Skip to main content

Made by a Fabricista: Sewing with Mesh Knits


I'm going to interject into the Fashion Challenge with a tutorial on mesh knits!

Over the weekend, I was working on an inspiration piece for our Julie's Picks customers. I used a mesh print and jersey knit that will be included in the November Julie's Picks. (Sorry, these fabrics are only available to JP member's, but we have plenty of others available on our website.) Some people may be intimidated by mesh knits, but have no fear! I did some research on how to sew with them first and was prepared from the beginning. They are easier to work with than you think. Think of them as a lightweight or sheer knit.

Here are a few tips I researched, then used in my project:

1) Sew slowly and with a new needle. It is always good to start a project with a new needle, but I felt like if I had a dull needle it would pucker the fabric. Because I was sewing a mesh to a knit, it was even better. The knit and mesh stick together and allow for easy sewing. There were only two places I was sewing only with mesh: the hem of the mesh knit bodice and the sleeve hem. I stretched the mesh slightly and also used a stay tape, which helps keep it in place through wear.

2) Use stay tape if only sewing mesh. The stay tape helps keep it in place through wear.

3) Pre-wash your mesh. It is recommended to hand wash mesh knits because of pulls and puckering. I will machine wash my shirt, but probably by itself or in a lingerie bag on gentle cycle. Do not put it in the dryer, you don't want to risk it melting! Lay flat to dry.


I used Angela Wolf's Ruched T pattern. We carry this pattern on our website, but it is sold out right now. We have it on order and hope to receive it in the next couple of weeks! This pattern is really easy and fits great! I don't like fussing with patterns and you don't have to with this one. I made this pattern before so knew what to expect. It comes with three different sleeve variations and five different collars. I selected the regular collar and decided to do long sleeves without ruching. I also did not do ruching on the side seams.

Here you can see the bodice hem. I pre-hemmed the mesh knit, and pressed a line in the knit so I knew where the mesh knit hem needed to end. Then sew right sides together as usual. 
Since I made the pattern before, I had made note that the bodice needed to be cut about 3-4 inches shorter for a non-ruched top. I cut the jersey knit out first, then the mesh knit. I decided to hem the mesh and knit separately. When laying the mesh and knit together, I pre-hemmed the mesh. Then aligned the mesh piece on the knit. The pattern directions tell you to press a hem on your fabric before sewing the side seams, so I did that. That also helped me determine where the bottom of the hem on the mesh knit needed to be because I didn't want the mesh to go past the knit.


After I had the bodices sewn at the shoulder and the hem in the mesh print, I attached the sleeves. The directions call for you to do this, rather than on some patterns they want you to sewing the side seams first. (I really don't like doing them that way, so I was thankful for this direction in the pattern!) I laid the mesh knit only sleeve on the right side of the bodice pieces and sewed them together. Then I sewed the side seams together. I had to bring the sleeve in a little bit. I think it is the nature of the mesh knit --- a normal sleeve is a little looser, and I wanted the mesh to be a bit more snug, but not tight.


When sewing the sleeve together, I used stay tape to keep it stable. I also used it in the hem of the bodice and sleeves.  
I made the standard collar out of solid knit for a very RTW look. I also top-stitched just under the collar on the mesh. I love the way it turned out! I especially like it because it was quick, easy and fit without hardly any changes. I fooled a lot of people--they asked me where I bought my shirt!




Don't be afraid of the mesh knits. They are harmless. Plus if you add a regular knit fabric to them, it becomes even easier!

Comments

  1. Thanks for the tutorial. I loved the mesh knit samples I received with the Julie's picks; but did not know how to sew them. This tutorial was very helpful.

    ReplyDelete
  2. I have a mesh knit that I bought last year from you and have been trying to decide what to do with it! I love the layered Tshirt look and may do that!

    ReplyDelete
  3. This is great. I just bought some mesh knit and can't wait to use it. Thanks for the tips.

    ReplyDelete
  4. So you basically made two bodies and sewed them together by binding the neckline? And the sleeves were the mesh only attached to both the mesh and lining layers? Great top!

    ReplyDelete
  5. Is the stay tape a mesh type or do you carry this tape

    ReplyDelete
    Replies
    1. This particular stay tape does have a mesh-look to it, but you can use any stay tape. Unforntunately I do not have any stay tape available at this time. Good luck!

      Delete
  6. This comment has been removed by a blog administrator.

    ReplyDelete
  7. This comment has been removed by a blog administrator.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Pattern Emporium’s Lyrical Top Featuring Fabric Mart Fabrics

 Sewn in a lightweight  rayon challis , this top combines style, comfort, and fluidity. There’s one thing I love in a summer sew: effortless drape—and the Lyrical Top by Pattern Emporium delivered just that. This pattern is a new release, and when I spotted this dreamy rayon challis from Fabric Mart Fabrics, I knew it was the perfect pairing. Lightweight, breathable, and with just the right amount of movement, the fabric really brought the pattern to life. Today, I’m sharing all the details—from fabric choice and construction to styling and fit—plus a few thoughts on why this top might just become a repeat sew. Pattern Overview: The Lyrical Top by Pattern Emporium The Lyrical Top is a relaxed-fit design with bloused sleeves and a gently flared frill cuff. It comes with three sleeve lengths and two neckline variations. I chose the tie-neck view, but there’s also a collar option for a slightly different vibe. I’ve been looking to add more stylish tops to my wardrobe this year, a...

Made By A Fabricista: Oversized Jenna Shirt for Summer Fun

 I may or may not have had several meltdowns during the making of this Closet Core Jenna Shirt… But let’s back up first. During the month of May, I promised to wear handmade garments every single day for the popular sewing challenge “Me Made May.” I really enjoyed thoughtfully putting together my outfits each day. While I was doing this, I was taking notes of the gaps in my wardrobe. Particularly, I don’t have many transitional shirts that could work for on-camera work attire and be comfortable for the weekend. When I saw this delicious cotton lawn on the Fabric Mart website, I knew that I wanted to make a button up shirt that would be both work appropriate and a nice overshirt for summer evenings over my tanks and tees.  I have made a few button up shirts before using a vintage Stretch & Sew pattern but I decided to try my hand at the Closet Core Jenna Shirt (up to a 60” chest) which has had rave reviews on social media and pattern sites for being a great pattern with e...

Made By A Fabricista: A matching set and a happy error.

 Hi sewing friends! Today I’m sharing a new outfit I made inspired by looks I’ve been seeing pop up in my Facebook and IG feeds a LOT this year. I’m talking about those monochromatic matching top and bottom outfits, sometimes in linen, sometimes in a flowy knit - the ones that advertise they go effortlessly from loungewear to office wear to going out wear. So I decided to “sew the look” using Fabric Mart fabric and a few patterns I already in my massive pattern library. First, let me share that I have very few solid color pieces in my closet. I’m so taken in by whimsy and geometric prints that this is still a gaping hole in my wardrobe -  a matching solid color set was actually a practical addition for me.  So let me walk you through how I created this look, and also tip you off to an error I made while cutting that worked out pretty well after all. Can you spot the error? Hint - it’s somewhere in the top: Here’s how I went about building my matchy match outfit. And here’...