Skip to main content

Made by a Fabricisita: Winter (Navy) Blues

I hope everyone has enjoyed this holiday season with family and friends. For those who have suffered a loss, bad times or any other difficulty I hope that you found comfort during what may have been a difficult time. I was fortunate to spend some time off with my immediate family and reach out to those who are further away. Now the countdown is on to the New Year.


I'm so excited to share my latest project with you, because this Clare coat is my very first *REAL* coat. Sure I've made several bomber jackets and a few knit cardigans, but not a wool, fully lined coat like this one. I'm so proud of it, I've been wearing it everywhere.


This pattern is great pattern for a first time coat maker. There are several pattern pieces, a ton of interfacing and dozens of steps, but as expected with indie patterns the instructions and illustrations are very clear and as an added bonus Heather offers a detailed sewalong on the Closet Case blog.


The recommended fabrics include medium to heavyweight coating fabrics, such as melton, felt, tweed or boiled wool so I chose this Navy Wool Melton Coating. Unfortunately this fabric is sold out but there are several wool options in the coating category. After debating the color I settled on this gold crepe backed satin for the lining.


I choose View B mainly because I didn't have the horsehair canvas that View A requires, but I also thought it would be a little more forgiving as far as fit since I didn't plan on making a muslin. Based on the finished measurements I selected a size 16 and it fits well, my only issue is under the arms where I could use a little more ease.


On to the construction, I decided to fully interface all of my outer pieces and figured it would be quickest to block interface my wool. I did this by laying my weft interfacing  fusing side down on the wrong side of my wool and spot fusing every foot or so all over my fabric. Then I cut and marked all nine of the main pattern pieces, which honestly seemed to take forever, but it was worth it in the end. I saved cutting the lining for later (except for the pocket lining which you need for the outer shell construction).


The first steps are simple and typical for any coat (or top really) construction. One new thing for me here was adding twill tape at the underarm seam and collar seam for stability as these are high stress points on a coat. The other was bar tacking at the pocket top and bottom.


Once you assemble all the main outer shell you're more than halfway complete and it begins to look like a coat!


When I was researching the Clare coat pattern I noticed that both Jodi of Sew Fearless and Alison of Curate and Create added piping between their lining and facing and I feel it gives the coat an extra touch that I wanted to incorporate as well. Though in the final product I feel the red added to the gold and the navy looks a bit like a crayon box, the three primary color work well together on the color wheel and they work well here.


After adding the piping to the facing I spent another almost eternity cutting out the lining fabric and proceeded to construct the lining as instructed.


My favorite is this hanging loop because it such a small, but professional detail. I also added my label at this stage to avoid hand sewing later.


Finally it was time to attach the lining to the shell of the coat. This is the only place were I could see someone getting lost if she/he has never bagged a lining before. Attaching the sleeves seems strange the first time you do it (I learned this trick previously when lining my bomber jackets), but it really does work.


I was so excited that I actually wore my coat to work before even adding the snaps because I just couldn't wait. I debated going with a exposed zipper (an option shared on the Closet Case blog) but I'm glad I stuck with the snaps. I used 5 size 10 gold sew on snaps that I spaced about 6" apart.


I am simply ecstatic about my new coat and I'm sorta sad it took this long for me to make one. I'm also sad for probably the first time that we don't get many days here in the southeast that are cold enough to wear this coat. Thankfully, we hardly ever have weather cold enough to require interlining my coat. I'd love to make View A (probably next year) with a bright color wool like yellow or Pantone's new color of the year ultraviolet.


I think I've caught the coat making bug! What's your favorite coat pattern?

See ya next year!

Tiffany
TipStitched

Comments

  1. Lovely coat and it looks fabulous. Worth the time and much effort it took to complete. Looks great on you too. Way to go. Happy New Year to you and yours!

    ReplyDelete
  2. Cute!!! I'm sewing the Clare next month, then a navy coat(!) from Burda, then a trench! :)

    Love the color of his fabric and it looks great on you!!

    ReplyDelete
    Replies
    1. Can't wait to see yours! I think I may be ready for a trench, I'll add that to the list.

      Delete
  3. I think I like this coat pattern! Well done and nicely detailed on the blog. Maybe you could make it in a little lighter fabric and interline it with fusible interfacing to make it drape more like coat fabric and make another one more in line with your weather.

    ReplyDelete
    Replies
    1. Great, you should definitely try it. I definitely want to make View A as well so maybe I'll use a lighter fabric for that one.

      Delete
  4. What a beautiful coat. A coat that can be worn for years to come. Happy New Year!

    ReplyDelete
  5. You have convinced me to try this pattern. This is not what I thought it would look like on. I like it! I have wool waiting to be made into a coat. Thanks for the push. Nice job.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: Preparing for the Holidays

Hard to believe the holidays are fast approaching and in six weeks we will welcome a new year!  I am determined to celebrate in a big way!!!   I picked Vogue V1722 by Designer Nicola Finetti for its statement bodice and statement sleeves. Yes, indeed, I am loving its close-fitting bodice, plunging neckline, balloon sleeves, and flared skirt.  I dared to make this special dress in Fabric Mart’s embroidered silk dupioni, a fabric I had not sewn before. I did not prewash the silk dupioni as dry cleaning will be my method of care for the finished garment. I underlined the bodice with prewashed black cotton batiste from my stash instead of the suggested interfacing. Though not called for by the pattern, I also underlined the skirt the same way to minimize wrinkling when I wear it. I prewashed black silk charmeuse (from Fabric Mart) to use as lining. Then I lined the balloon sleeves with champagne colored organza from my stash to give it more body. For the hem band, I used French fuse as int

Past Fabricista Guest Post: Classic Basic Pieces made with Ponte Knit

Happy Friday All! I am ecstatic to be guest blogging today and sharing a few basic pieces that I made.  I truly enjoy the creative process of sewing but writing a detail blog post has been quite challenging the past few months.  Hopefully after this one, I will find more time to document my creations as it helps going back and reading how I created the look.     I have been wanting to create a few basic pieces but kept procrastinating as it is often times cheaper to buy than make.  This summer, I have been truly disappointed with the quality of the tank tops in the department stores and I skipped buying them.  I have been eyeing the ponte knit section for a while on Fabric Mart to buy more colors to add to my stash.  When I saw the beautiful range of colors that were available a month ago with various shades of nude, I knew a few yards wouldn’t hurt my pocket.  I absolutely love the quality of ponte knit that is sold at Fabric mart, especially the rayon/nylon/lycra blend . I decided t

Made By A Fabricista: Winter Poncho

Hello Everyone, Today’s post is all about my new fall/winter layering piece: a poncho with tasseled hem. The Fabric. I selected a heavy weight wool/polyester chunky knit sweater. The fabric is a plaid print with colors perfect for the winter season. It has a one way stretch and nappy textured. The Pattern. I used McCalls 8241 for this project. It is a knit poncho with wide sleeve bands and options for turtleneck, crewneck, cropped, shaped or  tassle hems. I made view C without the turtleneck detail. I modified it by skipping the sleeves, it would have been too thick trying to sewing multiple layers. The Sewing Process. This poncho sewing process was relatively easy and straightforward. I decided to omit the sleeves portion as it would have been too bulky to sew with the weight of the fabric. I made tassels using knitting yarns and attached it to the hem of the poncho. Since I had extra fabric left after cutting the poncho, I used the rest to cut a long chunky scarf. The Styling. For th