Skip to main content

Made by a Fabricisita: Winter (Navy) Blues

I hope everyone has enjoyed this holiday season with family and friends. For those who have suffered a loss, bad times or any other difficulty I hope that you found comfort during what may have been a difficult time. I was fortunate to spend some time off with my immediate family and reach out to those who are further away. Now the countdown is on to the New Year.


I'm so excited to share my latest project with you, because this Clare coat is my very first *REAL* coat. Sure I've made several bomber jackets and a few knit cardigans, but not a wool, fully lined coat like this one. I'm so proud of it, I've been wearing it everywhere.


This pattern is great pattern for a first time coat maker. There are several pattern pieces, a ton of interfacing and dozens of steps, but as expected with indie patterns the instructions and illustrations are very clear and as an added bonus Heather offers a detailed sewalong on the Closet Case blog.


The recommended fabrics include medium to heavyweight coating fabrics, such as melton, felt, tweed or boiled wool so I chose this Navy Wool Melton Coating. Unfortunately this fabric is sold out but there are several wool options in the coating category. After debating the color I settled on this gold crepe backed satin for the lining.


I choose View B mainly because I didn't have the horsehair canvas that View A requires, but I also thought it would be a little more forgiving as far as fit since I didn't plan on making a muslin. Based on the finished measurements I selected a size 16 and it fits well, my only issue is under the arms where I could use a little more ease.


On to the construction, I decided to fully interface all of my outer pieces and figured it would be quickest to block interface my wool. I did this by laying my weft interfacing  fusing side down on the wrong side of my wool and spot fusing every foot or so all over my fabric. Then I cut and marked all nine of the main pattern pieces, which honestly seemed to take forever, but it was worth it in the end. I saved cutting the lining for later (except for the pocket lining which you need for the outer shell construction).


The first steps are simple and typical for any coat (or top really) construction. One new thing for me here was adding twill tape at the underarm seam and collar seam for stability as these are high stress points on a coat. The other was bar tacking at the pocket top and bottom.


Once you assemble all the main outer shell you're more than halfway complete and it begins to look like a coat!


When I was researching the Clare coat pattern I noticed that both Jodi of Sew Fearless and Alison of Curate and Create added piping between their lining and facing and I feel it gives the coat an extra touch that I wanted to incorporate as well. Though in the final product I feel the red added to the gold and the navy looks a bit like a crayon box, the three primary color work well together on the color wheel and they work well here.


After adding the piping to the facing I spent another almost eternity cutting out the lining fabric and proceeded to construct the lining as instructed.


My favorite is this hanging loop because it such a small, but professional detail. I also added my label at this stage to avoid hand sewing later.


Finally it was time to attach the lining to the shell of the coat. This is the only place were I could see someone getting lost if she/he has never bagged a lining before. Attaching the sleeves seems strange the first time you do it (I learned this trick previously when lining my bomber jackets), but it really does work.


I was so excited that I actually wore my coat to work before even adding the snaps because I just couldn't wait. I debated going with a exposed zipper (an option shared on the Closet Case blog) but I'm glad I stuck with the snaps. I used 5 size 10 gold sew on snaps that I spaced about 6" apart.


I am simply ecstatic about my new coat and I'm sorta sad it took this long for me to make one. I'm also sad for probably the first time that we don't get many days here in the southeast that are cold enough to wear this coat. Thankfully, we hardly ever have weather cold enough to require interlining my coat. I'd love to make View A (probably next year) with a bright color wool like yellow or Pantone's new color of the year ultraviolet.


I think I've caught the coat making bug! What's your favorite coat pattern?

See ya next year!

Tiffany
TipStitched

Comments

  1. Lovely coat and it looks fabulous. Worth the time and much effort it took to complete. Looks great on you too. Way to go. Happy New Year to you and yours!

    ReplyDelete
  2. Cute!!! I'm sewing the Clare next month, then a navy coat(!) from Burda, then a trench! :)

    Love the color of his fabric and it looks great on you!!

    ReplyDelete
    Replies
    1. Can't wait to see yours! I think I may be ready for a trench, I'll add that to the list.

      Delete
  3. I think I like this coat pattern! Well done and nicely detailed on the blog. Maybe you could make it in a little lighter fabric and interline it with fusible interfacing to make it drape more like coat fabric and make another one more in line with your weather.

    ReplyDelete
    Replies
    1. Great, you should definitely try it. I definitely want to make View A as well so maybe I'll use a lighter fabric for that one.

      Delete
  4. What a beautiful coat. A coat that can be worn for years to come. Happy New Year!

    ReplyDelete
  5. You have convinced me to try this pattern. This is not what I thought it would look like on. I like it! I have wool waiting to be made into a coat. Thanks for the push. Nice job.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: A Wardrobe Staple for Spring - A Denim Coat

Hello Sewing Friends! It’s Sharon with Sharon Sews with my latest Fabricista make – a denim coat  for spring.  Denim is a wardrobe staple for many of us, and even more so this year with denim on denim looks coming back in style.  The denim I used is a medium weight cotton/lycra blend with about a 20% stretch selvage to selvage.  Fabric Mart always does an amazing job photographing and describing their fabrics, yet I still gasped in delight when I opened the package containing my denim.  It was even better than I had anticipated. This fabric would have worked well for a traditional denim jacket – one with button front closure, chest pockets with flaps, and a collar.   However, I have wanted to sew this open front coat with kimono inspired sleeves and big patch pockets since February 2021.  I saw it in that month’s  BurdaStyle Magazine, bookmarked the page, and promptly forgot about the coat.  It’s coat #105 if you’re interested in sewing one for yourself. Fortunately, I went on an organ

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month!  This year is the year I challenge my sewing skills.   I have wanted a moto jacket for some time.  Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one.  The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting.    Remember when I said I wanted to challenge my sewing skills?  😉 This fabric was beautiful but fragile to work with.  It was a great mental challenge that had me problem solving before sewing to avoid any potential problems.  I first traced out the pattern onto tissue paper to determine the fit.   I used scrap cotton fabric to sew up a “practice run” of the jacket.    I was pleasantly surprised at how easily the jacket comes together.   I sewed up the muslin in one evening.  It was time to cut into the beautifu

Made By A Fabricista: My Version of the Infamous DVF Wrap Dress

Just in case you are not aware, the iconic Diane Fustenberg wrap dress has turned 50 this year.  In celebration, Vogue has re-released the DVF Wrap Dress pattern, which now comes in extended sizes.  This dress is so classic and fits many different body types.  I got a hold of this pattern and decided this would be my birthday dress this year. This pattern is categorized as a Very Easy Vogue pattern, and I would have to agree with that. Wrap dresses are usually relatively simple to put together since there aren’t that many pattern pieces to sew together. I made View A in a size 22 and the only modification I made was to shorten the hem by 6 inches.  I will say that since I used a Ponte Knit , I could have gone down to a size 20.  I didn’t read the fabric suggestions before picking my fabric.  I’ve always remembered seeing the DVF Wrap dress in knits. After reviewing the fabric suggestions, they do say that you can use soft fabrics, like a Challis or a Chambray. As I mentioned, I’ve alwa