Skip to main content

Made by a Fabricista: A Fringed Tamarack by Grainline!

Maybe you've figured this out, but I really love sewing with wool, and I love making jackets. So for this month's contribution to Fabric Mart, I choose this lovely wool that has a slight hint of some sparkle in it.  I wish I could have captured it with my camera!  Trust me, the sparkle is there.


I knew I wanted to make a jacket with the lining quilted to the wool and when I came across this newish pattern from Grainline, called the Tamarack, I knew it was exactly what I was looking for!
Tamarack Jacket PDF

The style is classic, there isn't a lot of fitting, and it looks like the jacket would look great on a variety of figures. I eliminated using the batting between the lining and the wool.  Had I used a cotton or a similar lightweight fabric then I would have used the extra layer of warmth. I also thought it would be fun to use this 'suede' to trim the jacket.  I love mixing wool with other fabrics that you might not expect.


Construction of this jacket is easy-peasy and it gives you some room to play with your fabric.  I decided at the last minute to add the fringed trim to the cuffs and the neckline to give the jacket a unique look.  


To make your own fringe from wool fabric, cut strips of your fabric either on the lengthwise or crosswise grains, about twice the width of what you'd like it to finish as. On one side of the width of the fabric, stitch, sort of like staystitching. This wool was pretty ravely so I decided to serge the side that would be enclosed in the trim.  Fray the side not staystitched and trim as necessary to give you the finished width you prefer. Baste the trim to the jacket and apply the finish. In this case, my finish was bias cut pieces of the 'suede' that I cut in 2.5 inch strips. I applied the trim to the jackets right side, folded the edge to the inside and then stitched the trim by hand to the lining.


Do you have fun with lining colors?  I thought about black or gray but decided on this spring green color which is much more evident in the photo above this one. I am so ready for spring temps to arrive and this brightened my mood as I stitched the wool to the lining in a grid pattern.
  

This wool behaved beautifully!  See how nice the sleeve hangs along with how well the sleeve was set into the garment?  One thing to remember when you are working with a wool that has a novelty thread running through it is to use a press cloth so the fibers don't melt. It is a good idea to test iron a scrap of your fabric so you don't make any big mistakes on your garment!  


I love how the shoulders are slightly dropped and the easy fit of the back. The shaped hemlines are also pretty cool and lend a nice component to this jacket. I did make my standard alterations to this jacket: 1/2" swayback adjustment, 1/2" FBA, and 1/4" sloping shoulder adjustment. I am 5'7" and the jacket length and sleeve length are perfect.

 

Those welt pockets are nice and deep and in a great position on the garment. I really like them trimmed with the suede.


I needed these nice deep pockets today!  It is cold outside!


This jacket has hook and eye closures and I just laid them out how I wanted them spaced on the front.

I like my new jacket!  It is warm and comfortable and I love the fabrics I choose!

Thanks for reading!
Sue from Ilove2sew!

Comments

  1. Nicely done, looks great on you.

    Sue C

    ReplyDelete
  2. Your suade and fringe are such an improvement to the original jacket. Thank you for sharing this classic look. I really like it.

    ReplyDelete
    Replies
    1. Thank you so much mgquilts! I thought the original needed some embellishments. :)

      Delete
  3. This jacket is amazing. I really like the suede trim. It is all beautiful

    ReplyDelete
    Replies
    1. Thank you Lori! The suede was surprisingly easy to work with.

      Delete
  4. Great looking jacket. You did a good job. I may have a go at this pattern. You gave such good tips, I should be able to make one similar to yours. I love it that much.

    ReplyDelete
    Replies
    1. Hi Karen--go for it! Imitation is the best form of flattery!

      Delete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

DIY Tutorial: Infinity Scarves

Have a person on your gift list, but have no idea what to get for them? Making a gift is the perfect idea and it will be even more thoughtful than a silly little gift they don't really want anyway.
Infinity scarves are super easy and quick to make. They are called infinity scarves because they look like a continuous piece of fabric in a tubular form. You can make them in almost any type of knit. Knits come in so many different prints that you can make one for every outfit in your closet. 
Here is what you will need:  - Sewing machine - 1/2 yard of knit fabric (sweater knit, rayon knit, ITY knit, cotton knit, etc) Should also be 58/60" wide.  - Thread to match - Hand sewing needle
1) Fold the 1/2 yard piece of knit in half the long way. Pin along the entire long edge. 

2) Using a thin zig-zag stitch (almost straight stitch), stitch the long edge. I pull slightly on the front and back of the fabric as it goes through the sewing machine so that when the scarf is finished, it can b…

Made by a Fabricista: Classic Ponte Knit Pieces!

Happy Saturday All!
I am so over this heat here in South Florida!  The humidity and the high temperature feels like 100+ degrees each day.  I can't wait for Fall so that I can truly enjoy the cooler temperatures.
Whenever Fabric Mart has designer ponte knit fabric in stock and on sale, I grab as many yards as I am allowed to.  I absolutely love sewing with ponte knit versus other knits as the stability and structure are perfect for my personal taste (See my previous Fabric Mart post using ponte knit here and here).