Skip to main content

Made by a Fabricista: Striped Duster


Have you ever run out to buy a pattern with the intention to make it right away, but then you get side tracked and days become weeks that become months? Well, that is what happened with early fall pattern, Simplicity 8177. I purchased this pattern this summer with plans to make it right away for the fall, because I love dusters. Whelp, that didn't happen, but I did finally sew it up this week. Even though I'm a season behind, I'm calling this a win, because it didn't get pushed back into next year.



I originally selected a brown and orange tweed wool suiting for this project (here), but then this navy and cream striped suiting (here) arrived and I quickly switched to it. I love, Love, LOVE stripes, my stash proves it. What I always forget when buying striped fabric is the added work of matching stripes when sewing. LOL. It is not difficult but it does take time. Sadly time is what I was short on due to some delays with FedEx (not Fabric Mart's fault). The stripes don't line up as nicely as I would like in a few places, but I have a finished coat to show you!


The stripes are about 1" wide and I think its the perfect scale for this duster. I didn't have any trouble sewing with it, but it is a boucle and prone to tons of fraying. I serged all of my raw edges except for the bottom hem. This suiting is fairly lightweight and I was concerned initially about using it for this project, but in the end I feel it worked especially for fall or warmer winter days.


This was a straight forward sew as there is no collar or fasteners. The two piece sleeve did add an additional seam which meant more stripes to match. One arm is off ,but I didn't have the time or the patience to correct it as I didn't notice until I had attached it to the body. 



I decided to add a lining for a more finished look. I created the lining by cutting out the front, back and sleeve pieces and then tracing the facing pieces on the front and back pieces. I then added 5/8" seam allowance outside of that traced line and removed that portion to account for the facings. After sewing the lining pieces together I attached the raw edge to the facing of the jacket right sides facing.


I hemmed the sleeve lining and sleeve separately and then hand stitched the lining to the stitch line of the jacket I had planned on using the same method to finish the hem of the coat but somehow my lining was much shorter than the jacket. I'm not sure how that happened, maybe I was sleepy when I cut the lining. I had a bit of trouble with the vent and the lining. This led me to run out and buy double fold bias tape to enclose the raw edge of the hem. I simply did a narrow hem on the lining fabric.


The vent of the coat was no issue but I wasn't sure how to work the lining into the vent. So I sort of made this part up. I sewed the vent of the duster as instructed and then simply folded back the vent on both side of the lining. It doesn't show but I know this is not the correct way. I will be researching a proper way for the future, but for this project I made do.


I did omit the flaps because I don't quite get the "faux flaps"and the stripes are busy enough. I really like this duster and the only change I would make in the future would be to lengthen the sleeves by an inch and make the pocket larger. This pocket is teeny. Maybe I shouldn't have used a 5/8" seam allowance but even if I had made the seam narrower I still believe the pocket isn't deep enough. I will fit my large Samsung S7 but my hand does not fit comfortably. Then again I do have big hands.
I will make the project again, though I don't know when. I have such a long list of projects to sew over Christmas.


Check out my blog for a full pattern review and more pictures! TipStitched


Comments

  1. Wear your duster with pride! It is very nice....As sewists we know our imperfections that the average person wouldn't notice. I couldn't tell that the strips were a little bit off until you mentioned it. I love how you paired the duster with jeans and the red shoes. I don't know how I missed this pattern. I need to put this one on my pattern shopping list.....

    ReplyDelete
    Replies
    1. Thank you, I will. We (sewists) are definitely our own biggest critics. The navy stripes lended themselves to be paired with my dark denim trousers and I had to do red for the holidays!

      Delete
    2. Thank you, I will. We (sewists) are definitely our own biggest critics. The navy stripes lended themselves to be paired with my dark denim trousers and I had to do red for the holidays!

      Delete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Recent Posts You Might Like

Return to work wardrobe in ITY – which is your favorite?

In June of this year, after spending nearly 11 years at my place of employment and after restructuring and cost cutting, I took a separation package. I was so fortunate to be able to take a few months off, and also to very quickly find a position with a new company. I start my new job on September 14th and I’m super excited!  This new position is also different for me in that it is local to my area (whereas before I worked remotely and traveled to the office every few weeks) – so I’ll be going into the office three times a week. So of course I needed to sew up some new outfits! I’m a huge fan of ITY knit fabric ; ITY stands for interlock twist yarn, which describes the way the yarn is knitted together. I love it for tops, dresses, skirts, and even pants: it’s comfortable, easy care, low wrinkle, and comes in so many beautiful prints. I sewed up three new outfits over the last two weeks and I’m excited to share them with you today! Oh, and also – I need help choosing what to wear fi...

Sometimes The Fabric Chooses The Pattern

Have you ever fallen in love with a fabric and immediately envisioned exactly what you wanted to make, only to realize halfway through the planning process that the fabric had other ideas? That’s exactly what happened with this project. I used Fabric Mart’s Black/Dark Cobalt/Smoky White Poly Foliage Print Chiffon , and while I initially had plans for a detailed dress, the fabric ultimately led me in a completely different direction—and I’m so glad it did. When I first saw this gorgeous chiffon print, I was immediately drawn to the rich color palette and beautiful movement. The dark background paired with the cobalt and smoky white foliage creates a striking look that feels both dramatic and versatile. My original plan was to make a dress with princess seams, buttons, and more structured design elements. However, after spending time with the fabric, I realized that all of those seam lines and construction details would compete with what makes this chiffon so beautiful: its drape, moveme...

Hillhouse Nap Dress Dupe with Fabric Mart Fabric!

I have been wanting a Hill House Home Nap Dress for the longest time, but when I saw the reviews that the fabric was too sheer and the price tag—often well over $200—I decided it would be much more fun to make my own! I found this gorgeous abstract navy and white cotton voile from Fabric Mart and knew it would be perfect for the light, floaty dupe I had in mind. Cotton voile is soft, lightweight, and beautifully suited for a shirred dress like the infamous Nap dress. This abstract print gives the finished dress a more modern feel. I love a floral fabric, but I was excited to find this abstract print in my favorite color of navy.  Rather than using an entire dress pattern, I followed Just Lauren Johnson’s YouTube tutorial on how to create a Nap Dress from rectangles. Lauren walks you through how to use your own measurements to calculate the dimensions of the bodice, skirt tiers, and other pieces. I loved this approach because I could create the dress specifically for my measurement...

Sewing With Intention: New Look 6106 and a More Coordinated Wardrobe

Sometimes a sewing project begins with a beautiful piece of fabric or a pattern you just have to make. This one began with my closet. Recently, I did a major closet purge. I took a good look at what I actually wear, what I kept reaching for, and—maybe more importantly—what was missing. Once the pieces I no longer loved or wore were gone, something became very clear: I want to be more intentional about what I sew next. Instead of sewing individual pieces that I love but don't necessarily wear together, I want to build a wardrobe where my handmade garments coordinate with the clothes I already own—and with the pieces I'm planning to sew next. For this month's Fabricista project, this beautiful lightweight shirting from Fabric Mart turned out to be a wonderful place to start. The Fabric That Started It All Fabric Mart provided this beautiful oatmeal and black heathered shirting , along with the matching thread for my project. One of the things I love most about this fabric is ...