Skip to main content

Made by a Fabricista: Parrot Green Jalie City Coat.

I go through my coat closet every year, and I always see the same thing…gorgeous coats of all sorts of colors and styles (I am definitely a coat junkie!), but one thing I definitely find lacking is good rainwear.  So when I was asked what I wanted to make for November, I toyed around with making a raincoat.  I know that the fabric that comes and goes at Fabric Mart doesn’t necessarily mean there will be the right fabric for the job, but at the moment I chose to do this project, there was an overabundance of water repellent fabric at the shop. 

This fabric is pretty special, though.  It isn’t like oilcloth, which is like a stiff, coated cotton, or like the rain resistant canvases, which can be heavy and sort of inflexible.  This fabric is a mix of poly, wool (!), and elastane, which makes it a warm (thank you wool), water resistant (poly), and exceedingly comfortable (elastane) knit fabric which is unlike any fabric I have sewn with before.  It says it has only 10% stretch across the grain, but it turns out most of its stretch is with the selvege, which means it's actually a bit like a bengaline, and cutting the pieces out with that in mind meant I had more than enough stretch (the pattern definitely mentions using a stretch fabric on its instructions).

I have seen fabrics like this used in higher end jacketing, like the kind you see used by North Face, L.L. Bean, Land’s End, and Patagonia.  I am very thrilled that Fabric Mart was selling it and that I could have a few yards of it in the beautiful and bright parrot green color. 

So I had my fabric choice down, but I was stuck a bit on what coat to make.  I loved the Jalieshort jacket I made last November, so when I remembered they had the City Coat pattern that included a hood, I knew I had found my new raincoat.  I also loved the version made by my fellowFabricista, Kathy, so seeing hers I was doubly excited.

The actual construction was fairly easy, though I had a few moments of panic at the narrower 3/8” seam allowance.  On more thick fabric like this, I prefer a larger allowance so I can have more space over on my sewing machine bed under the walking foot.  I personally find it hard to watch the seam allowance under the foot and a couple of times, I noticed that the seam allowance would go from 3/8” to ¼” because I couldn’t keep track of its movement.  I prefer 3/8” as a rule, for most things, but in this case a 5/8” allowance would have been better for the job.

I also noted there was a lot of topstitching, but unlike my red coat I made last winter, this coat’s topstitching was a lot easier (thank goodness!).

The biggest problem I found was the time it took me to trace, lay out, and cut out the pattern pieces.  And because I underlined the coat in a poly stretch satin, I had to cut out those pieces, too.  The seaming makes the fit amazing, though, so it is worth all the time, but I was sucked into the vortex of pattern cutting for a really long bit over the past few weeks.

I initially intended to create the whole coat on the serger, but in the end the sewing machine served my purposes just fine.  I still had plenty of stretch, even using a straight stitch (I made sure to gently stretch the fabric as it went under the needle).  To make sure the stretch was in the hem, I hand-stitched that with great success and it is very stretchy.

I think the pockets could be potentially very tricky, but I think if you can see the pattern pieces as a puzzle that fits together, it will make them easier to attach to the body pieces and to each other.  I wouldn’t say the directions are especially good at guiding you through the process.  They are fine, but I used my spatial abilities to help me there. 

The sizing was interesting.  With my short jacket, I had to use one size at my shoulders and bust, and another at my hips, but I was very nervous that the size I picked for my hips and bum on this coat would be too tight.  I went with an S at the shoulders and bust, sized out to a T at the waist, and out to a U at my hips and bum.  Those were perfect!  Now, I chose not to make buttons and buttonholes, so I didn’t have the same center front as would have been on that version, but the difference would be off only a bit, so I think I chose the right size, even if I had chosen the button closure.

The zip is a double-ended zip, which is my most favorite to use, since I can unzip from both ends for comfort.  I used a 30” lime green one, and it works, even though it clearly is a brighter and more citrus version of a green. 

Speaking of color, I adore this apple green color (or grass green or parrot green).  I think it is one of the best colors for my coloring.  I wear a lot of these bright, clear colors, and so I think I truly am a clear spring, which is one of the seasonal types, for those of you out there who like learning about things like that.  It also means I can’t really wear the dusty lavender colors, but that’s fine.  I’ll admire how good that color looks on other people.

