Skip to main content

Made by a Fabricista: Tutorial on Collar for "A Right to Bare Arms"

If you read my review on "A Right to Bare Arms", a sleeveless top by Dana Marie Designs, you will see that I talk a lot about the collar. The pattern comes with directions on how to make the collar with a bias collar and a non-bias collar. 

On my first attempt at this top, shown below,  I made the collar from a black ponte knit. I chose the ponte knit because I didn't want to mix a knit with woven. I also didn't have any solid wovens in my stash, so I opted for the black ponte thinking it would have enough stability. Putting a knit on bias is not a smart choice. (I should have known better!) Here are some close-ups of my issue...


I really should have used the non-bias method if I wanted to use the ponte knit. 



I decided to make another top, but this time using a woven for the collar and cut it out from the non-bias method. Here were the results: 


Much better don't you think? I also top-stitched the collar to give it more strength. As I mentioned in the previous blog post, I used a loose-weave linen for this collar with interfacing. 


For the sake of my reader's, I wanted to try the bias-cut again. I selected a cotton shirting to test. The pattern calls for you to cut out a 4"x 22" bias strip. 


Using the paper patter as your guide, pin one end to the pattern piece. 


Gradually stretch it following the pattern and steam iron at the same time. Pin as you go. 


Let the collar cool, then finish the pattern as read. 


I still did not have success with the bias-cut method. I laid it over one of my finished tops to mimick the curve it needs to take and it still did not lay flat.


I'm the kind of person that likes to have things work the first time and unfortunately, I have to say I will not be trying the bias-method again. It may have to do with the fabric I selected (again.) Maybe I need a softer fabric like a voile or challis. But to make my life (and hopefully yours) a little easier, I will be doing the non-bias method in the future.

Other than the collar, I really like this top. It is super easy to make and can be done in an afternoon. The fact that it can be made in different lengths is even better!

Happy Sewing!
Julie

Comments

  1. I don't know if it was the collar alone that was the problem. I purchased from you all and used the paisley fabric which you used for the body of the shirt. That fabric gave me fits, every time I wore the dress it "grew". It never hung correctly.I know the ponte knit was not ideal, but I do not know if you could ever succeed with that fabric.

    ReplyDelete
  2. Thanks for sharing. I learned a lot with this post.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: Milo + Citrine

Hello sewing friends! It’s Andrea - @happy.things.here on IG and today I’m on the blog to share some sew inspo on one of my favorite kinds of garments to make – cardigans! I absolutely love making them and wearing them year-round, whether it’s an extra layer for around my house in the winter, as my outermost layer in Spring and Fall, or paired with a dress on a cooler summer evening. I love love love cardigans! And there are so many great cardigan patterns out there – chances are that each of your favorite pattern companies offers multiple cardigan patterns. Button-less cardigans are great beginner patterns, and a handmade cardigan is a lovely personalized gift since it’s more forgiving for fit and you don’t have to know someone’s exact measurements to make one. And you can make them in all sorts of knit fabrics too.  Today I chose two cardigan patterns to share with you that I think bring a little something extra to the table. They are the Seamwork Milo and the Made by Rae Citrine.

Week 4: Jeansmaking- What They Made

This is it, the final round! And we certainly did not go easy on our three remaining contestants this time. This round they had to make their own pair of well fitting jeans. I think they all did an absolutely outstanding job! Take a look what these ladies accomplished & be sure to vote for your favorite! (Link at bottom of post.) And, don't forget to show us your me-made jeans on Facebook or Instagram. Details at the bottom of this post. Danesha from  Classyfied Life So first I must say that this entire challenge has been just that...a challenge! Two weeks ago there was hurricane Irma and I was blessed enough to not lose power and then I went out into the aftermath to capture some photos of my submission. Then two weeks ago I had a big trip planned so I had to do EVERYTHING  in two days . Then the BIGGEST challenge of all...THIS week! I got the challenge and I was super excited to have an extra few days and then before I could even get started I ended up in the eme

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month!  This year is the year I challenge my sewing skills.   I have wanted a moto jacket for some time.  Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one.  The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting.    Remember when I said I wanted to challenge my sewing skills?  😉 This fabric was beautiful but fragile to work with.  It was a great mental challenge that had me problem solving before sewing to avoid any potential problems.  I first traced out the pattern onto tissue paper to determine the fit.   I used scrap cotton fabric to sew up a “practice run” of the jacket.    I was pleasantly surprised at how easily the jacket comes together.   I sewed up the muslin in one evening.  It was time to cut into the beautifu