Skip to main content

Made by a Fabricista: By Hand London Victoria Blazer

Hello there!  I don't know about over in your neck of the woods, but here in Indiana it's been raining cats and dogs for the past couple of weeks.  I've been anxiously waiting for the weather to let up so I could get pictures of my next make for the Fabricista blog, The Victoria Blazer.



The pattern is By Hand London's Victoria Blazer that was released last year in their Spring/Summer collection.  It's a casual blazer with 3/4 length sleeves that have french seamed cuffs so you can wear them up or down.  The jacket variations are full length, cropped and sleeveless.  The design is casual and laid back so there is a generous amount of ease which makes for a very easy fit.



The pattern calls for a light to medium weight woven fabric with some body such as cotton, linen, chambray, denim, tweed, etc.  Ponte or double knits are also good options.  I used a slightly stretchy vertical striped cotton sateen from Julie's Picks last month.  I like to live on the wild side so I cut my fabric on the crosswise grain to end up with horizontal stripes.  Before I got all cut happy I took a couple of things into consideration first...
#1 - Stretch...The fabric had absolutely no give on the crosswise grain.  Stretch would of been a big contender if the jacket style was more fitted but it's not so I wasn't worried.
#2 - Drape...I knew cutting against the grain would affect the drape and in effect cause some fit problems.  I was confident I could work those out so I got to cutting.



Ok let's get down to the nitty gritty, fitting and construction!  Again because of the oversized fit of the jacket I was convinced fitting would be a breeze.  Still though I made a muslin to be sure.  The shoulder seams drooped a little too far past my shoulders for my liking.  I shortened those by 1/2 inch.  I also had to shorten the sleeves by 2 inches...I have some short arms.  

The pattern instructions/illustrations were very clear and easy to follow.  BHL also has a sew-along over on their website if your like me and need a little extra hand holding.  Hey nothing wrong with that!

When I arrived to the point where the jacket shell was completely assembled I seen where cutting on the crosswise grain was affecting the drape.  You can see in the picture below how the back balloons out A LOT.  To correct this I added two back darts, 6 inches in length and 1 in wide.


The blazer has a partial lining.  The sleeves are not lined and the lining is left unattached at the sleeves.  I found this kind of odd so I followed a few other bloggers and attached my sleeve lining to the sleeve seams.  This also helps to keep the lining from sagging and peeking out at the bottom hem.  You can see below how I attached the lining to the sleeve.  This picture was after I washed the blazer so my pinked seams weren't as pretty and ironed flat as they once were but you get the idea.  My lining was a lightweight cotton poplin from my stash.



I ended up doing two photo shoots.  After going through the pictures from my first shoot I was just not happy with the way the back of the blazer was still ballooning out.  Ok ok I wasn't happy with my hair either but that's a whole nother story!  I had already washed it once hoping it would soften up and fall into place (the blazer, not my hair) so I got out my seam ripper and re did the back darts.  I lengthened them another 2 inches making a total of 8 inches in length and widened them another inch each for a total of 2 inches in width.  I think it was an improvement.  You decide...



This blazer came together pretty quickly.  I worked on it for an hour or two each evening after work and had it completed by the weekend.  If casual and laid back is your style then this pattern has your name written all over it.  I'm more of a fitted jacket kind of gal however with my shoulder/sleeve alterations and the body of my fabric I think I found a nice balance between the two.  I would/will make this pattern again and opt for the full length style.  I love how cool and chic Victoria herself looks in the vest styled over a cute little black dress.



 - Shannon from Shanni Loves

Comments

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: Milo + Citrine

Hello sewing friends! It’s Andrea - @happy.things.here on IG and today I’m on the blog to share some sew inspo on one of my favorite kinds of garments to make – cardigans! I absolutely love making them and wearing them year-round, whether it’s an extra layer for around my house in the winter, as my outermost layer in Spring and Fall, or paired with a dress on a cooler summer evening. I love love love cardigans! And there are so many great cardigan patterns out there – chances are that each of your favorite pattern companies offers multiple cardigan patterns. Button-less cardigans are great beginner patterns, and a handmade cardigan is a lovely personalized gift since it’s more forgiving for fit and you don’t have to know someone’s exact measurements to make one. And you can make them in all sorts of knit fabrics too.  Today I chose two cardigan patterns to share with you that I think bring a little something extra to the table. They are the Seamwork Milo and the Made by Rae Citrine.

Week 4: Jeansmaking- What They Made

This is it, the final round! And we certainly did not go easy on our three remaining contestants this time. This round they had to make their own pair of well fitting jeans. I think they all did an absolutely outstanding job! Take a look what these ladies accomplished & be sure to vote for your favorite! (Link at bottom of post.) And, don't forget to show us your me-made jeans on Facebook or Instagram. Details at the bottom of this post. Danesha from  Classyfied Life So first I must say that this entire challenge has been just that...a challenge! Two weeks ago there was hurricane Irma and I was blessed enough to not lose power and then I went out into the aftermath to capture some photos of my submission. Then two weeks ago I had a big trip planned so I had to do EVERYTHING  in two days . Then the BIGGEST challenge of all...THIS week! I got the challenge and I was super excited to have an extra few days and then before I could even get started I ended up in the eme

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month!  This year is the year I challenge my sewing skills.   I have wanted a moto jacket for some time.  Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one.  The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting.    Remember when I said I wanted to challenge my sewing skills?  😉 This fabric was beautiful but fragile to work with.  It was a great mental challenge that had me problem solving before sewing to avoid any potential problems.  I first traced out the pattern onto tissue paper to determine the fit.   I used scrap cotton fabric to sew up a “practice run” of the jacket.    I was pleasantly surprised at how easily the jacket comes together.   I sewed up the muslin in one evening.  It was time to cut into the beautifu