Skip to main content

Made by a Fabricista: Wool/bamboo jersey knit cardigan

Helen's Closet Blackwood cardigan in wool/bamboo jersey knit

Hi everybody, it's Virginie from Jazz Couture and I'm excited to be part of the great Fabricistas team!

Here in eastern Canada, so far spring has brought us a cocktail of cold, wind and rain and it's not time yet for skirts and dresses. What I need now is transitional pieces, so for my first make as a Fabricista I opted for a cardigan and tried Helen's Closet Blackwood cardigan. Many sewists have made it since its release in spring 2017, and they definitely wetted my appetite for this pattern as there are many lovely versions of it on the internet!

Fabric:

The fabric I selected for this cardi is a wonderful wool/bamboo/lycra jersey, it's a lightweight, fine gauge knit that was just perfect for what I had in mind, i.e. a layering spring piece that is not too heavy but provides a little extra warmth on chilly days (and boy did we have a lot of those lately!).

The colour is called 'Stormy Seas' and it's still available here! It's a kind of gray with sage green undertones, a soft, flattering colour that goes with just about anything! Fabric Mart also has black and some grays available. That jersey knit is very refined and drapes beautifully. It's also very comfortable and not scratchy at all.


The colour of this wool jersey is called 'Stormy Seas'


Sizing and modifications:

This was my first time using a Helen's Closet pattern, and I selected a size small based on my measurements.  The fit is slim and it's just what I expected/wanted.

I elongated the bottom by 1 6/8''; it's not much but I think it makes the difference. As is, the proportions would have been sort of in between for my silhouette. I didn't use the cuffs for this version and instead turned a 1'' hem and finished the sleeve on the coverstitch. The sleeves are still plenty long and go beyond my wrist. I might use the cuff another time for a wintery version.


I turned a 1'' hem on the sleeve and finished it on the coverstitch


I rectified the shoulder seam as the angle was a bit weird (too forward next to the neck, and too backward at the shoulder tip).

I didn't do the pocket in two pieces as per the pattern and drafted my own pocket piece. Since I own a coverstitch, I turned a 1 1/2'' hem and finished it on the coverstitch for a RTW look.

Tip:

Which brings me to a tip I want to share with you. Patch pockets can be tricky with jersey knit material, as if you don't do anything the seams will often (if not always) come out wavy.

That tip is something I've come up with after some experiments to solve the wavy seams problem, and you might want to try it. Personally I don't fear patch pockets anymore in jersey knits, even with the most lightweight ones!

What I do is I make strips of featherweight interfacing, roughly the size of the seam allowances of the pocket (in this case 1 cm - 3/8''). I position them on the inside of the pocket and make sure to cover the seam allowance plus a little bit more.



Then I simply press the seams and topstitch on the sewing machine, preferably with a short stitch and fine matching thread if the fabric is lightweight. In this case what I had on hand is just regular serging thread, but still the result is perfectly fine. Look, no wavy seams!

A patch pocket on the Blackwood cardigan

I would also recommend that you make a test of a seam going across the grainline on fabric scraps and play with the differential feed on your serger, prior to assemble the bottom band to the bodice of the cardi. Often the fabric reacts differently when you sew it across the grain (than on the grain). I slightly decreased the differential feed on my serger to sew that seam and got a pretty even horizontal seam. Also, don't stretch the fabric when you feed it thru the serger!


Back view of the Blackwood cardigan


I think the wind made the two layers of the bottom band shift - usually I don't see those ripples!

I love my Blackwood cardigan; it's a casual layering piece and I know I'll be wearing it a lot this spring! The combination of wool and bamboo makes this jersey knit very soft and a pleasure to sew and wear.

I'll be seeing you again for another post in June - hopefully with a summery make! :-) Bye for now, and let me know if my little tip was useful to you!


Virginie

Comments

  1. Great tip re knit pockets! Thank you! I was just curious about why you wouldn't interface the whole pocket? Is it because it would make it too heavy? I often use a fusible knit tape by pellon to tape all the seams if the fabric is very drapey (like bamboo can be!) but especially across the shoulder seams. Love your blackwood and that fabric from FabricMart is beautiful!

