Skip to main content

Made by a Fabricista: StyleArc's Alisha Dress in Lace

I love the holidays, and even more, I love wearing something I've made. Well, this year, I decided to make a beautiful lace dress. I've never tackled a project like this, so grab a coffee or your favorite beverage, and I will walk you though my journey.  



I choose this lovely pattern from StyleArc, the Alisha Dress.  I've had my eye on this dress for a very long time but wondered where on earth I would wear it and could I create it in a way that I would be proud of? Typically I am not a fearful sewer, so I just got busy and created my dress.  

Here is the pattern description from StyleArc's site: 
A wonderful party dress complete with a slip. Use scalloped lace to create beautiful and interesting neckline. The lace edge can also be used on the hem and sleeves. This pattern can be made many ways - all lace, lace yokes & sleeves with plain body, or completely plain. The choice is yours!

Fabulous V-neck dress with slip (pattern included)



Those design lines are so pretty!  I love the separate slip cut on the bias since bias cut garments just glide over your skin and feel wonderful!  




I also really like the elbow length sleeves with the zipper back and opening at the shoulder blades to the neckline where it closes with a hook and eye.  




Since I've not made a dress such as this, I choose to make not one but two muslins and I am very happy I did so! While I typically don't hardly alter a StyleArc pattern, since this was made in lace and more delicate to handle, I knew I would get a better feel of how the garment went together through the practice-fit. I just used a lightweight gabardine to test this for my first and second muslin. 




The first time through, I made the pattern as is with my usual 1/2" swayback adjustment and also a sort of new alteration for me and that is a slight (3/8") sloping shoulder adjustment.   And, constructed the dress as the pattern was written.  Honestly, if you think about the look of the dress and read carefully, this dress will make sense.  




After the initial fitting, I decided I wanted to have more room in the torso so I took out the optional darts and felt so much better about how the dress felt and how it looked on me!  I knew I could always add the darts at a later time if needed. I also raised the back seam that runs along the shoulder blades by an inch at the center back, as I didn't want my bra to show and yes, I will wear a bra. I am 52 years old and wear a C-cup, I am assuming if you were me, you would too.  :)  I also had to take in the armscye from the shoulder seam to the underarm on the back of the dress. Maybe I have a narrow back as well?  



The second muslin fit so much better and I held my breath as I cut into the lace. Let's talk about the lace for a minute. It was so lovely to work with and I like the design that has geometric patterns in it.    




I was very leery as to how to finish off the seams so they wouldn't pull apart as some of the lace has some open places.  And, since this dress is so lovely, I am considering wearing it to my son's wedding in January.  


I plan on dancing and can you imagine if the seams popped while I was doing the hustle on the dance floor? I researched quite a bit and came up with using silk organza cut into 1/2" strips and stitching those strips along the seams.  See how nicely the seams finished off after serging?  




The organza is black, just like the lace and is barely visible. I used the organza to reinforce the zipper insertion as well but instead of the silk on one side of the seam, I put it on both. I also used the lace pattern itself to create the hems on the skirt and sleeves. I practiced a bit by cutting different parts of the lace to see what I liked and I settled on this fringe base which I created by cutting off a portion of the lace pattern.




Another concern I had was due to the construction process. The directions tell you that when you are attaching the front and back bodice, you stitch to a dot, raise your presser foot, clip to the notch, pivot the fabric and carry on. I didn't want to risk cutting too far, so I staystitched the neckline and sewed a small piece of the organza to the pivot point to reinforce it and make me feel better about constructing this dress in lace. I must admit, it worked beautifully.  



Everything was going really well but I wasn't sure how to finish off the front and back neckline and I was a little worried about inserting a zipper in the lace. Again, I looked to the lace for the answer and I cut a portion of the design off and used a very narrow zigzag to attach it to the bodice. I simply stitched slowly and followed the edge of the design. After applying the edging, I used my applique scissors to trim the excess away. The left side is before I applied the edge. The right side shows my work in process.  



I normally wouldn't post a picture of my chest like this, but it does show the neckline really well. As you can imaging, dear husband took this photo when I wasn't looking.  




