Skip to main content

Made by a Fabricista: Striped Duster


Have you ever run out to buy a pattern with the intention to make it right away, but then you get side tracked and days become weeks that become months? Well, that is what happened with early fall pattern, Simplicity 8177. I purchased this pattern this summer with plans to make it right away for the fall, because I love dusters. Whelp, that didn't happen, but I did finally sew it up this week. Even though I'm a season behind, I'm calling this a win, because it didn't get pushed back into next year.



I originally selected a brown and orange tweed wool suiting for this project (here), but then this navy and cream striped suiting (here) arrived and I quickly switched to it. I love, Love, LOVE stripes, my stash proves it. What I always forget when buying striped fabric is the added work of matching stripes when sewing. LOL. It is not difficult but it does take time. Sadly time is what I was short on due to some delays with FedEx (not Fabric Mart's fault). The stripes don't line up as nicely as I would like in a few places, but I have a finished coat to show you!


The stripes are about 1" wide and I think its the perfect scale for this duster. I didn't have any trouble sewing with it, but it is a boucle and prone to tons of fraying. I serged all of my raw edges except for the bottom hem. This suiting is fairly lightweight and I was concerned initially about using it for this project, but in the end I feel it worked especially for fall or warmer winter days.


This was a straight forward sew as there is no collar or fasteners. The two piece sleeve did add an additional seam which meant more stripes to match. One arm is off ,but I didn't have the time or the patience to correct it as I didn't notice until I had attached it to the body. 



I decided to add a lining for a more finished look. I created the lining by cutting out the front, back and sleeve pieces and then tracing the facing pieces on the front and back pieces. I then added 5/8" seam allowance outside of that traced line and removed that portion to account for the facings. After sewing the lining pieces together I attached the raw edge to the facing of the jacket right sides facing.


I hemmed the sleeve lining and sleeve separately and then hand stitched the lining to the stitch line of the jacket I had planned on using the same method to finish the hem of the coat but somehow my lining was much shorter than the jacket. I'm not sure how that happened, maybe I was sleepy when I cut the lining. I had a bit of trouble with the vent and the lining. This led me to run out and buy double fold bias tape to enclose the raw edge of the hem. I simply did a narrow hem on the lining fabric.


The vent of the coat was no issue but I wasn't sure how to work the lining into the vent. So I sort of made this part up. I sewed the vent of the duster as instructed and then simply folded back the vent on both side of the lining. It doesn't show but I know this is not the correct way. I will be researching a proper way for the future, but for this project I made do.


I did omit the flaps because I don't quite get the "faux flaps"and the stripes are busy enough. I really like this duster and the only change I would make in the future would be to lengthen the sleeves by an inch and make the pocket larger. This pocket is teeny. Maybe I shouldn't have used a 5/8" seam allowance but even if I had made the seam narrower I still believe the pocket isn't deep enough. I will fit my large Samsung S7 but my hand does not fit comfortably. Then again I do have big hands.
I will make the project again, though I don't know when. I have such a long list of projects to sew over Christmas.


Check out my blog for a full pattern review and more pictures! TipStitched


Comments

  1. Wear your duster with pride! It is very nice....As sewists we know our imperfections that the average person wouldn't notice. I couldn't tell that the strips were a little bit off until you mentioned it. I love how you paired the duster with jeans and the red shoes. I don't know how I missed this pattern. I need to put this one on my pattern shopping list.....

    ReplyDelete
    Replies
    1. Thank you, I will. We (sewists) are definitely our own biggest critics. The navy stripes lended themselves to be paired with my dark denim trousers and I had to do red for the holidays!

      Delete
    2. Thank you, I will. We (sewists) are definitely our own biggest critics. The navy stripes lended themselves to be paired with my dark denim trousers and I had to do red for the holidays!

      Delete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: The Bernadette

Hello friends,  My Latest Fabricista Make: Friday pattern Co Bernadette Skirt x Midnight Navy Cotton/Lycra Sateen Stretch Denim Hi everyone, this is Byrd with my latest Fabricista make! When I saw Fabric Mart’s Muted Midnight Navy Cotton/Lycra Sateen Stretch Denim , I knew it would be perfect for my next project. The color is rich and versatile—a deep navy that works as a neutral but still has presence. The stretch denim has just the right balance: structure with a bit of give, making it great for a garment that needs both shape and comfort. It’s an ideal fabric for fall transitions, but it’s sturdy enough to carry straight into winter with tights and boots. For the pattern, I chose the Bernadette Skirt by Friday Pattern Company . This is one of their newer designs, and I knew immediately I wanted to sew it up. It’s a modern skirt that blends structure and style, with darts in the back and pleats in the front for a flattering fit. One of my favorite features is the belt, and of co...

Made By A Fabricista: Falling for Knits

We are now well into Fall, even though the temps are still relatively warm here in Texas.  I love the fall season and dressing for Fall.   When it comes to the conversation of knits vs. wovens I typically sew mostly wovens. So for this post I decided to sew completely knits!  With the holiday season right around the corner I saw these three dress styles as perfect for Friendsgiving/Thanksgiving gatherings.  The first look is a tried and true pattern Simplicity S9372.  Using this gorgeous burgundy ponte knit , I like how this pattern fits throughout. I chose this color to add to my typically neutral palette in my closet.  I also wanted something I could wear to my sorority meetings and found this color perfect.  It's an easy sew with back fisheye darts  and invisible zipper to add to the tapered style.  The neckline and armholes are finished with bias binding giving it a clean finish on the inside.  I used a universal needle to sew a...

Made By A Fabricista: The Art of the Slow Make: My La Forme Double-Breasted Jacket

I started this project back in July — one of those mid-summer sewing plans meant to get me ahead for fall. My idea was simple: start my wardrobe a season (or two) early so that when cooler weather came, I’d already have a few handmade pieces ready to wear. That was the plan, anyway. But as sewing often reminds us, plans evolve. This jacket, made using La Forme pattern No. 0303, is a double-breasted design with peak lapels and an exaggerated hip detail that gives it such a striking silhouette. I fell in love with the structure of the pattern right away — it has that timeless, tailored feel I can never resist — but it also asked for patience. I picked it up and put it down several times over the months, letting it rest while I worked on other projects, until finally, the timing felt right to bring it to life. And now, here we are — the leaves are turning, there’s a chill in the air, and some parts of the country are even seeing snow. My summer-started jacket is finally finished, and it c...