon named Tyranny. 

When looking at my options for fabric for Tyrannys outfit, I found the perfect fabrics, a seafoam-blue polyester taffeta and a platinum colored charmeuse. The colors were perfect and I loved the combination of textures that felt appropriate for Tyrannys role as an aspirant of a religious order. 

When it came to patterning the cosplay, I used my go to bodice pattern, adjusting to have a zipper at center front that would be covered by the tabard that was also cut out of the taffeta stiffened with interfacing and with the charmeuse used to line it. For the lining of the bodice, I used remnants from my Fabric Mart project from a year ago, the soft cotton from my Nene Yashiro cosplay! 

I then cut the little capelet from both fabrics, and from the excess I free handed the shape of the peplum that goes on the bodice to reduce waste since luckily enough the curved edge from cutting the capelet out fit my waist perfectly! 

For the final pieces, I cut four yards to the length I needed for the skirt from the charmeuse, and a half circle from the taffeta for the veil. Not to mention yards, and yards, and YARDS of strips from both the charmeuse and taffeta for all the ruffles that Tyranny is drenched in. 

I got the bodice assembled, the veil hemmed, and then couldn't make much more progress without the ruffles, so for a week I did nothing but joining with French seams, hemming, pressing, and pleating the strips until I had an army of ruffles ready to go! After that it was quick to assemble, repeating the process of sandwiching the ruffles between outer and lining layers, flipping them to the right side out, and pressing them cleanly. 

Once the pieces were all fully assembled, it was time for my favorite part; tedious hand sewing! Tyranny has designs on her chest, shoulders, and tabard. For the tabard and the shoulders, I alternated faux pearls and long glass bugle beads for the sunshine design as well as the border of the tabbard, adding at the tip a clear dice bead left over from one of the other Critical Role cosplays and a little feather pendant as a nod to Tyranny's companion Wicander. 

For her moon cycles design, I used a scrap piece of the platinum charmeuse backed with a stiffer interfacing and traced a spool of thread to get the design. I kept it as one full piece to maintain spacing on the moons and used the quilting function on my machine to see the outlines of each moon to the front of the capelet, trimming the excess leaving a little bit of seam allowance. Once attached, I went around the edges by hand binding the edges with embroidery floss. 

For the last details on the dress, I found the perfect matching trim in my stash, with just enough to decorate the peplum, along the hem of the veil, and onto the large ruffle on the skirt. The tabard was finished off with some buttonholes and covered buttons to match. 

If you think the fun stopped there, nope! To avoid having to wear body paint on my arms, I found two way stretch cotton knit in my stash I bought from Fabric Mart years ago for something(?) and was the perfect color. In my opinion, pants are harder than gloves, just tracing the shape of the fingers and making a thumb piece. Since the fabric only had 2 way stretch, I couldn't rely on the stretch of the fabric to keep the gloves up, so I added buttonholes to the tops of the sleeves and coordinating covered buttons to the shoulders of the bodice so that I don't have to be concerned about them falling. The fingertips of the gloves got a bit of black paint before black fake nails were added to help sell the illusion of it being skin. 

With the final strips of charmeuse being sewn into a belt, Tyranny was finished! She was a labor of love from start to finish, I'm so excited to start my year strong with her, she's so comfortable and lightweight, I look forward to wearing her year round! 


 MINA  | @cosplaytology  

Comments

  1. While I am not familiar with the character , your sewing is wonderful and you captured the effect in the illustration very well.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Recent Posts You Might Like

Sewing With Intention: New Look 6106 and a More Coordinated Wardrobe

Sometimes a sewing project begins with a beautiful piece of fabric or a pattern you just have to make. This one began with my closet. Recently, I did a major closet purge. I took a good look at what I actually wear, what I kept reaching for, and—maybe more importantly—what was missing. Once the pieces I no longer loved or wore were gone, something became very clear: I want to be more intentional about what I sew next. Instead of sewing individual pieces that I love but don't necessarily wear together, I want to build a wardrobe where my handmade garments coordinate with the clothes I already own—and with the pieces I'm planning to sew next. For this month's Fabricista project, this beautiful lightweight shirting from Fabric Mart turned out to be a wonderful place to start. The Fabric That Started It All Fabric Mart provided this beautiful oatmeal and black heathered shirting , along with the matching thread for my project. One of the things I love most about this fabric is ...

Meeting Endless Summer Energy with a Maxi Dress

How are the temps still so hot?! I’m trying to make the best out of a blazing situation with a gorgeous swishy dress made in a splendid graphic print in an attempt to keep my cool when I am very much not. The heat persists, but so do I (while wearing sundresses)!  I really wanted a full length, all-fancy-design-details-included version of the new Chalk & Notch Noe Tank Dress since testing the pattern. This is View C. This version features a beautiful open back with a tie closure and the long gathered hem for maximum impact.  I chose the higher of two necklines. The pattern features full lining and I used the same fabric for both. I prefer to avoid any peeking-issues the easy way.  As I was scrolling through the challis options on the Fabric Mart site, this one stood out immediately, a beautiful kelly green with big abstract swipes of aqua. Simple, bold, (non-directional!), all of my favorite characteristics necessary for a showstopping dress. I wanted something very ...

The Perfect Plan for this Linen Blend! Until I Changed My Mind.

Hello Sewing Friends!  It’s Sharon from Sharon Sews with another Fabricista make.  When I saw this linen blend designer fabric on the Fabric Mart Fabrics website, I was intrigued.  After all, I, like many of you, love to find designer fabrics at an affordable price. It is a linen/nylon/rayon/Lycra blend, and I wondered what the designer had created with the fabric as I wasn’t familiar with that combination of fibers.  Surprisingly, I discovered a sleeveless, lined, mid-length vest in the same color with an almost identical fabric composition. Perfect! I’ve been wanting to sew a longer vest with matching pants, and that discovery confirmed this fabric would work beautifully for the look I had in mind.  The vest I’m wearing, from the June 2026 Burda Style magazine, it is not what I was originally going to make.  You see when I found the designer’s vest, I remembered seeing a Butterick pattern that was almost identical.  I ordered the pattern excited to...

Fall + Flannel = Shacket

If there is one piece that transitions easily between crisp fall mornings, mid-day warmth, and chilly autumn nights, it’s a shacket. Today, I’m excited to share my latest Fabric Mart make: the Ellie and Mac Patterns Connie Casual Shacket, sewn in a dreamy plaid flannel coating fabric . Here’s a glimpse at how it came together, along with a few construction tips for planning your own version! The Ellie and Mac Patterns Connie Casual Shacket pattern offers plenty of options needed to make the perfect transitional top layer for fall. With a relaxed body, oversized sleeves, three lengths, and a curved or straight hem option, you can make your dream shacket a reality.  For this sew, I selected a plaid flannel coating fabric with a soft blend of sage green and cream tones from the Fabric Mart website. Heavyweight flannel is ideal for a shacket because it provides structure and added warmth. As a bonus, this particular fabric is extra soft and snuggly, which I love. In addition to the fa...