Skip to main content

Made by a Fabricista--playing with plaid shirting

Do you have fabrics that simply make you happy?  For me, it depends on the season and the colors.  In the fall and winter, I simply love plaid.  To me they speak of giving warmth, are cozy, and the colors are fun.  And, if you have seen some of my makes before, I gravitate towards red, black and white.  This plaid was the perfect choice.  Plus that turquoise blue is awesome!


It takes a little bit of practice to match plaids at critical points such as the center front, center back, shoulders, arms, etc.  Here are some tips I have found from trial and error. 


Depending on the style of your garment, it is super important the center front matches.  I always purchase extra fabric for matching plaids.  You just never know when you might have a mishap...


When working with plaids, find out whether your plaid is even or uneven.  If you fold back a corner to make a 45 degree angle, you will know.  If the pattern matches, it is even, if it looks like mine, it is uneven.  


I just love using vintage sewing books for reference on sewing fabrics that aren't on my sewing table daily.  This one is great for an explanation on how to sew plaid fabrics.  You must match the pattern within the seam lines, not the pattern edges.  It will make a difference, trust me. :)  


What you can see here is that I cut my plaids in a single layer.  I draw pencil lines on the pattern pieces where the designs need to match. In this case, I drew where the bold white lines intersected with a pencil so it is super hard to see in this photo.  


You'll want to make sure your seam lines match a critical points such as the shoulder seams, center front and back, down the sleeves, etc.  Sometimes I sort of 'cheat' and cut pieces on the bias to add a bit of drama and so that I don't have to have everything match.


My collar and center of the back yoke match, along with the shoulder seams, side seams, and center front.


Is that little loop a fun detail?  I had to add it.  I just had to.


My chosen fabric is a cotton shirting and since it is rather lightweight, to give the hem line just a bit of heft to help it hang properly, I cut bias strips to add to the hemline.  I turned it to the inside and top-stitched on the outside.  


On the inside cuff, I trimmed away the sleeve seam allowance, turned in the cuff allowance and top-stitched to finish off that seam.  I like how nice can clean the finish is.


Here is an area where I 'cheated' on matching the plaid.  I very simply cut the pocket on the bias.  I like the visual interest it gives.




Down the center sleeve, when I first laid out the pattern and decided which seam was dominate, this theme resonated throughout the garment.  That dominate part of the pattern became the center of the sleeve as well.  See my bias cut cuffs?  They go with the bias cut pocket.


Since this has a back yoke and a pleat, it isn't possible to have the pattern match everywhere.  I made sure my centers matched and went from there.  I did however make sure my side seams matched along with the sleeve pattern.  




I decided to highlight the red in the fabric with little red buttons.  


I really, really love this top.  I had a lot of fun putting it together.


It is always a challenge taking photos outdoors in South Dakota.  The wind just blows and blows.

Thanks for reading!
Sue from Ilove2sew!

Comments

  1. Love your plaid shirt!

    ReplyDelete
  2. Great job Sue! I love that color combination on you, and your plaid placement is perfect. And thanks for the tip on matching the plaid on the seamline, not the edges!

    ReplyDelete
  3. Wow, congratulations on your happy, well-made garment sewn from a fabric of style and colors that shows you in an outstanding way! I've seen you in your self-sewn garments for years online, admired your work always and this is the one I personally like the best on you! Thanks so much for all the tips ... I look forward to sewing my own plaid garment, greatly appreciate your sharing and anticipate warmly seeing your sewing again! Lynda from Toronto, Canada

    ReplyDelete
  4. Thanks for the great tips and reminders for sewing with plaids! I mark lines on the pattern, too, even for matching large prints. This color is especially pretty on you, and I love the idea of the bias-faced hem. Keep on sewing!

    Kathy in Arkansas

    ReplyDelete
  5. Is it best to sew plaid shirts with patterns that don't have darts or princess seams? I want to make some plaid shirts, but am stumped at how to match the plaid with shaping detail.

    ReplyDelete
    Replies
    1. Hi! For the first few plaid garments you make, I would use a simple, straight silhouette, like the one that I used. You can get the plaid to match at princess seams, but it is a lot of work and not something that you want to try if you aren't familiar working with plaids. Good luck!!!

      Delete
  6. Wow ! Thank you for giving me a little push to get back into sewing .Thanks for all your tips also .I'll have to give this a try after the holidays . Thanks again Bev

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: Comfy Palazoo Pants - Mommy and Me

Happy Saturday All! How have you been coping with this sudden change? 2020 is the year of adjustments and most of us will probably never forget due to the Covid-19. I am in the acceptance phase and the first 2 weeks were challenging for me to cope at first. I honestly adjusted around week 3 and have learned to cope and made the best out of it.


To get my daughter Arielle out of the house after not leaving for a month, I decided that I would make a few pieces that were on my to-make list and convince her to dress up so that I can shoot. She has been begging for a few palazzo pants since January and since we both have been home since March and I had no excuse, I just did it.


Arielle fell in love with the linen I used for my last Fabric Mart make in March and I had promised her that I would use the remaining linen in bright tan here to make her something.



I decided to use Simplicity 8605 palazzo pants to recreate a similar ready to wear pants she had.

It came out perfect and the size ext…

Made by a Fabricista: Flowers for spring

Hello all!  I hope this finds you well and healthy!  As I write this post, I am still WFH and still in need of COMFORT!  Know what I mean?  When I was drooling over FMs catalog and trying to pick out my fabric, I found myself ordering this gorgeous and soft double brushed poly. 
You can see the fabric I used here: double-brushed-jersey-knit Here are some lovely choices too: Double Brushed Poly Choices  Have you tried this fabric yet?  I can't think of anything softer.  


Of course then comes all sorts of dilemmas.  What do I make?  Maxi? Dress?  Tops?  Cardigan?  Pants?  I spent a good week just looking at this and finally came up with separates so I could have some ultimate comfort clothing.  I love the look of jumpsuits, but I remember back in the day getting undressed to use the restroom and that was appealing to me.  I settled for second best and made pants and two different tops.
Here's a link to the pants pattern I used: Pippa pants
And here are the two top patterns I …