    ReplyDelete
  2. Kathleen, I don't think interfacing the whole pocket would make it too heavy, but it would certainly stiffen it and I prefer the look of a soft pocket. Interfacing only the seam allowance does the job, plus the interfacing doesn't show on the outside. Yes, that fabric is gorgeous and I highly recommend it!

    ReplyDelete
  3. Love your cardigan. Thanks for your tips also.

    ReplyDelete
  4. A very well made cardy!
    Lee.

    ReplyDelete
  5. This is really beautiful and so well made. That sweater could be in an upscale boutique. I'm envious!!

    ReplyDelete
  6. Thank you Nancy! You could easily replicate it: Blackwood cardigan pattern + Stormy Seas wool/bamboo knit = your own cardi! :-) ...and it's an easy pattern to sew.

    ReplyDelete
  7. What a beautiful pocket and such an elegant cardigan!

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Recent Posts You Might Like

Made by a Fabricista: What to Make with Silk Taffeta

You may have noticed that Fabric Mart has a *HUGE* selection of silk taffeta right now.  A lot of it is either large plaid or large stripes.   I was curious about it, and not really sure what I could make with it, but I just knew it would be gorgeous fabric and had to play around with it.  Turns out, it's actually great for quite a range of projects!  The dress above is my third project. Let me show you the first two. My first was to make some queen size pillow shams.  They are the plaid ones in the back of the photo.  I also made the two printed ones in the center from another Fabric Mart home dec fabric special!  I wanted to make the covers removable with a zipper, and include a braided trim.  As luck would have it, I found a whole card of braided trim at an estate sale that worked with my taffeta for just $2! To start, I used a zipper foot to stitch down the braided trim all around one side of the pillow. Then I serged ...

Made By A Fabricista: Mechanic Chic!

When it comes to buying ready-to-wear garments as a sewist, I only ever spend in three categories: heavy duty winter jackets (life in Maine!), bras… and jumpsuits! I love a good jumpsuit, but unfortunately the ones I used to buy have been impacted by the tariff situation and I can’t get them affordably anymore. This can only mean one thing, folks: it’s time to roll up my sleeves and sew my very first jumpsuit!  When I started planning for this project, I knew I wanted to use a heavyweight linen for cozy comfort in the fall and breathability in the summer. I wanted something that would wear beautifully and soften with age, and something with neutral tones that could go with everything. Naturally, when I came across this 100% linen canvas on Fabric Mart, my heart skipped a beat! I love the ikat-inspired geometry and something about it reminds me of leopard spots too. Bold yet wearable! I am pretty sure this fabric was intended for home decor which I don’t mind at all and in fact of...

Made By A Fabricista: Tried and true summer basics that fit.

Happy Summer Friends! As I am writing this, we are headed into a nasty heat wave…so the timing could not be better to share two of my favorite summer patterns and fabrics.  But first, let me tell you about the fail I had heading into this month’s blog… As Fabricista’s, we get to pick out fabric for each of our blog submissions. I fell in love with this gorgeous lilac jacquard knit that I thought would be perfect for a pop of color in my summer wardrobe. But I made a fatal error - I grabbed a pattern I haven’t made for years, quickly went up one size to account for a few new pounds, and sewed them up. And they don’t fit, will NEVER fit, and will never be worn. Sigh…when will I learn?? Here’s a flat lay pic so we can at least look at the lovely fabric: The lesson I learned (relearned!) is that just like with off the rack clothes, the things that worked well for me years ago don’t work well for me today.  And that’s the case with both tops and bottoms. So I went back to two patt...

A Yard And Change

Do you have a fabric that you love and has been hanging around but is too small to use? Maybe you found a wonderful fabric with a super cute print but there's only a yard left.  I've got a few projects I worked on all with roughly a yard of fabric. And I have a few tips for making that yard and change go further! Cutting Layout: You can get a lot more mileage out of a yard of fabric if you can get creative with how you lay out your fabric. Cutting things single layer will give you the most control. My favorite thing to do is unfold the fabric and fold the selvages in to meet in the middle. That gives me two folded edges to work with. I had to overlap these to get enough width for the tank top. Just make sure that your pattern pieces don't also overlap!  This one was especially fun for me because I really loved the print on this swimwear knit but am not yet up to sewing swimwear. But a nice flowy hiking tank is perfect for this! In the future I'd love to experiment with...