The last headache I had with this dress was the zipper. As I was working with the lace, I knew a regular invisible zipper from JoAnn's or Hancock's probably wouldn't cut it due to the weight of the zip and the lightness of the dress. I predicted a big puddle at the bottom of the zip and sadly my estimation was correct. I had no idea what to do and reached out to the sewing community. An angel in disguise led me to a site that sells lightweight invisible zippers. Shipping was fast and I had the new zipper inserted in a matter of minutes and whew, no more puddles! In case you are wondering about the weight difference in a regular and lightweight zipper here it is: 



Lightweight zipper--four grams


  
Regular zipper--six grams.  Those two grams make a difference!  Trust me!  



While it sounds like this dress was a ton of work, it really wasn't. The lace was lovely to work with and it behaved just beautifully. It presses well and I am so happy with the end result.  

I almost forgot that I also made the slip as well! This is included in the pattern and I ordered this black charmeuse that was heavenly to work with. Luckily the pattern has a c-cup bodice for the slip and I made it as is. You don't need any special tools but I do have a recommendation for a bias-cut garment. Let the slip hang for at least 24 hours before hemming. If you have wonder clips, attach those every three or four inches to help the garment hand properly. If you don't have wonder clips, you could also use safety pins every few inches just a few threads up from the hemline.

  

I can't wait to wear my new lace dress!  I know, it is pretty fancy, but I think it will be perfect for my son's wedding!



Thanks for reading!




Sue @ Ilove2sew

Comments

  1. Wow this is stunning. Such a classic and classy look.

    ReplyDelete
  2. This is beautiful and it looks so expensive! Perfect for a mother of the groom dress.

    ReplyDelete
  3. Beautiful dress! Thanks for detailing the construction process for the lace.

    ReplyDelete
    Replies
    1. Thank you Levone! I am glad you found the details helpful!

      Delete
  4. Wonderful! Perfect pattern and lace. Beautifully made and very flattering.

    ReplyDelete
  5. This is beautiful Sue, just gorgeous. The edging is amazing. Thanks for sharing!

    ReplyDelete
    Replies
    1. Thank you Elizabeth! I appreciate your kind remarks!

      Delete
  6. Absolutely stunning. Sewn beautifully. Gorgeous pattern and fabric.

    ReplyDelete
  7. Oh my gosh, I am speechless! What a beautiful, beautiful dress. You look like a million bucks!

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: Milo + Citrine

Hello sewing friends! It’s Andrea - @happy.things.here on IG and today I’m on the blog to share some sew inspo on one of my favorite kinds of garments to make – cardigans! I absolutely love making them and wearing them year-round, whether it’s an extra layer for around my house in the winter, as my outermost layer in Spring and Fall, or paired with a dress on a cooler summer evening. I love love love cardigans! And there are so many great cardigan patterns out there – chances are that each of your favorite pattern companies offers multiple cardigan patterns. Button-less cardigans are great beginner patterns, and a handmade cardigan is a lovely personalized gift since it’s more forgiving for fit and you don’t have to know someone’s exact measurements to make one. And you can make them in all sorts of knit fabrics too.  Today I chose two cardigan patterns to share with you that I think bring a little something extra to the table. They are the Seamwork Milo and the Made by Rae Citrine.

Week 4: Jeansmaking- What They Made

This is it, the final round! And we certainly did not go easy on our three remaining contestants this time. This round they had to make their own pair of well fitting jeans. I think they all did an absolutely outstanding job! Take a look what these ladies accomplished & be sure to vote for your favorite! (Link at bottom of post.) And, don't forget to show us your me-made jeans on Facebook or Instagram. Details at the bottom of this post. Danesha from  Classyfied Life So first I must say that this entire challenge has been just that...a challenge! Two weeks ago there was hurricane Irma and I was blessed enough to not lose power and then I went out into the aftermath to capture some photos of my submission. Then two weeks ago I had a big trip planned so I had to do EVERYTHING  in two days . Then the BIGGEST challenge of all...THIS week! I got the challenge and I was super excited to have an extra few days and then before I could even get started I ended up in the eme

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month!  This year is the year I challenge my sewing skills.   I have wanted a moto jacket for some time.  Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one.  The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting.    Remember when I said I wanted to challenge my sewing skills?  😉 This fabric was beautiful but fragile to work with.  It was a great mental challenge that had me problem solving before sewing to avoid any potential problems.  I first traced out the pattern onto tissue paper to determine the fit.   I used scrap cotton fabric to sew up a “practice run” of the jacket.    I was pleasantly surprised at how easily the jacket comes together.   I sewed up the muslin in one evening.  It was time to cut into the beautifu