Skip to main content

Made by a Fabricista: Wool/bamboo jersey knit cardigan

Helen's Closet Blackwood cardigan in wool/bamboo jersey knit

Hi everybody, it's Virginie from Jazz Couture and I'm excited to be part of the great Fabricistas team!

Here in eastern Canada, so far spring has brought us a cocktail of cold, wind and rain and it's not time yet for skirts and dresses. What I need now is transitional pieces, so for my first make as a Fabricista I opted for a cardigan and tried Helen's Closet Blackwood cardigan. Many sewists have made it since its release in spring 2017, and they definitely wetted my appetite for this pattern as there are many lovely versions of it on the internet!

Fabric:

The fabric I selected for this cardi is a wonderful wool/bamboo/lycra jersey, it's a lightweight, fine gauge knit that was just perfect for what I had in mind, i.e. a layering spring piece that is not too heavy but provides a little extra warmth on chilly days (and boy did we have a lot of those lately!).

The colour is called 'Stormy Seas' and it's still available here! It's a kind of gray with sage green undertones, a soft, flattering colour that goes with just about anything! Fabric Mart also has black and some grays available. That jersey knit is very refined and drapes beautifully. It's also very comfortable and not scratchy at all.


The colour of this wool jersey is called 'Stormy Seas'


Sizing and modifications:

This was my first time using a Helen's Closet pattern, and I selected a size small based on my measurements.  The fit is slim and it's just what I expected/wanted.

I elongated the bottom by 1 6/8''; it's not much but I think it makes the difference. As is, the proportions would have been sort of in between for my silhouette. I didn't use the cuffs for this version and instead turned a 1'' hem and finished the sleeve on the coverstitch. The sleeves are still plenty long and go beyond my wrist. I might use the cuff another time for a wintery version.


I turned a 1'' hem on the sleeve and finished it on the coverstitch


I rectified the shoulder seam as the angle was a bit weird (too forward next to the neck, and too backward at the shoulder tip).

I didn't do the pocket in two pieces as per the pattern and drafted my own pocket piece. Since I own a coverstitch, I turned a 1 1/2'' hem and finished it on the coverstitch for a RTW look.

Tip:

Which brings me to a tip I want to share with you. Patch pockets can be tricky with jersey knit material, as if you don't do anything the seams will often (if not always) come out wavy.

That tip is something I've come up with after some experiments to solve the wavy seams problem, and you might want to try it. Personally I don't fear patch pockets anymore in jersey knits, even with the most lightweight ones!

What I do is I make strips of featherweight interfacing, roughly the size of the seam allowances of the pocket (in this case 1 cm - 3/8''). I position them on the inside of the pocket and make sure to cover the seam allowance plus a little bit more.



Then I simply press the seams and topstitch on the sewing machine, preferably with a short stitch and fine matching thread if the fabric is lightweight. In this case what I had on hand is just regular serging thread, but still the result is perfectly fine. Look, no wavy seams!

A patch pocket on the Blackwood cardigan

I would also recommend that you make a test of a seam going across the grainline on fabric scraps and play with the differential feed on your serger, prior to assemble the bottom band to the bodice of the cardi. Often the fabric reacts differently when you sew it across the grain (than on the grain). I slightly decreased the differential feed on my serger to sew that seam and got a pretty even horizontal seam. Also, don't stretch the fabric when you feed it thru the serger!


Back view of the Blackwood cardigan


I think the wind made the two layers of the bottom band shift - usually I don't see those ripples!

I love my Blackwood cardigan; it's a casual layering piece and I know I'll be wearing it a lot this spring! The combination of wool and bamboo makes this jersey knit very soft and a pleasure to sew and wear.

I'll be seeing you again for another post in June - hopefully with a summery make! :-) Bye for now, and let me know if my little tip was useful to you!


Virginie

Comments

  1. Great tip re knit pockets! Thank you! I was just curious about why you wouldn't interface the whole pocket? Is it because it would make it too heavy? I often use a fusible knit tape by pellon to tape all the seams if the fabric is very drapey (like bamboo can be!) but especially across the shoulder seams. Love your blackwood and that fabric from FabricMart is beautiful!

    ReplyDelete
  2. Kathleen, I don't think interfacing the whole pocket would make it too heavy, but it would certainly stiffen it and I prefer the look of a soft pocket. Interfacing only the seam allowance does the job, plus the interfacing doesn't show on the outside. Yes, that fabric is gorgeous and I highly recommend it!

    ReplyDelete
  3. Love your cardigan. Thanks for your tips also.

    ReplyDelete
  4. A very well made cardy!
    Lee.

    ReplyDelete
  5. This is really beautiful and so well made. That sweater could be in an upscale boutique. I'm envious!!

    ReplyDelete
  6. Thank you Nancy! You could easily replicate it: Blackwood cardigan pattern + Stormy Seas wool/bamboo knit = your own cardi! :-) ...and it's an easy pattern to sew.

    ReplyDelete
  7. What a beautiful pocket and such an elegant cardigan!

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: A Wardrobe Staple for Spring - A Denim Coat

Hello Sewing Friends! It’s Sharon with Sharon Sews with my latest Fabricista make – a denim coat  for spring.  Denim is a wardrobe staple for many of us, and even more so this year with denim on denim looks coming back in style.  The denim I used is a medium weight cotton/lycra blend with about a 20% stretch selvage to selvage.  Fabric Mart always does an amazing job photographing and describing their fabrics, yet I still gasped in delight when I opened the package containing my denim.  It was even better than I had anticipated. This fabric would have worked well for a traditional denim jacket – one with button front closure, chest pockets with flaps, and a collar.   However, I have wanted to sew this open front coat with kimono inspired sleeves and big patch pockets since February 2021.  I saw it in that month’s  BurdaStyle Magazine, bookmarked the page, and promptly forgot about the coat.  It’s coat #105 if you’re interested in sewing one for yourself. Fortunately, I went on an organ

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month!  This year is the year I challenge my sewing skills.   I have wanted a moto jacket for some time.  Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one.  The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting.    Remember when I said I wanted to challenge my sewing skills?  😉 This fabric was beautiful but fragile to work with.  It was a great mental challenge that had me problem solving before sewing to avoid any potential problems.  I first traced out the pattern onto tissue paper to determine the fit.   I used scrap cotton fabric to sew up a “practice run” of the jacket.    I was pleasantly surprised at how easily the jacket comes together.   I sewed up the muslin in one evening.  It was time to cut into the beautifu

Made By A Fabricista: My Version of the Infamous DVF Wrap Dress

Just in case you are not aware, the iconic Diane Fustenberg wrap dress has turned 50 this year.  In celebration, Vogue has re-released the DVF Wrap Dress pattern, which now comes in extended sizes.  This dress is so classic and fits many different body types.  I got a hold of this pattern and decided this would be my birthday dress this year. This pattern is categorized as a Very Easy Vogue pattern, and I would have to agree with that. Wrap dresses are usually relatively simple to put together since there aren’t that many pattern pieces to sew together. I made View A in a size 22 and the only modification I made was to shorten the hem by 6 inches.  I will say that since I used a Ponte Knit , I could have gone down to a size 20.  I didn’t read the fabric suggestions before picking my fabric.  I’ve always remembered seeing the DVF Wrap dress in knits. After reviewing the fabric suggestions, they do say that you can use soft fabrics, like a Challis or a Chambray. As I mentioned, I’ve alwa