Skip to main content

Skirt Challenge: Designer Box Pleat Skirt

I wanted to make the Skirt Challenge a true "challenge" for myself. I like the look of a box pleat skirt, but I'm not sure it always looks great on me. As most women would say, they don't like drawing attention to their midsections. Box pleat skirts pretty much do just that. But I decided that I was still going to give it a try and with some tweaking and correct placement of the waistline, I could really achieve a good look.


I really didn't want to go out and buy a skirt pattern because I have so many patterns already! I knew I had to have something in my stash that would work. I found Simplicity 2588, a discontinued Project Runway dress pattern. The skirt portion looked like what I was going for. There wasn't a waistband piece, so I made my own and made it a few inches longer than where I wanted the skirt to sit on me. I tried it on in the place I wanted the skirt to sit and marked it. I added a 2" tab. Because I was adding an invisible zipper I had to add a tab so that I could securely close the waistband. 

Here is the finished waistband. I sewed the waistband to the top of the skirt, then hand stitched it in place.


I used a 100% silk twill from Thakoon. It was a small cut I found during a buying trip to NYC, so we never had it available. Sorry! I had never worked with silk twill before and quickly realized a few things. 

- Silk twill frays! I tried finishing the seams with my serger, but between something being wrong with my serger and the fabric, it didn't pan out so well. I plan on going back and finishing the seams with a hong kong seam. I guess I could have lined the skirt  to help with the fraying. I'll at least be wearing a slip with it.

- Silk twill snags! And when the fabric has a print you notice it even more. Make sure you have a sharp needle. I used a Microtex sharp needle 70/10.  You can see what I mean below:


Other than those two things, it's easier to work with than silk chiffon or other delicate silks. Yes it's still delicate, but the weight of a silk twill makes it easier to work with. It holds a great pleat which is really good too! 

You can see the pleats pretty well in these photos. I gave them a good press with the iron, on the silk setting and steam. I LOVE steam. I don't iron without it. 

I don't think the skirt is too boxy. If I placed the waistband lower, like a low-rise pant, it would have looked boxy. It is pretty much at the smallest part of my waist so that the rest of the skirt glides over my hips. 



A look at the back. 


I'm excited to wear it this summer! What type of skirts have you been sewing? Share them with us on Instagram or Facebook using #sewcoolskirts and tagging us. You could win a $50 to Fabric Mart and other fun prizes. The challenge will run through the end of May. 

Happy Sewing!
~Julie

Comments

  1. What a beautiful skirt. It pressed beautifully and the print is gorgeous!

    ReplyDelete
  2. Beautiful skirt! I'm a huge silk fan :) but I've never worked with Silk Twill - gorgeous and drapey.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Closing 2025 with a Lined Jacket

Hello again, sewing friends! It seems we have arrived yet again in the grandest season for layering, all this oncoming cold weather. I like ending the year with something warm and very useful. Seems based on my past Fabricista posts, I love to sew year-end outerwear, and this round is no different!  I challenged myself with a new lined coat (wait, jacket? Coat? I feel like the presence of wool changes things?). Anyhoo, since the lovely Chalk & Notch Den Jacket has been in my queue, I proceeded ahead. I like the large pockets, the option to line or not, and the extra bodice and sleeve seams for topstitching.  Sewing this coat is not at all difficult, but the many pieces and loads of topstitching will take a bit of time. My version took me a few multiple-hour sessions to complete. I sewed a size 2, which matches my measurements, and I made no alterations. Hint: for a quick size test, just employ the lining pieces.  Gorgeous, muted blue as a soft wool flannel ? This is ...

Made By A Fabricista: Sheer Elegance and Everyday Comfort with my Two New Tops

Hello Sewing Friends! It’s Sharon from Sharon Sews with my last Fabricista make for 2025. While many sew a special holiday outfit at year’s end, I went in another direction sewing two tops that couldn’t be more different. One is sheer and elegant while the other is easy comfort for everyday wear.  These tops reflect how I dress at this stage of life. As an over-50 sewist, these two tops reflect how I dress at this point in my life.  Sometimes I want something a bit special, other times more basic. Either way, sewing them in beautiful fabrics, custom fit to my body, makes all the difference in how I feel when I wear them. Even though I’m quite pleased with my two tops, my original plan was to sew a jacket with the tropical print stretch twill and pair it with a top sewn from the soutache mesh knit . Sadly, I wasn’t quick enough to get enough of the stretch twill to make a jacket, so a top it was!  You do know you have to act fast when you see something you love on Fabric ...

Made By A Fabricista: Chalk and Notch Wren Dress: My Buffet dress for the Christmas season!

  I recently sewed the Chalk and Notch Wren dress using a beautifully soft black voile from Fabric Mart, and it turned into such a satisfying, enjoyable project. The pattern itself is very easy to understand and straightforward with clear instructions, intuitive construction, and a relaxed fit that makes the sewing process easy. A buffet dress in the sewing community is a dress that is loose fitting, so you can eat at the buffet without your dress being uncomfortable afterwards, lol! Because the voile I chose is extremely thin and transparent, I opted to line the bodice and first tier. Adding a lining not only provided modesty but also gave the delicate fabric a bit more stability, especially around the neckline and button placket. A helpful tip when sewing a lining into a lightweight bodice is to treat the lining and the main fabric as one. I sewed the bodice as you would for a lined bodice, and the first tier I sewed the pieces together with a basting stitch to make the process...