The color of this is brighter outside, the color inside is more what it looks like.  :-)
I wore it last Thursday, and it was a success.  The hood kept the wind off of my head.  The underlining and the warm layer of wool kept me warm.  The elastane meant I could put it on and take it off without a struggle.  And as far as water resistance?  Well, it was sunny today, but when pressing it (btw, a challenge with this fabric, it didn’t really like being pressed!), many drops of water got on the fabric’s right side, and they just beaded up and could easily be brushed off by my hand.  It was cool.  Like a science experiment.  I know it will do well in rain. 

Have any of you made anything from this kind of fabric?  I would love to know what you’ve made.  I have a coworker who also loves this color and I have a bit of the fabric left and I really want to make her something.  Maybe a rainhat?

Have a great day!  Stay dry! 

Dina—My Superfluities


Comments

  1. So cool to see this made up - I've been planning to make this same coat with this same fabric!

    ReplyDelete
  2. I made this coat in a fleece powerstretch it is warm and waterproof. I love your version, especially with the zip!

    ReplyDelete
  3. Super cute coat, and yes, that is a fantastic color on you! I think a rainhat would be a great gift for your coworker. I made a raincoat from this too, and am really impressed with how great the water sheds from the surface.

    ReplyDelete
  4. I plan on making this with Polartec Powershield, Can't wait!

    ReplyDelete
  5. Love it!! The fabric and shape of the fabric look good and I love the color!! Perfect coat for a brisk fall day!

    ReplyDelete
  6. Love that shade of green! Nice rainwear jacket

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Pattern Emporium’s Lyrical Top Featuring Fabric Mart Fabrics

 Sewn in a lightweight  rayon challis , this top combines style, comfort, and fluidity. There’s one thing I love in a summer sew: effortless drape—and the Lyrical Top by Pattern Emporium delivered just that. This pattern is a new release, and when I spotted this dreamy rayon challis from Fabric Mart Fabrics, I knew it was the perfect pairing. Lightweight, breathable, and with just the right amount of movement, the fabric really brought the pattern to life. Today, I’m sharing all the details—from fabric choice and construction to styling and fit—plus a few thoughts on why this top might just become a repeat sew. Pattern Overview: The Lyrical Top by Pattern Emporium The Lyrical Top is a relaxed-fit design with bloused sleeves and a gently flared frill cuff. It comes with three sleeve lengths and two neckline variations. I chose the tie-neck view, but there’s also a collar option for a slightly different vibe. I’ve been looking to add more stylish tops to my wardrobe this year, a...

Made By A Fabricista: Oversized Jenna Shirt for Summer Fun

 I may or may not have had several meltdowns during the making of this Closet Core Jenna Shirt… But let’s back up first. During the month of May, I promised to wear handmade garments every single day for the popular sewing challenge “Me Made May.” I really enjoyed thoughtfully putting together my outfits each day. While I was doing this, I was taking notes of the gaps in my wardrobe. Particularly, I don’t have many transitional shirts that could work for on-camera work attire and be comfortable for the weekend. When I saw this delicious cotton lawn on the Fabric Mart website, I knew that I wanted to make a button up shirt that would be both work appropriate and a nice overshirt for summer evenings over my tanks and tees.  I have made a few button up shirts before using a vintage Stretch & Sew pattern but I decided to try my hand at the Closet Core Jenna Shirt (up to a 60” chest) which has had rave reviews on social media and pattern sites for being a great pattern with e...

Made By A Fabricista: A matching set and a happy error.

 Hi sewing friends! Today I’m sharing a new outfit I made inspired by looks I’ve been seeing pop up in my Facebook and IG feeds a LOT this year. I’m talking about those monochromatic matching top and bottom outfits, sometimes in linen, sometimes in a flowy knit - the ones that advertise they go effortlessly from loungewear to office wear to going out wear. So I decided to “sew the look” using Fabric Mart fabric and a few patterns I already in my massive pattern library. First, let me share that I have very few solid color pieces in my closet. I’m so taken in by whimsy and geometric prints that this is still a gaping hole in my wardrobe -  a matching solid color set was actually a practical addition for me.  So let me walk you through how I created this look, and also tip you off to an error I made while cutting that worked out pretty well after all. Can you spot the error? Hint - it’s somewhere in the top: Here’s how I went about building my matchy match outfit. And here’...