Skip to main content

Made by a Fabricista: Fall Icebreaker Shirtdress



I'm happy to be back on the blog with my fall sewing icebreaker. I'm finished with my summer sewing and looking to make some pieces for fall even though it's 104 degrees today. Sewing a plaid wool skirt doesn't sound fun at the moment so I wanted something that would work on those all too frequent 90 degree October days when I don't want to wear a sunny yellow halter dress but a skirt and sweater will just make me cranky. A transitional dress is exactly what I need.




Shirtdresses are all the rage right now and this J.Crew dress inspired my first project for fall. I've had this Vogue pattern in my stash since the early nineties (seriously....someone needs to give me some tough love about my pattern stash!) and it's perfect. No need to buy a pattern and even better I'm justifying my stash.


For my shirtdress knockoff I chose a J.Crew stretch cotton stripe shirting from Fabric Mart even though the inspiration dress is made of wool.  In my climate I can comfortably wear a wool dress exactly 3 times a year so cotton not only makes sense but is easy care, practical and comfortable.


The fabric was very easy to sew but like so many striped fabrics, I found the stripes would play tricks on my eyes when I was sewing.  I added a piece of painter's tape (it doesn't leave residue) on my machine at the 5/8" seam line making it easier to sew an accurate seam.


For the curved seams, I made an arrow across from the needle to mark where my fabric needs to land.  It's only important to line up the raw edge on the 5/8" line across from the needle not the entire way down the tape. Thinking about it this way makes it much easier to sew a curved seam.


I had planned on keeping this project simple like the J.Crew dress but as I was sewing I wanted to add some red. Red buttons were too much so I decided on red corded buttonholes. I took red pearl cotton from my stash and here's how I did it:


I flipped the buttonhole foot over and wrapped a length of pearl cotton over the back hook.


From the top of the foot I ran the tails of the thread through the bottom prongs to hold the thread in place then stitched the buttonholes just as I normally would.


After taking the work out from under the machine, I pulled the right tail thread through to eliminate the loop.


Lastly, I loaded the tail threads through a large hand sewing needle, pulled them through to the back and clipped them.  It's that easy!  It's these little details that make sewing fun!



I broke the ice for my fall sewing so what does your fall sewing plan look like?

Happy sewing....Diane at Gatorbunnysews.

Comments

  1. I love this so much! The pattern look exactly like the inspiration dress! You must be a mad sewing genius though to figur out that buttonhole trick. I'm in complete awe!!!!

    ReplyDelete
  2. I fully agree with Colleen. And those buttonholes are ingenious...the right touch of red, just as you'd planned. Thanks for sharing this. Too hot for winter woolens here too, and I think this will be a winner.

    ReplyDelete
  3. I love this style. Thank you for the buttonhole info. You are right this style is perfect for seasonal transitions.

    ReplyDelete
  4. Well! that is a darn cute dress! I love the button holes. Nice job. I have patterns older than the 90's but am a bit older and there are some I have gotten rid of that I wish I still had. So don't think you are alone.

    ReplyDelete
  5. Love this dress! Your buttonholes are fantastic.

    ReplyDelete
  6. What a beautiful dress. A great look for fall, especially early in the season on warmer days. I love the red buttonholes!

    ReplyDelete
  7. The red buttonholes really make the dress! Love it! and thanks of the tip on sewing them.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: Spring is for Shirtdress

I love shirt dresses! My pattern collection reflects this (I may or may not have eight shirt dress patterns) but somehow my closet does not. I have just two DIY shirt dresses (Mimi G's Katie dress and Simplicity 8546) and maybe two RTW versions. So it's high time that I added some to my wardrobe.


This polyester blouse weight twill by Milly has the perfect weight and drape for a relaxed shirt dress. If you prefer a more structured look, stick to a cotton shirting or light weight sateen. I loved this fabric and print so much that I grabbed both colorways. Unfortunately this fabric is sold out, but you can browse other shirtings and blouse weight fabrics here.


This fabric has a somewhat slinky feel, but isn't truly slippery. There's also a slight sheen without being shiny like a satin. It was easy to cut and sew, but I did get a few snags when pinning so make sure you use sharp pins and a fresh machine needle. I serged my pieces before assembling the pattern because as m…

Fabricista Guest Post: "Julie's Picks" Goes to the Opera

Hello, fellow fabric enthusiasts and sewers alike ! My name is Mary Martha and I am thrilled to be presenting a guest post for Fabric Mart's Fabricista blog. As a bit of background, I fell madly in love with opera in 2015 when I attended my first performance in a movie theater as part of the Metropolitan Opera's "Live in HD" simulcasts, which projects live staged operas in New York City into cinemas worldwide via satellite. (They're fantastic !) Since the start, I have dressed the part of the characters when attending these performances, beginning with outfits fashioned from scarves and skirts in my mother's closet to more ornate costumes. It was during this time that I taught myself to sew using a sewing machine and I haven't looked back ─ my life was changed forever !
In December 2018, I subscribed to Julie's Picks swatch club as an educational experience: I wanted to expand my knowledge of different fabrics besides the typical polyester satins I h…